Operation of Process Engineering unitsModule description #30117 / Version 8
- 4 CP
- Portfolio examination
- Graded
- Summer semester
- German
This module description is not valid in the current semester (Winter semester 2026/27).
Current version (v9)
| Module / Version | #30117 / #8 |
|---|---|
| Validity | Summer semester 2024 – Winter semester 2024/25 |
| Available language(s) | German |
| Credit points | 4 |
| Person responsible for the module | Kraume, Matthias |
| Grading | Graded |
| Exam format | Portfolio examination |
| Language(s) of instruction | German |
Affiliation
| Faculty | Fakultät III |
|---|---|
| Institute | Institut für Prozess und Verfahrenstechnik |
| Academic chair | 33351300 FG Verfahrenstechnik |
Contact
| Office | ACK 7 |
|---|---|
| Contact person | Villwock, Jörn |
| E-mail address | sekretariat@vt.tu-berlin.de |
| Website | https://www.tu.berlin/verfahrenstechnik |
Learning outcomes
The students:
-know typical process engineering apparatus on a pilot plant scale,
-are able to prepare, carry out and evaluate experimental investigations independently and compare the results with theoretical models,
have in-depth knowledge of problem-oriented experimentation and evaluation, building on the theoretical knowledge they have acquired,
-are familiar with methods for investigating various process parameters and can evaluate them.
-work together in small groups
-know typical process engineering apparatus on a pilot plant scale,
-are able to prepare, carry out and evaluate experimental investigations independently and compare the results with theoretical models,
have in-depth knowledge of problem-oriented experimentation and evaluation, building on the theoretical knowledge they have acquired,
-are familiar with methods for investigating various process parameters and can evaluate them.
-work together in small groups
Content
Course content
- Typical investigations of the basic characteristics of process engineering equipment
- Experiments on the stirred test rig (gas introduction and suspension)
- Scale up using the performance characteristics of a non-Newtonian fluid
- Pressure loss and pressure profile in a fluidized bed with different solids
- Pressure loss, void ratio and operating conditions of a packed column
- Determination of the average and local gas content as well as the dispersion coefficient of a bubble column
- Typical investigations of the basic characteristics of process engineering equipment
- Experiments on the stirred test rig (gas introduction and suspension)
- Scale up using the performance characteristics of a non-Newtonian fluid
- Pressure loss and pressure profile in a fluidized bed with different solids
- Pressure loss, void ratio and operating conditions of a packed column
- Determination of the average and local gas content as well as the dispersion coefficient of a bubble column
Module components
Compulsory area
The following courses are mandatory for this module:
| Courses | Type | Number | Frequency | Language | Hours per week | Course catalog |
|---|---|---|---|---|---|---|
| Betrieb verfahrenstechnischer Maschinen und Apparate | Internship | 0331 L 014 | Summer semester | [de] | 2 | ISIS |
Workload and credit points
Betrieb verfahrenstechnischer Maschinen und Apparate (Internship)
| Workload description | Multiplier | Hours | Total |
|---|---|---|---|
| Präsenzzeit | 2 | 40 h | 80 h |
| Vor-/Nachbereitung | 2 | 20 h | 40 h |
| 120 h | |||
The workload of the module adds up to 120 hours. The module therefore comprises 4 credit points.
Description of teaching and learning methods
The practical course is carried out in small groups, with students evaluating and recording experiments and comparing them with mathematical models independently. The pilot plants with the corresponding measurement technology are available in the technical center of the department. PCs with suitable software are available for evaluating the experimental data.
Venue: Laboratory of the department, Ackerstr. 76, 13355 Berlin
Current notice:
Subject to further changes due to Covid19, the practicals will take place in presence in compliance with the hygiene requirements.
Venue: Laboratory of the department, Ackerstr. 76, 13355 Berlin
Current notice:
Subject to further changes due to Covid19, the practicals will take place in presence in compliance with the hygiene requirements.
Requirements for participation and examination
Desirable prerequisites for participation in the courses:
VL Process Engineering I and II, EPT I WP Laboratory (basic practical course)
Mandatory requirements for the module examination registration:
This module has no examination requirements.
Completion of the module
| Grading | Graded |
|---|---|
| Exam format | Portfolio examination |
| Type of portfolio examination | 100 points in total |
| Language | German |
Test elements
| Name | Points/Weight | Category | Duration/Extent |
|---|---|---|---|
| Kenntnisprüfung vor / während der Versuche (Rücksprache) Gewichtung 25% | 25 | oral | laufend |
| Protokollierte praktische Leistung (Bericht) Gewichtung 75 % | 75 | written | Umfang Bericht je nach Versuch |
Exam description
Existence limit 2/3
Duration of the module
The following number of semesters is estimated for taking and completing the module: 1 semester(s).
This module can be started in the following semesters: Summer semester.
Maximum number of participants
The maximum capacity of participants is 18.
Registration procedures
Students register for the portfolio examination online via the MTS (Moses account)
1) Provision of the registration under the module number in the MTS by the FG
2) Participation - those interested in the course register with full details including email
3) If there are more than 18 registered students, the order of registration is decisive.
4) Students who are not accepted will be informed and deregistered in the MTS
The deadlines/deadlines specified by the department apply to the registration procedure.
1) Provision of the registration under the module number in the MTS by the FG
2) Participation - those interested in the course register with full details including email
3) If there are more than 18 registered students, the order of registration is decisive.
4) Students who are not accepted will be informed and deregistered in the MTS
The deadlines/deadlines specified by the department apply to the registration procedure.
Recommended reading, lecture notes
Lecture notes
unavailable
Electronic lecture notes
available – Das Skript wird den Teilnehmern am Praktikum zugesandt
Recommended literature
- siehe VL-Skript (Verfahrenstechnik I + II)
Assigned programs
This module version is used in the following programs:
| Program / program version | Semester(s) | Curriculum component |
|---|---|---|
| Chemical Engineering MSc_ChemIng_2020 | SS 2024 | Wahlpflichtmodule › Prozesstechnik |
| WS 2024/25 | Wahlpflichtmodule › Prozesstechnik |
Master's in Energy and Process Engineering, Master's in Renewable Energy Systems
Part of the module list "EVT elective laboratory II"
Part of the module list "EVT elective laboratory II"
Miscellaneous
Not specified