Skip to content
Technische Universität Berlin Deutsch
Course catalog and module transfer system

Thermal Separation Technology LabModule description #30125 / Version 4

← Module page Deutsche Fassung
This module description is not valid in the current semester (Winter semester 2026/27). Current version (v7)
Module / Version#30125 / #4
ValiditySummer semester 2023 – Winter semester 2024/25
Available language(s)English, German
Credit points4
Person responsible for the moduleRepke, Jens-Uwe
GradingGraded
Exam formatPortfolio examination
Language(s) of instructionGerman

Affiliation

FacultyFakultät III
InstituteInstitut für Prozess und Verfahrenstechnik
Academic chair33351500 FG Dynamik und Betrieb technischer Anlagen

Contact

OfficeKWT 9
Contact personRohde, Niclas
E-mail addresslehre@dbta.tu-berlin.de
Websitehttps://www.tu.berlin/dbta/studium-lehre/praktika-und-projekte/praktikum-tgo

Learning outcomes

Students:

-Possess in-depth knowledge of basic thermal operations in process engineering through hands-on experience with experimental plants on a semi-industrial scale,

-know different measurement methods, can apply and evaluate them,

-are able to prepare, carry out and evaluate experiments in independent work.

The course imparts:
20% knowledge and understanding, 20% analysis and methodology, 20% development and design,
20% research and evaluation, 20% application and practice

Content

Experiments on the following basic operations:

-distillation
-extraction
-absorption
-chromatography
-membrane process

In addition, measurement techniques e.g. of concentration measurement and techniques of modeling data and obtaining data from the literature will be covered.

Module components

Compulsory area

The following courses are mandatory for this module:

CoursesTypeNumberFrequencyLanguageHours per weekCourse catalog
Thermische Grundoperationen der VerfahrenstechnikInternship0339 L 498 Winter and summer semester[de]4 ISIS

Courses in the course catalog

Courses created from the teaching units of this module.

Winter semester 2026/27 (1)

Thermische Grundoperationen der Verfahrenstechnik (Internship) 1

All groups of this course in the catalog

Workload and credit points

Thermische Grundoperationen der Verfahrenstechnik (Internship)

Workload descriptionMultiplierHoursTotal
Write report160 h60 h
Attendance time for introduction and experiments150 h50 h
Preparation experiments110 h10 h
120 h

The workload of the module adds up to 120 hours. The module therefore comprises 4 credit points.

Description of teaching and learning methods

The practical courses are carried out in small groups, whereby the experiments, logging or the solution of the tasks are carried out independently but under supervision. The pilot plants with the associated measurement technology and process control technology are available in the technical center of the department. The necessary software for identification and model developemnt is available in the department's PC pool.
The lab is offered as a block course.

Requirements for participation and examination

Desirable prerequisites for participation in the courses:

"Thermodynamik II" and "Thermische Grundoperationen der Verfahrenstechnik" or equivalent courses strongly recommended. Understanding necessary to perform the work!

Mandatory requirements for the module examination registration:

This module has no examination requirements.

Completion of the module

GradingGraded
Exam formatPortfolio examination
Type of portfolio examination100 points in total
LanguageGerman

Test elements

NamePoints/WeightCategoryDuration/Extent
Conduction of experiments40practical24 h
Written report60writtenmax. 60 pages

Exam description

Grading of the individual elements as well as the grading scheme will be announced at the beginning of the semester.
Protocols prepared (in groups of 2-3 students each) will be graded. In addition, the experimental work will be evaluated in general and on the basis of oral discussions.

Duration of the module

The following number of semesters is estimated for taking and completing the module: 1 semester(s).

This module can be started in the following semesters: Winter and summer semester.

Maximum number of participants

The maximum capacity of participants is 15.

Registration procedures

The registration of the lab takes place in the examination office or via online examination registration. Registration must take place up to one working day before the first graded element.

Registration for the course at:
https://www.tu.berlin/dbta/studium-lehre/praktika-exkursionen/

The website of the department or ISIS provides information on specific dates of the exam. There is a 5-day attendance period for conducting the experiments. Subsequently, a written report has to be handed in within 4 weeks after the end of the practical part.

Recommended reading, lecture notes

Lecture notes

unavailable

Electronic lecture notes

available – The scripts will be sent to confirmed participants close before the start of the lab course

Recommended literature

  • Baehr, Hans Dieter; Stephan, Karl: Wärme- und Stoffübertragung. 2. Aufl. Berlin: Springer, 1996.
  • Gmehling, Jürgen; Brehm, Axel: Grundoperationen - Lehrbuch der Technischen Chemie, Band 2. 1. Aufl. Stuttgart: Georg Thieme, 1996.
  • Gmehling, Jürgen; Kolbe, Bärbel: Thermodynamik. 2. Aufl. Weinheim: VCH, 1992.
  • Sattler, Klaus: Thermische Trennverfahren - Grundlagen, Auslegung, Apparate. 1. Aufl. Weinheim: VCH, 1988.
  • Vauck, Wilhelm R. A.; Müller, Hermann A.: Grundoperationen chemischer Verfahrenstechnik. 10. Aufl. Leipzig: Deutscher Verlag für Grundstoffindustrie, 1994

Assigned programs

This module is not used in any program.

Master Energie- und Verfahrenstechnik, Master Regenerative Energiesysteme, Master PEESE
Part of module list „EVT- Wahlpflichtlabor II“

Miscellaneous

In case of high demand, the internship can be offered 2x per semester.
The module can be completed in 2-3 weeks.