Skip to content
Technische Universität Berlin Deutsch
Course catalog and module transfer system

Thermal Separation Technology LabModule description #30125 / Version 3

← Module page Deutsche Fassung
This module description is not valid in the current semester (Winter semester 2026/27). Current version (v7)
Module / Version#30125 / #3
ValidityWinter semester 2022/23 – Winter semester 2022/23
Available language(s)German
Credit points4
Person responsible for the moduleRepke, Jens-Uwe
GradingGraded
Exam formatPortfolio examination
Language(s) of instructionGerman

Affiliation

FacultyFakultät III
InstituteInstitut für Prozess und Verfahrenstechnik
Academic chair33351500 FG Dynamik und Betrieb technischer Anlagen

Contact

OfficeKWT 9
Contact personRohde, Niclas
E-mail addresslehre@dbta.tu-berlin.de
Websitehttps://www.tu.berlin/dbta/studium-lehre/praktika-und-projekte/praktikum-tgo

Learning outcomes

Die Studierenden:

-besitzen vertiefte Kenntnisse von Thermische Grundoperationen der Verfahrenstechnik durch die praktische Erfahrungen mit Versuchsanlagen im halbtechnischen Maßstab,

-kennen verschiedene messtechnische Verfahren, können diese anwenden und bewerten,

-können Versuche in eigenständiger Arbeit vorbereiten, durchführen und auswerten.

Die Veranstaltung vermittelt:
20% Wissen und Verstehen, 20% Analyse und Methodik, 20% Entwicklung und Design,
20% Recherche und Bewertung, 20% Anwendung und Praxis

Content

Experimente zu folgenden Grundoperationen:

-Rektifikation
-Extraktion
-Absorption
-Membranverfahren

Zusätzlich werden messtechnische Verfahren z.B. der Konzentrationsmessung und Techniken der Modellierung von Daten und die Beschaffung von Daten aus der Literatur behandelt.

Module components

Compulsory area

The following courses are mandatory for this module:

CoursesTypeNumberFrequencyLanguageHours per weekCourse catalog
Thermische Grundoperationen der VerfahrenstechnikInternship0339 L 498 Winter and summer semester[de]4 ISIS

Courses in the course catalog

Courses created from the teaching units of this module.

Winter semester 2026/27 (1)

Thermische Grundoperationen der Verfahrenstechnik (Internship) 1

All groups of this course in the catalog

Workload and credit points

Thermische Grundoperationen der Verfahrenstechnik (Internship)

Workload descriptionMultiplierHoursTotal
Erstellung Protokolle160 h60 h
Präsenzzeit Einführung und Versuche150 h50 h
Vorbereitung Versuche110 h10 h
120 h

The workload of the module adds up to 120 hours. The module therefore comprises 4 credit points.

Description of teaching and learning methods

The practical courses are carried out in small groups, whereby the experiments, logging or the solution of the tasks are carried out independently but under supervision. The pilot plants with the associated measurement technology and process control technology are available in the technical center of the department. The necessary software for identification and model developemnt is available in the department's PC pool.
The lab is offered as a block course.

Requirements for participation and examination

Desirable prerequisites for participation in the courses:

"Thermodynamik II" and "Thermische Grundoperationen der Verfahrenstechnik" or equivalent courses strongly recommended. Understanding necessary to perform the work!

Mandatory requirements for the module examination registration:

This module has no examination requirements.

Completion of the module

GradingGraded
Exam formatPortfolio examination
Type of portfolio examination100 points in total
LanguageGerman

Test elements

NamePoints/WeightCategoryDuration/Extent
Durchführung der Experimente40practical24 h
Praktikumgsbericht60writtenmax. 60 Seiten

Exam description

Grading of the individual elements as well as the grading scheme will be announced at the beginning of the semester.
Protocols prepared (in groups of 2-3 students each) will be graded. In addition, the experimental work will be evaluated in general and on the basis of oral discussions.

Duration of the module

The following number of semesters is estimated for taking and completing the module: 1 semester(s).

This module can be started in the following semesters: Winter and summer semester.

Maximum number of participants

The maximum capacity of participants is 15.

Registration procedures

The registration of the lab takes place in the examination office or via online examination registration. Registration must take place up to one working day before the first graded element.

Registration for the course at:
https://www.tu.berlin/dbta/studium-lehre/praktika-exkursionen/

The website of the department or ISIS provides information on specific dates of the exam. There is a 5-day attendance period for conducting the experiments. Subsequently, a written report has to be handed in within 4 weeks after the end of the practical part.

Recommended reading, lecture notes

Lecture notes

unavailable

Electronic lecture notes

available – Die Skripte werden zeitnah vor Praktikumsbeginn an bestätigte Teilnehmer versendet

Recommended literature

  • Baehr, Hans Dieter; Stephan, Karl: Wärme- und Stoffübertragung. 2. Aufl. Berlin: Springer, 1996.
  • Gmehling, Jürgen; Brehm, Axel: Grundoperationen - Lehrbuch der Technischen Chemie, Band 2. 1. Aufl. Stuttgart: Georg Thieme, 1996.
  • Gmehling, Jürgen; Kolbe, Bärbel: Thermodynamik. 2. Aufl. Weinheim: VCH, 1992.
  • Sattler, Klaus: Thermische Trennverfahren - Grundlagen, Auslegung, Apparate. 1. Aufl. Weinheim: VCH, 1988.
  • Vauck, Wilhelm R. A.; Müller, Hermann A.: Grundoperationen chemischer Verfahrenstechnik. 10. Aufl. Leipzig: Deutscher Verlag für Grundstoffindustrie, 1994

Assigned programs

This module is not used in any program.

Master Energie- und Verfahrenstechnik, Master Regenerative Energiesysteme, Master PEESE
Part of module list „EVT- Wahlpflichtlabor II“

Miscellaneous

In case of high demand, the internship can be offered 2x per semester.
The module can be completed in 2-3 weeks.