Process Modeling LabModule description #30126 / Version 7
- 4 CP
- Portfolio examination
- Graded
- Winter and summer semester
| Module / Version | #30126 / #7 |
|---|---|
| Validity | Since Winter semester 2025/26 |
| Available language(s) | English, German |
| Credit points | 4 |
| Person responsible for the module | Repke, Jens-Uwe |
| Grading | Graded |
| Exam format | Portfolio examination |
| Language(s) of instruction | Not specified |
Affiliation
| Faculty | Fakultät III |
|---|---|
| Institute | Institut für Prozess und Verfahrenstechnik |
| Academic chair | 33351500 FG Dynamik und Betrieb technischer Anlagen |
Contact
| Office | KWT 9 |
|---|---|
| Contact person | Rohde, Niclas |
| E-mail address | lehre@dbta.tu-berlin.de |
| Website | https://www.tu.berlin/dbta/studium-lehre/praktika-und-projekte/labor-pad |
Learning outcomes
Students:
-have in-depth knowledge of step responses, transfer function, model validation, design of experiments, process dynamics, measurement techniques, process control technology,
-are able to plan, carry out and evaluate experiments and, if necessary, to make modifications to the experimental equipment,
-have knowledge of laboratories, plant operation, calibration of sensors, and interaction of sensors and actuators,
-know and can evaluate approaches for developing optimized solutions and process control concepts,
-have the ability to "think in models".
The course imparts:
20% knowledge and understanding, 20% analysis and methodology, 20% development and design,
20% research and evaluation, 20% application and practice
-have in-depth knowledge of step responses, transfer function, model validation, design of experiments, process dynamics, measurement techniques, process control technology,
-are able to plan, carry out and evaluate experiments and, if necessary, to make modifications to the experimental equipment,
-have knowledge of laboratories, plant operation, calibration of sensors, and interaction of sensors and actuators,
-know and can evaluate approaches for developing optimized solutions and process control concepts,
-have the ability to "think in models".
The course imparts:
20% knowledge and understanding, 20% analysis and methodology, 20% development and design,
20% research and evaluation, 20% application and practice
Content
Investigation on test stands:
-continuous and discontinuous distillation
-operation of a mini-plant with modern process control technology
-controller design and process dynamics
-modeling and experimental validation for liquid-liquid separations
Typical tasks :
-realization of a process control concept in the process control system
-Recording of step responses and design as well as test of different controller structures
-Development of a start-up concept for a column
-Modeling, derivation of experimental design, and model validation based on measurements
-continuous and discontinuous distillation
-operation of a mini-plant with modern process control technology
-controller design and process dynamics
-modeling and experimental validation for liquid-liquid separations
Typical tasks :
-realization of a process control concept in the process control system
-Recording of step responses and design as well as test of different controller structures
-Development of a start-up concept for a column
-Modeling, derivation of experimental design, and model validation based on measurements
Module components
Compulsory area
The following courses are mandatory for this module:
| Courses | Type | Number | Frequency | Language | Hours per week | Course catalog |
|---|---|---|---|---|---|---|
| PAD I - Grundlagen | Internship | 0339 L 416 | Winter and summer semester | [en, de] | 2 | WS 2026/27 (1) ISIS |
| PAD II - Vertiefung | Internship | 0339 L 415 | Winter and summer semester | [en, de] | 2 | WS 2026/27 (1) ISIS |
Courses in the course catalog
Courses created from the teaching units of this module.
Winter semester 2026/27 (2)
PAD I - Grundlagen (Internship) 1
- PAD I - Grundlagen (Praktikum) Blockveranstaltung Di. 09.03.27- Fr. 12.03.2027, 9-15 Uhr 0339 L 416
PAD II - Vertiefung (Internship) 1
- PAD II - Vertiefung (Praktikum) Blockveranstaltung Mo. 15.03.27- Fr. 19.03.2027, 9-15 Uhr 0339 L 415
Workload and credit points
PAD I - Grundlagen (Internship)
| Workload description | Multiplier | Hours | Total |
|---|---|---|---|
| Lab evaluation and preparation of presentation | 1 | 35 h | 35 h |
| Attendance | 2.5 | 8 h | 20 h |
| Pre/post processing | 2.5 | 2 h | 5 h |
| 60 h | |||
PAD II - Vertiefung (Internship)
| Workload description | Multiplier | Hours | Total |
|---|---|---|---|
| Lab evaluation and preparation of presentation | 1 | 35 h | 35 h |
| Work in presence | 2.5 | 8 h | 20 h |
| Pre/post processing | 2.5 | 2 h | 5 h |
| 60 h | |||
The workload of the module adds up to 120 hours. The module therefore comprises 4 credit points.
Description of teaching and learning methods
The practical courses are carried out in small groups, whereby the experiments, logging or the solution of the tasks are carried out independently but under supervision. The pilot plants with the associated measurement technology and process control technology are available in the technical center of the department. The necessary software for identification and model developemnt is available in the department's PC pool.
The lab is offered as a block course.
The lab is offered as a block course.
Requirements for participation and examination
Desirable prerequisites for participation in the courses:
Attendance of the courses “Process Modeling”, “Thermodynamics II”, and “Thermal Process Engineering” or equivalent courses is strongly recommended, as a theoretical understanding of the content is necessary for safety reasons in order to carry out the work.
Mandatory requirements for the module examination registration:
This module has no examination requirements.
Completion of the module
| Grading | Graded |
|---|---|
| Exam format | Portfolio examination |
| Type of portfolio examination | 100 points in total |
| Language | English, German |
Test elements
| Name | Points/Weight | Category | Duration/Extent |
|---|---|---|---|
| Conduction of experiments | 34 | practical | ca. 40 hours |
| Documentation of the experiments (pure protocol, no extra report) | 33 | written | 5 pages max |
| Presentation of results (presentation) and subsequent discussion | 33 | oral | 15 minutes presentation per student, 20 minutes discussion |
Duration of the module
The following number of semesters is estimated for taking and completing the module: 1 semester(s).
This module can be started in the following semesters: Winter and summer semester.
Maximum number of participants
The maximum capacity of participants is 15.
Registration procedures
Registration for the event at:
https://www.tu.berlin/en/dbta/study/lab-courses-and-projects
Exam registration takes place via the MTS.
https://www.tu.berlin/en/dbta/study/lab-courses-and-projects
Exam registration takes place via the MTS.
Recommended reading, lecture notes
Lecture notes
unavailable
Electronic lecture notes
available – The scripts will be sent to confirmed participants close before the start of the lab course
Recommended literature
No recommended literature given
Assigned programs
This module version is used in the following programs:
| Program / program version | Semester(s) | Curriculum component |
|---|---|---|
| Energy Engineering and Process Engineering StuPO 2009 | WS 2025/26 | EVT-Wahlpflichtlabor II |
| SS 2026 | EVT-Wahlpflichtlabor II | |
| WS 2026/27 | EVT-Wahlpflichtlabor II | |
| Regenerative Energy Systems StuPO 2009 | WS 2025/26 | EVT-Wahlpflichtlabor II |
| SS 2026 | EVT-Wahlpflichtlabor II | |
| WS 2026/27 | EVT-Wahlpflichtlabor II |
Miscellaneous
The module can be completed in 1 week.