Skip to content
Technische Universität Berlin Deutsch
Course catalog and module transfer system

Project planning of environmental plantsModule description #30232 / Version 8

← Module page Deutsche Fassung
This module description is not valid in the current semester (Winter semester 2026/27). Current version (v10)
Module / Version#30232 / #8
ValidityWS 2019/20 – Summer semester 2025
Available language(s)German
Credit points6
Person responsible for the moduleGeißen, Sven-Uwe
GradingGraded
Exam formatPortfolio examination
Language(s) of instructionGerman

Affiliation

FacultyFakultät III
InstituteInstitut für Technischen Umweltschutz
Academic chair33331100 FG Umweltverfahrenstechnik

Contact

OfficeKF 2
Contact personStreckwall, Lina Marie
E-mail addresssven.geissen@tu-berlin.de
Websitehttp://www.uvt.tu-berlin.de

Learning outcomes

The students:
- can design and construct environmental engineering plants, such as waste water recycling plants, for a given task up to basic planning,
- are able to select the individual plant components (e.g. bioreactors, solid-liquid separators), dimension them, couple them optimally with each other and, for example, create a layout plan; they know the following steps up to the start-up of a plant,
- are able to perform the engineering tasks as well as the individual steps for the construction of simple plants,
- have in-depth scientific and technical knowledge necessary for the design and description of the basic operations.
- have the ability for professional group work and division of work.

The qualification objectives apply to all basic operations and to both liquid and gaseous media.

The course conveys:
40% knowledge and understanding, 20% development and design, 20% research and assessment, 20% application and practice

Content

- Project planning of a multi-stage environmental engineering plant using a current and concrete example (e.g. a waste water recycling plant)
- Sub-steps of the plant project planning: basic evaluation, start-up, maintenance, shutdown
- Execution of basic evaluation as well as parts of the Front End Engineering (FEED) and the Basic engineering
- Selection of basic operations, calculation, description and optimization of the overall process
- Presentation of software components used for project planning (Aspen, project management, etc.).

The number of plants to be planned is determined depnding on the number of participants.

Module components

Compulsory area

The following courses are mandatory for this module:

CoursesTypeNumberFrequencyLanguageHours per weekCourse catalog
Projektierung von umwelttechnischen AnlagenIntegrated course0333 L 157 Winter and summer semester–4 ISIS

Courses in the course catalog

Courses created from the teaching units of this module.

Winter semester 2026/27 (1)

Projektierung von umwelttechnischen Anlagen (Integrated course) 1

All groups of this course in the catalog

Workload and credit points

Projektierung von umwelttechnischen Anlagen (Integrated course)

Workload descriptionMultiplierHoursTotal
Präsenzzeit154 h60 h
Vor-/Nachbereitung155 h75 h
135 h

Course-independent workload

Workload descriptionMultiplierHoursTotal
Vorbereitung der Prüfungsleistungen153 h45 h
45 h

The workload of the module adds up to 180 hours. The module therefore comprises 6 credit points.

Description of teaching and learning methods

The module consists of an integrated course with a lecture, calculation and presentation part. The students are divided into groups for the execution of the calculations. The groups carry out partial tasks of a complex plant or an entire plant project planning as well as the presentation of the individual partial steps. The results of the group work are summarised in a report. This course prepares and deepens the content of various modules and clarifies their practical relevance.

Requirements for participation and examination

Desirable prerequisites for participation in the courses:

Introduction to plant and process engineering, environmental process engineering, waste water process engineering I

Mandatory requirements for the module examination registration:

This module has no examination requirements.

Completion of the module

GradingGraded
Exam formatPortfolio examination
Type of portfolio examination100 points in total
LanguageEnglish, German

Test elements

NamePoints/WeightCategoryDuration/Extent
Vortrag II15oral15 min
Vortrag I15oral15 min
Vortrag III15oral15 min
Mündliche Rücksprache20oral20 min
Bericht35written20 Seiten

Exam description

The portfolio examination consists of the following assessment-relevant academic achievements:

- Report (20 pages)
- Oral consultation (maximum 20 min duration)
- 3 presentations (15 min each)

Evaluation scheme: 50% pass mark, grade gradation in 5% steps, grade 1.0 from 95% onwards

Duration of the module

The following number of semesters is estimated for taking and completing the module: 1 semester(s).

This module can be started in the following semesters: Winter and summer semester.

Maximum number of participants

The maximum capacity of participants is 40.

Registration procedures

The registration of the portfolio examination is made at the Examination Office. The registration must be submitted up to one working day before the first assessment-relevant academic achievement, but not later than 30 November. For organisational reasons, registration or entry in participant lists on ISIS is required.

Recommended reading, lecture notes

Lecture notes

unavailable

Electronic lecture notes

available – www.isis.tu-berlin.de

Recommended literature

  • wird im Laufe der LV bekannt gegeben

Assigned programs

This module version is used in the following programs:

Program / program versionSemester(s)Curriculum component
Chemical Engineering
MSc_ChemIng_2020
WS 2020/21Wahlpflichtmodule › Umwelt- und Sicherheitstechnik
SS 2021Wahlpflichtmodule › Umwelt- und Sicherheitstechnik
WS 2021/22Wahlpflichtmodule › Umwelt- und Sicherheitstechnik
SS 2022Wahlpflichtmodule › Umwelt- und Sicherheitstechnik
WS 2022/23Wahlpflichtmodule › Umwelt- und Sicherheitstechnik
SS 2023Wahlpflichtmodule › Umwelt- und Sicherheitstechnik
WS 2023/24Wahlpflichtmodule › Umwelt- und Sicherheitstechnik
SS 2024Wahlpflichtmodule › Umwelt- und Sicherheitstechnik
WS 2024/25Wahlpflichtmodule › Umwelt- und Sicherheitstechnik
SS 2025Wahlpflichtmodule › Umwelt- und Sicherheitstechnik
Environmental Science and Technology
StuPO 2014
SS 2025Ergänzungsbereich
Master Environmental Engineering
Component of the supplementary module list (Environmental Technology)
Component of the main subject module "Environmental Process Technology" (Environmental Technology)
The assignment of this module as supplementary module and the simultaneous selection of the following module is not permissible due to overlaps:
Main subject module "Environmental Process Technology"

Miscellaneous

Not specified