Industrial manufacturing equipment and process control in brewing and beverage technologyModule description #30127 / Version 2
- 7 CP
- Oral exam
- Graded
- Winter and summer semester
- German
This module description is not valid in the current semester (Winter semester 2026/27).
| Module / Version | #30127 / #2 |
|---|---|
| Validity | WS 2019/20 – Summer semester 2021 |
| Available language(s) | German |
| Credit points | 7 |
| Person responsible for the module | Flöter, Eckhard |
| Grading | Graded |
| Exam format | Oral exam |
| Language(s) of instruction | German |
Affiliation
| Faculty | Fakultät III |
|---|---|
| Institute | Institut für Lebensmitteltechnologie und Chemie |
| Academic chair | 33321900 FG Brau- und Getränketechnologie |
Contact
| Office | Not specified |
|---|---|
| Contact person | Gibson, Brian Richard |
| E-mail address | brian.gibson@tu-berlin.de |
| Website | Not specified |
Learning outcomes
Upon completion of the module Plant Engineering and Process Control in the Brewery and Beverage Industry for the Master's degree, students acquire the following knowledge:
- Functional procedures for the operation of the production facilities
- Successful and responsible management of production plants
- Key performance indicators of brewery plants
- Planning: Knowledge of planning using morphological systems according to Zwicky, Gant-diagram and equivalent systems as well
- Ability to design and calculate plant sizes and their interrelations
- Knowledge of the theoretical principles of process automation
- Ability to configure process modules and their programming
This course provides:
technical expertise 40%, methodological expertise 30%, systems expertise 20%, social skills 10%
- Functional procedures for the operation of the production facilities
- Successful and responsible management of production plants
- Key performance indicators of brewery plants
- Planning: Knowledge of planning using morphological systems according to Zwicky, Gant-diagram and equivalent systems as well
- Ability to design and calculate plant sizes and their interrelations
- Knowledge of the theoretical principles of process automation
- Ability to configure process modules and their programming
This course provides:
technical expertise 40%, methodological expertise 30%, systems expertise 20%, social skills 10%
Content
The module is divided into three courses.
In the lecture " Machinery and Equipment in the brewery" the following contents are taught:
- Performance indicators: Determination e.g. on the basis of DIN standard documents...
- Consumption figures: (energy, water, consumables), benchmarks, optimization
- Maintenance: theory and concepts
- Special knowledge in plant details and areas such as material selection and packaging
- Overview of content-related research projects and research trends
The lecture "Design of brewery plants" includes the following contents:
- Basics of planning
- Calculations of the specific equipment sizes and their logical relationship
- Practical use of an Excel tool for calculation
- Independent evaluation of the system planning
The practical course process automation in the brewery includes the following contents:
- Theoretical basics of automation technology
- Installation and configuration of the hardware components
- Practical application of specific automation technology using control modules or in practice
- Independent programming on simulation modules
In the lecture " Machinery and Equipment in the brewery" the following contents are taught:
- Performance indicators: Determination e.g. on the basis of DIN standard documents...
- Consumption figures: (energy, water, consumables), benchmarks, optimization
- Maintenance: theory and concepts
- Special knowledge in plant details and areas such as material selection and packaging
- Overview of content-related research projects and research trends
The lecture "Design of brewery plants" includes the following contents:
- Basics of planning
- Calculations of the specific equipment sizes and their logical relationship
- Practical use of an Excel tool for calculation
- Independent evaluation of the system planning
The practical course process automation in the brewery includes the following contents:
- Theoretical basics of automation technology
- Installation and configuration of the hardware components
- Practical application of specific automation technology using control modules or in practice
- Independent programming on simulation modules
Module components
Compulsory area
The following courses are mandatory for this module:
| Courses | Type | Number | Frequency | Language | Hours per week | Course catalog |
|---|---|---|---|---|---|---|
| Anlagentechnik in der Brau- und Getränkeindustrie | Lecture | 0335 L 299 | Winter semester | [en] | 2 | ISIS |
| Auslegung von Brauereianlagen | Lecture | 0335 L 357 | Winter and summer semester | [de] | 2 | ISIS |
| Prozessautomatisierung von Brauereianlagen | Internship | 0335 L 208 | Summer semester | [de] | 2 | ISIS |
Workload and credit points
Anlagentechnik in der Brau- und Getränkeindustrie (Lecture)
| Workload description | Multiplier | Hours | Total |
|---|---|---|---|
| Präsenzzeit | 15 | 2 h | 30 h |
| Vor- und Nachbereitung | 1 | 20 h | 20 h |
| 50 h | |||
Auslegung von Brauereianlagen (Lecture)
| Workload description | Multiplier | Hours | Total |
|---|---|---|---|
| Präsenzzeit | 15 | 2 h | 30 h |
| Vor- und Nachbereitung | 1 | 20 h | 20 h |
| 50 h | |||
Prozessautomatisierung von Brauereianlagen (Internship)
| Workload description | Multiplier | Hours | Total |
|---|---|---|---|
| Präsenzzeit | 15 | 2 h | 30 h |
| Vor- und Nachbereitung | 1 | 20 h | 20 h |
| 50 h | |||
Course-independent workload
| Workload description | Multiplier | Hours | Total |
|---|---|---|---|
| Prüfungsvorbereitung | 1 | 60 h | 60 h |
| 60 h | |||
The workload of the module adds up to 210 hours. The module therefore comprises 7 credit points.
Description of teaching and learning methods
The module is divided into two lectures in which theoretical basics of plant engineering and the design of brewery plants by means of computers are taught. The knowledge gained is discussed during the lectures.
In the practical course "Process automation of brewery plants", with the help of electronic learning media, the theoretical basics of process automation and the application areas of process automation in breweries are introduced and then put into practice directly with the students. In this regard, the hardware is set up on computers, process modules and control units and the basics of automation using SIMATIC S7 - STEP 7 are learned and discussed with the help of practical examples. The practical course is concluded with a programming task in which the students, mostly on their own, automate a simulated process.
In the practical course "Process automation of brewery plants", with the help of electronic learning media, the theoretical basics of process automation and the application areas of process automation in breweries are introduced and then put into practice directly with the students. In this regard, the hardware is set up on computers, process modules and control units and the basics of automation using SIMATIC S7 - STEP 7 are learned and discussed with the help of practical examples. The practical course is concluded with a programming task in which the students, mostly on their own, automate a simulated process.
Requirements for participation and examination
Desirable prerequisites for participation in the courses:
Bachelor in Brau- und Getränkeindustrie, Biotechnologie oder verwandten Fachrichtungen
Mandatory requirements for the module examination registration:
This module has no examination requirements.
Completion of the module
| Grading | Graded |
|---|---|
| Exam format | Oral exam |
| Language | English, German |
Duration of the module
The following number of semesters is estimated for taking and completing the module: 2 semester(s).
This module can be started in the following semesters: Winter and summer semester.
Maximum number of participants
This module is not limited to a number of students.
Registration procedures
Registration in the lists displayed at the beginning of the lecture or the first lecture course (Sekr. GG 4).
Recommended reading, lecture notes
Lecture notes
unavailable
Electronic lecture notes
available – (Wird in den Vorlesungen bekannt gegeben)
Recommended literature
- Literaturhinweise werden in den Veranstaltungen bekannt gegeben.
Assigned programs
This module is not used in any program.
Miscellaneous
The number of participants in the lectures is unlimited. The practical course is limited to a maximum of 20 participants.