Introduction to Process Engineering using basic experimentsModule description #30048 / Version 9
- 4 CP
- Portfolio examination
- Graded
- Winter semester
- German
| Module / Version | #30048 / #9 |
|---|---|
| Validity | Since Summer semester 2026 |
| Available language(s) | English, German |
| Credit points | 4 |
| Person responsible for the module | Kraume, Matthias |
| Grading | Graded |
| Exam format | Portfolio examination |
| Language(s) of instruction | German |
Affiliation
| Faculty | Fakultät III |
|---|---|
| Institute | Institut für Prozess und Verfahrenstechnik |
| Academic chair | 33351300 FG Verfahrenstechnik |
Contact
| Office | ACK 7 |
|---|---|
| Contact person | Villwock, Jörn |
| E-mail address | sekretariat@vt.tu-berlin.de |
| Website | https://www.tu.berlin/verfahrenstechnik |
Learning outcomes
The students should
- know the basic and typical tasks of chemical and process engineering
- be able to plan and carry out experiments, interpret the experimental results and draw appropriate conclusions,
- be able to compare the results with known physical laws.
- understand aspects essential to laboratory work, such as care in carrying out experiments, error analysis and safety measures.
- work in small groups
The course provides
20% knowledge & understanding, 20% analysis & methodology, 20% research & evaluation
30% application & practice, 10% social skills
- know the basic and typical tasks of chemical and process engineering
- be able to plan and carry out experiments, interpret the experimental results and draw appropriate conclusions,
- be able to compare the results with known physical laws.
- understand aspects essential to laboratory work, such as care in carrying out experiments, error analysis and safety measures.
- work in small groups
The course provides
20% knowledge & understanding, 20% analysis & methodology, 20% research & evaluation
30% application & practice, 10% social skills
Content
- Basic experiments such as filtration experiments, determination of pump characteristics, turbulence measurements, viscosity measurements, surface tension measurements, heat conduction measurements.
- Simple, universally applicable standard measurement methods are used on elementary experimental equipment.
- Simple, universally applicable standard measurement methods are used on elementary experimental equipment.
Module components
Compulsory area
The following courses are mandatory for this module:
| Courses | Type | Number | Frequency | Language | Hours per week | Course catalog |
|---|---|---|---|---|---|---|
| Einführung in die Verfahrenstechnik anhand grundlegender Experimente | Internship | 0331 L 023 | Winter semester | [de] | 2 | ISIS |
Workload and credit points
Einführung in die Verfahrenstechnik anhand grundlegender Experimente (Internship)
| Workload description | Multiplier | Hours | Total |
|---|---|---|---|
| Attendance time | 2 | 40 h | 80 h |
| Preparation/follow-up | 1 | 40 h | 40 h |
| 120 h | |||
The workload of the module adds up to 120 hours. The module therefore comprises 4 credit points.
Description of teaching and learning methods
The laboratory work is carried out in small groups, where the evaluation and recording of experiments and the comparison with mathematical models are carried out independently.
The experimental facilities are located in the department's technical hall.
PCs with appropriate software are available for the evaluation of the experimental data.
Location of the course: Laboratory of the department at Ackerstr. 76
The experimental facilities are located in the department's technical hall.
PCs with appropriate software are available for the evaluation of the experimental data.
Location of the course: Laboratory of the department at Ackerstr. 76
Requirements for participation and examination
Desirable prerequisites for participation in the courses:
Basic knowledge of physics and chemistry.
Mandatory requirements for the module examination registration:
This module has no examination requirements.
Completion of the module
| Grading | Graded |
|---|---|
| Exam format | Portfolio examination |
| Type of portfolio examination | 100 points in total |
| Language | German |
Test elements
| Name | Points/Weight | Category | Duration/Extent |
|---|---|---|---|
| Documented practical performance (report) | 75 | written | approx. 60-100 pages per group |
| Fundamentals and knowledge test on experimental setup | 10 | oral | approx. 15 min. |
| Experiment preparation and execution | 15 | practical | approx. 60h |
Exam description
Grading according to scheme 2 of Fak. III, Pass 1/2, see appendix to module catalogue
Duration of the module
The following number of semesters is estimated for taking and completing the module: 1 semester(s).
This module can be started in the following semesters: Winter semester.
Maximum number of participants
The maximum capacity of participants is 18.
Registration procedures
IMPORTANT for the planning of the lab course in the department
The initial registration for the lab course takes place online via a list of participants on the ISIS platform:
Procedure:
1) Pre-registration list provided by the department via ISIS at the beginning of the semester.
2) Those interested in the course register with full details.
Students register for the portfolio examination online via MTS (Moses account).
1) Provision of the registration under the module number in the MTS by the department.
2) Those interested in the course register with full details including email.
3) If there are more than 18 registered students, the order of registration will decide.
4) Those who are not accepted will be informed and will be removed from the MTS.
The registration procedure is subject to the deadlines and dates set by the department.
For further information, please consult Website : www.tu.berlin/verfahrenstechnik
The initial registration for the lab course takes place online via a list of participants on the ISIS platform:
Procedure:
1) Pre-registration list provided by the department via ISIS at the beginning of the semester.
2) Those interested in the course register with full details.
Students register for the portfolio examination online via MTS (Moses account).
1) Provision of the registration under the module number in the MTS by the department.
2) Those interested in the course register with full details including email.
3) If there are more than 18 registered students, the order of registration will decide.
4) Those who are not accepted will be informed and will be removed from the MTS.
The registration procedure is subject to the deadlines and dates set by the department.
For further information, please consult Website : www.tu.berlin/verfahrenstechnik
Recommended reading, lecture notes
Lecture notes
unavailable
Electronic lecture notes
available – will be distributed to participants
Recommended literature
- siehe VL-Skript VT I
Assigned programs
This module version is used in the following programs:
| Program / program version | Semester(s) | Curriculum component |
|---|---|---|
| Energy Engineering and Process Engineering StuPO 2014 | SS 2026 | EPT Wahlpflichtlabor |
| WS 2026/27 | EPT Wahlpflichtlabor | |
| Industrial Engineering and Management Industrial Engineering and Management (B. Sc.) - StuPO 2015 | SS 2026 | Ingenieurwissenschaftliche Studienrichtungen › Chemie und Verfahrenstechnik (CVT) › Chemie und Verfahrenstechnik (Wahlpflicht) |
| WS 2026/27 | Ingenieurwissenschaftliche Studienrichtungen › Chemie und Verfahrenstechnik (CVT) › Chemie und Verfahrenstechnik (Wahlpflicht) |
Miscellaneous
Not specified