Introduction to applied Computational Fluid DynamicsModule description #30148 / Version 7
- 2 CP
- Portfolio examination
- Graded
- Winter semester
- German
This module description is not valid in the current semester (Winter semester 2026/27).
Current version (v8)
| Module / Version | #30148 / #7 |
|---|---|
| Validity | Summer semester 2025 – Winter semester 2025/26 |
| Available language(s) | German |
| Credit points | 2 |
| Person responsible for the module | Kraume, Matthias |
| Grading | Graded |
| Exam format | Portfolio examination |
| Language(s) of instruction | German |
Affiliation
| Faculty | Fakultät III |
|---|---|
| Institute | Institut für Prozess und Verfahrenstechnik |
| Academic chair | 33351300 FG Verfahrenstechnik |
Contact
| Office | ACK 7 |
|---|---|
| Contact person | Böhm, Lutz |
| E-mail address | sekretariat@vt.tu-berlin.de |
| Website | https://www.tu.berlin/verfahrenstechnik |
Learning outcomes
The students:
-know the procedure for the numerical simulation of process engineering equipment,
-understand the mathematical-physical fundamentals of numerical flow simulation and -are able to apply these in commercial programs,
-have the ability to develop and innovate simulation programs,
-are able to deal with complex tasks and work independently,
have problem-solving skills and the ability to work in a team.
The course teaches:
20% knowledge and understanding, 20% research, analysis and methodology, 20% development and design, 20% application and practice, 20% social skills
-know the procedure for the numerical simulation of process engineering equipment,
-understand the mathematical-physical fundamentals of numerical flow simulation and -are able to apply these in commercial programs,
-have the ability to develop and innovate simulation programs,
-are able to deal with complex tasks and work independently,
have problem-solving skills and the ability to work in a team.
The course teaches:
20% knowledge and understanding, 20% research, analysis and methodology, 20% development and design, 20% application and practice, 20% social skills
Content
-Solution of process engineering problems using commercial CFD software (STAR-CCM+)
-Introduction to the commercial code STAR-CCM+
-Examples: Plate, gap, pipe, fixed beds, stirred tank, chemical reactions
-Introduction to the commercial code STAR-CCM+
-Examples: Plate, gap, pipe, fixed beds, stirred tank, chemical reactions
Module components
Compulsory area
The following courses are mandatory for this module:
| Courses | Type | Number | Frequency | Language | Hours per week | Course catalog |
|---|---|---|---|---|---|---|
| CFD - Numerische Übung zu aktuellen Forschungsfragen | Exercise | 0331 L 015-1 | Winter and summer semester | [de] | 1 | ISIS |
Workload and credit points
CFD - Numerische Übung zu aktuellen Forschungsfragen (Exercise)
| Workload description | Multiplier | Hours | Total |
|---|---|---|---|
| Präzenzeit | 40 | 1 h | 40 h |
| Vor- und Nachbereitung (Bericht) | 20 | 1 h | 20 h |
| 60 h | |||
The workload of the module adds up to 60 hours. The module therefore comprises 2 credit points.
Description of teaching and learning methods
The respective exercise is carried out in consultation between the student and the research assistants, whereby the solution of the task and logging or comparison with mathematical models is carried out independently. PCs with suitable software/licenses are available.
Venue: PC pool in the ACK building or by arrangement
Venue: PC pool in the ACK building or by arrangement
Requirements for participation and examination
Desirable prerequisites for participation in the courses:
Desirable: Attendance of the course: CFD in process engineering
necessary: knowledge of VT I and EISI/II or fluid mechanics
necessary: knowledge of VT I and EISI/II or fluid mechanics
Mandatory requirements for the module examination registration:
This module has no examination requirements.
Completion of the module
| Grading | Graded |
|---|---|
| Exam format | Portfolio examination |
| Type of portfolio examination | 100 points in total |
| Language | German |
Test elements
| Name | Points/Weight | Category | Duration/Extent |
|---|---|---|---|
| Written elaboration of exercises with solution and documentation of the solution (report) Weighting 90% | 90 | written | 5 hours |
| Final consultation on the work results | 10 | oral | appr. 15 Min. |
Exam description
Portfolio examination (grading according to scheme 1 of Fak. III Passing grade 2/3 s. Appendix to the module catalog)
Duration of the module
The following number of semesters is estimated for taking and completing the module: 1 semester(s).
This module can be started in the following semesters: Winter semester.
Maximum number of participants
The maximum capacity of participants is 1.
Registration procedures
Registration for the portfolio examination takes place via the MTS, but only after consultation with the
responsible research assistant,
For further information see Website: www.verfahrenstechnik.tu-berlin.de
The exercises are offered as a block course (1 week) and should be completed in one semester.
Maximum number of participants: 1 (individual performance / assignment by arrangement)
responsible research assistant,
For further information see Website: www.verfahrenstechnik.tu-berlin.de
The exercises are offered as a block course (1 week) and should be completed in one semester.
Maximum number of participants: 1 (individual performance / assignment by arrangement)
Recommended reading, lecture notes
Lecture notes
unavailable
Electronic lecture notes
available – Skript zu CFD in der Verfahrenstechnik wird bei LV Teilnahme auf Anfrage als pdf zur Verfügung gestellt
Recommended literature
- An Introduction to Computational Fluid Dynamics, VersteegH./Malalasekra,W./ Prentice Hall /2007
Assigned programs
This module version is used in the following programs:
| Program / program version | Semester(s) | Curriculum component |
|---|---|---|
| Energy Engineering and Process Engineering StuPO 2009 | SS 2025 | Rechnergestützte Methoden |
| WS 2025/26 | Rechnergestützte Methoden |
Master of Energy and Process Engineering
Part of the compulsory elective module list “Computer-aided methods” in the Energy and Process Engineering degree program
Energy and Process Engineering Diploma (discontinued)
Part of the compulsory elective module list “Computer-aided methods” in the Energy and Process Engineering degree program
Energy and Process Engineering Diploma (discontinued)
Miscellaneous
This course is a supplementary course offered by the department to the course “CFD in Process Engineering” 0331 L 015.
The target group is primarily those students who have to complete a (further) course of 2 LP
in order to achieve the required total number of points in the module and who are unable to attend due to
over-subscription and / or formal criteria (e.g. ERASMUS participants) are not offered a place in the regular
could not be offered a place in the regular course. This is intended to create an opportunity to complete the course within the planned timeframe
The target group is primarily those students who have to complete a (further) course of 2 LP
in order to achieve the required total number of points in the module and who are unable to attend due to
over-subscription and / or formal criteria (e.g. ERASMUS participants) are not offered a place in the regular
could not be offered a place in the regular course. This is intended to create an opportunity to complete the course within the planned timeframe