Energy, Momentum and Mass Transfer II A (9 CP)Module description #30379 / Version 10
- 9 CP
- Written exam
- Graded
- Summer semester
- German
This module description is not valid in the current semester (Winter semester 2026/27).
Current version (v11)
| Module / Version | #30379 / #10 |
|---|---|
| Validity | Summer semester 2025 – Winter semester 2025/26 |
| Available language(s) | English, German |
| Credit points | 9 |
| Person responsible for the module | Kraume, Matthias |
| Grading | Graded |
| Exam format | Written exam |
| Language(s) of instruction | German |
Affiliation
| Faculty | Fakultät III |
|---|---|
| Institute | Institut für Prozess und Verfahrenstechnik |
| Academic chair | 33351300 FG Verfahrenstechnik |
Contact
| Office | ACK 7 |
|---|---|
| Contact person | Böhm, Lutz |
| E-mail address | sekretariat@vt.tu-berlin.de |
| Website | https://www.tu.berlin/verfahrenstechnik |
Learning outcomes
The students should:
- have a basic understanding of all thermodynamic, process engineering or energy-related
energy-related heat and mass transfer processes, including fluid dynamics,
- understand heat and mass transfer processes and their significance in nature and technology,
estimate and calculate these processes and develop models for them,
- be able to deal in depth with problems of heat and mass transfer in flowing media
be qualified,
- be able to use the problem solutions known from the literature for known and analogous problems
and also be able to develop new solutions independently.
The course teaches:
80 % knowledge & understanding, 20 % analysis & methodology
- have a basic understanding of all thermodynamic, process engineering or energy-related
energy-related heat and mass transfer processes, including fluid dynamics,
- understand heat and mass transfer processes and their significance in nature and technology,
estimate and calculate these processes and develop models for them,
- be able to deal in depth with problems of heat and mass transfer in flowing media
be qualified,
- be able to use the problem solutions known from the literature for known and analogous problems
and also be able to develop new solutions independently.
The course teaches:
80 % knowledge & understanding, 20 % analysis & methodology
Content
- Fundamentals of transport processes in single-phase and multiphase flows
- momentum transport
- Fundamentals of fluid mechanics
- single-phase flows: Balance equations for mass, momentum and energy, incl. simplified
forms: boundary layer equations, Euler equation, Bernoulli equation
- Influence of turbulence, free convection
- Multiphase flows: Condensation, evaporation
- Applications to practical problems: flow over bodies, flow through pipes and systems
- momentum transport
- Fundamentals of fluid mechanics
- single-phase flows: Balance equations for mass, momentum and energy, incl. simplified
forms: boundary layer equations, Euler equation, Bernoulli equation
- Influence of turbulence, free convection
- Multiphase flows: Condensation, evaporation
- Applications to practical problems: flow over bodies, flow through pipes and systems
Module components
Compulsory area
The following courses are mandatory for this module:
| Courses | Type | Number | Frequency | Language | Hours per week | Course catalog |
|---|---|---|---|---|---|---|
| Energie-, Impuls- und Stofftransport II A (anwendungsbezogene Übungen) (EIS II A) | Integrated course | 0331 L 042 | Summer semester | [de] | 2 | ISIS |
| Energie-, Impuls- und Stofftransport II A | Tutorial | 0331 L 041 | Summer semester | [de] | 2 | ISIS |
| Energie-, Impuls- und Stofftransport II A (Grundlagen) | Integrated course | 0331 L 040 | Summer semester | [de] | 4 | ISIS |
Workload and credit points
Energie-, Impuls- und Stofftransport II A (anwendungsbezogene Übungen) (EIS II A) (Integrated course)
| Workload description | Multiplier | Hours | Total |
|---|---|---|---|
| Attendance time | 15 | 2 h | 30 h |
| Preparation and follow-up | 15 | 1 h | 15 h |
| 45 h | |||
Energie-, Impuls- und Stofftransport II A (Tutorial)
| Workload description | Multiplier | Hours | Total |
|---|---|---|---|
| Attendance time | 15 | 2 h | 30 h |
| 30 h | |||
Energie-, Impuls- und Stofftransport II A (Grundlagen) (Integrated course)
| Workload description | Multiplier | Hours | Total |
|---|---|---|---|
| Attendance time | 15 | 4 h | 60 h |
| Preparation and follow-up | 15 | 2 h | 30 h |
| 90 h | |||
Course-independent workload
| Workload description | Multiplier | Hours | Total |
|---|---|---|---|
| Exam preparation | 1 | 105 h | 105 h |
| 105 h | |||
The workload of the module adds up to 270 hours. The module therefore comprises 9 credit points.
Description of teaching and learning methods
Integrated course on fundamentals (course no. 0331 L 040): The theoretical basics are taught here. Integrated into the lecture are calculation examples and, in individual cases, short experiments for illustration.
Integrated course on application-related exercises (course no. 0331 L 042): The participants work on exercises with the exercise instructors, which are included in the lecture notes. The tasks are calculated in advance or solved independently under guidance.
Tutorial (Cat. 1): These are held in the form of small groups (max. 30 participants). The participants work on exercises that are included in the lecture notes and are published in good time for preparation. The tasks are solved independently in groups or individually under the guidance of a tutor. In addition, the basics are supplemented or deepened by lectures given by the tutors. The tutorial is offered in the summer semester with 5-6 appointments per week if required.
Integrated course on application-related exercises (course no. 0331 L 042): The participants work on exercises with the exercise instructors, which are included in the lecture notes. The tasks are calculated in advance or solved independently under guidance.
Tutorial (Cat. 1): These are held in the form of small groups (max. 30 participants). The participants work on exercises that are included in the lecture notes and are published in good time for preparation. The tasks are solved independently in groups or individually under the guidance of a tutor. In addition, the basics are supplemented or deepened by lectures given by the tutors. The tutorial is offered in the summer semester with 5-6 appointments per week if required.
Requirements for participation and examination
Desirable prerequisites for participation in the courses:
Useful: Physics, Analysis I and II, Thermodynamics I or Physical Chemistry, EIS I, DGL for Engineers
Mandatory requirements for the module examination registration:
This module has no examination requirements.
Completion of the module
| Grading | Graded |
|---|---|
| Exam format | Written exam |
| Language | French, German |
| Duration/Extent | approx. 180 minutes in total (calculation part 120 minutes and separate theory part approx. 45 minutes) |
Duration of the module
The following number of semesters is estimated for taking and completing the module: 1 semester(s).
This module can be started in the following semesters: Summer semester.
Maximum number of participants
This module is not limited to a number of students.
Registration procedures
Registration for the written examination takes place via the MTS
Recommended reading, lecture notes
Lecture notes
available
Electronic lecture notes
unavailable
Recommended literature
- Baehr/Stephan: Wärme- und Stoffübertragung, Springer Verlag, 6. Aufl. 2008
- Bird/Stewart/Lightfoot: Transport Phenomena, John Wiley & Sons, 2nd Ed., 2002
- Marek/ Nitsche: Praxis der Wäremeübertragung , Hanser 3. Auflage 2012
Assigned programs
This module version is used in the following programs:
| Program / program version | Semester(s) | Curriculum component |
|---|---|---|
| Energy Engineering and Process Engineering StuPO 2014 | SS 2025 | Spezifische Module |
| WS 2025/26 | Spezifische Module | |
| Erneuerbare Energien und Verfahrenstechnik StuPO 2025 | WS 2025/26 | Pflichtbereich › Fachspezifische Grundlagen |
| Industrial Engineering and Management Industrial Engineering and Management (B. Sc.) - StuPO 2015 | SS 2025 | Ingenieurwissenschaftliche Studienrichtungen › Chemie und Verfahrenstechnik (CVT) › Chemie und Verfahrenstechnik (Wahlpflicht) |
| WS 2025/26 | Ingenieurwissenschaftliche Studienrichtungen › Chemie und Verfahrenstechnik (CVT) › Chemie und Verfahrenstechnik (Wahlpflicht) | |
| Natural Sciences in the Information Society StuPO 2018 | SS 2025 | Wahlpflichtbereich › Technik |
| WS 2025/26 | Wahlpflichtbereich › Technik | |
| Natural Sciences in the Information Society Natural Sciences in the Information Society (B. Sc.) - StuPO 2025 | WS 2025/26 | Wahlpflichtbereich › Wahlpflichtbereich Technik |
Module EIS II A
for students of the Bachelor EPT
for students of the Bachelor EPT
Miscellaneous
“EIS IIA” is the continuation of the ‘EIS IA’ event.