Computer-Based Design of Polymer and Plastic ProductsModule description #30269 / Version 3
- 6 CP
- Oral exam
- Graded
- Winter and summer semester
- English, German
| Module / Version | #30269 / #3 |
|---|---|
| Validity | Since Summer semester 2025 |
| Available language(s) | German |
| Credit points | 6 |
| Person responsible for the module | Rohnstock, Falk |
| Grading | Graded |
| Exam format | Oral exam |
| Language(s) of instruction | English, German |
Affiliation
| Faculty | Fakultät III |
|---|---|
| Institute | Institut für Werkstoffwissenschaften und -technologien |
| Academic chair | 33341400 FG Polymerwerkstoffe und -technologien |
Contact
| Office | PTK |
|---|---|
| Contact person | Rohnstock, Falk |
| E-mail address | f.rohnstock@tu-berlin.de |
| Website | http://www.tu.berlin/ptk |
Learning outcomes
The students:
- possess scientific knowledge and knowledge of computer-aided development and design of plastic products. This enables them to make the right material selection when using plastics as a material and to adapt the product design accordingly to the plastics,
- have knowledge in the application of CAD systems,
- can analyze and solve specific and complex problems while considering environmental issues,
- have the skill to transfer the acquired knowledge to industrial practice, taking into account the specific characteristics of plastics, and have the ability for research, development, and innovation.
The course conveys:
20% knowledge & understanding, 40% development & design, 20% research & evaluation, 20% application & practice.
- possess scientific knowledge and knowledge of computer-aided development and design of plastic products. This enables them to make the right material selection when using plastics as a material and to adapt the product design accordingly to the plastics,
- have knowledge in the application of CAD systems,
- can analyze and solve specific and complex problems while considering environmental issues,
- have the skill to transfer the acquired knowledge to industrial practice, taking into account the specific characteristics of plastics, and have the ability for research, development, and innovation.
The course conveys:
20% knowledge & understanding, 40% development & design, 20% research & evaluation, 20% application & practice.
Content
Computer-Based Design of Polymer and Plastic Products
- Computer-aided design and development using CAD systems (SolidWorks)
- 2D and 3D CAD systems and exemplary design of various plastic components
- Designing and shaping with plastics, taking into account material selection, processing, recycling, and specific properties of plastics to achieve optimal product solutions
- Establishing product requirements
- Use of knowledge-based systems and expert systems for product development with plastics (material selection from databases)
- Computer-aided design and development using CAD systems (SolidWorks)
- 2D and 3D CAD systems and exemplary design of various plastic components
- Designing and shaping with plastics, taking into account material selection, processing, recycling, and specific properties of plastics to achieve optimal product solutions
- Establishing product requirements
- Use of knowledge-based systems and expert systems for product development with plastics (material selection from databases)
Module components
Compulsory area
The following courses are mandatory for this module:
| Courses | Type | Number | Frequency | Language | Hours per week | Course catalog |
|---|---|---|---|---|---|---|
| Rechnergestützte Entwicklung Konstruktion von Kunststoffprodukten | Lecture | 0334 L 430 | Winter and summer semester | – | 2 | WS 2026/27 (1) ISIS |
| Rechnergestützte Entwicklung Konstruktion von Kunststoffprodukten | Exercise | 0334 L 431 | Winter and summer semester | – | 2 | WS 2026/27 (1) ISIS |
Courses in the course catalog
Courses created from the teaching units of this module.
Winter semester 2026/27 (2)
Rechnergestützte Entwicklung Konstruktion von Kunststoffprodukten (Lecture) 1
- Rechnergestützte Entwicklung Konstruktion von Kunststoffprodukten (Vorlesung) 1. Termingruppe 0334 L 430
Rechnergestützte Entwicklung Konstruktion von Kunststoffprodukten (Exercise) 1
- Rechnergestützte Entwicklung Konstruktion von Kunststoffprodukten (Übung) 1. Termingruppe 0334 L 431
Workload and credit points
Rechnergestützte Entwicklung Konstruktion von Kunststoffprodukten (Lecture)
| Workload description | Multiplier | Hours | Total |
|---|---|---|---|
| Presence time | 15 | 2 h | 30 h |
| Preparation and follow-up | 15 | 1 h | 15 h |
| 45 h | |||
Rechnergestützte Entwicklung Konstruktion von Kunststoffprodukten (Exercise)
| Workload description | Multiplier | Hours | Total |
|---|---|---|---|
| Presence time | 15 | 2 h | 30 h |
| Preparation and follow-up | 15 | 3 h | 45 h |
| 75 h | |||
Course-independent workload
| Workload description | Multiplier | Hours | Total |
|---|---|---|---|
| Preparation of the exam | 1 | 60 h | 60 h |
| 60 h | |||
The workload of the module adds up to 180 hours. The module therefore comprises 6 credit points.
Description of teaching and learning methods
The module consists of lectures and practical exercises.
Requirements for participation and examination
Desirable prerequisites for participation in the courses:
Besuch der Module Konstruieren mit Kunststoffen I und II.
Mandatory requirements for the module examination registration:
This module has no examination requirements.
Completion of the module
| Grading | Graded |
|---|---|
| Exam format | Oral exam |
| Language | English, German |
| Duration/Extent | 1h |
Duration of the module
The following number of semesters is estimated for taking and completing the module: 1 semester(s).
This module can be started in the following semesters: Winter and summer semester.
Maximum number of participants
The maximum capacity of participants is 20.
Registration procedures
The registration for the examination takes place in the responsible PTK department and then in the examination office, if necessary via online examination registration.
Recommended reading, lecture notes
Lecture notes
unavailable
Electronic lecture notes
unavailable
Recommended literature
No recommended literature given
Assigned programs
This module version is used in the following programs:
| Program / program version | Semester(s) | Curriculum component |
|---|---|---|
| Material Science and Engineering StuPO 2009 | SS 2025 | Vertiefungsmodule |
| WS 2025/26 | Vertiefungsmodule | |
| SS 2026 | Vertiefungsmodule | |
| WS 2026/27 | Vertiefungsmodule | |
| Material Science and Engineering Material Science and Engineering (M. Sc.) - StuPO 2024 | SS 2025 | Fachzspezifische Wahlpflicht › Natur- und ingenieurwissenschaftliche Aspekte der Materialwissenschaft und Werkstofftechnik › FG Polymerwerkstoffe und Technologien |
| WS 2025/26 | Fachzspezifische Wahlpflicht › Natur- und ingenieurwissenschaftliche Aspekte der Materialwissenschaft und Werkstofftechnik › FG Polymerwerkstoffe und Technologien | |
| SS 2026 | Fachzspezifische Wahlpflicht › Natur- und ingenieurwissenschaftliche Aspekte der Materialwissenschaft und Werkstofftechnik › FG Polymerwerkstoffe und Technologien | |
| WS 2026/27 | Fachzspezifische Wahlpflicht › Natur- und ingenieurwissenschaftliche Aspekte der Materialwissenschaft und Werkstofftechnik › FG Polymerwerkstoffe und Technologien |
For bachelor and master degree programs in materials science, polymer science, mechanical engineering, chemical engineering, process engineering, technical environmental protection
Miscellaneous
Not specified