Advanced Synthesis and Processing of Ceramic MaterialsModule description #30418 / Version 3
- 6 CP
- Portfolio examination
- Graded
- Summer semester
- English
This module description is not valid in the current semester (Winter semester 2026/27).
| Module / Version | #30418 / #3 |
|---|---|
| Validity | SS 2016 – SS 2016 |
| Available language(s) | English |
| Credit points | 6 |
| Person responsible for the module | Gurlo, Aleksander |
| Grading | Graded |
| Exam format | Portfolio examination |
| Language(s) of instruction | English |
Affiliation
| Faculty | Fakultät III |
|---|---|
| Institute | Institut für Werkstoffwissenschaften und -technologien |
| Academic chair | 33341300 FG Keramische Werkstoffe |
Contact
| Office | BA 3 |
|---|---|
| Contact person | Amtsfeld, Anne-Claude |
| E-mail address | gurlo@ceramics.tu-berlin.de |
| Website | http://www.keramik.tu-berlin.de |
Learning outcomes
The students
• understand and explain the basics of synthesis and processing technqiues of ceramic materials
• know, understanding, explain and present the advanced synthesis and processing techniques of ceramic and nanosized materials
• understand and explain the basics of synthesis and processing technqiues of ceramic materials
• know, understanding, explain and present the advanced synthesis and processing techniques of ceramic and nanosized materials
Content
Moderne Synthesemethoden keramischer Werkstoffe / Advanced Synthesis of Ceramic Materials (IV):
Advanced synthesis methods of ceramics materials will be covered, that include the methods based on
(i) solid state reactions: solid/solid, i.e. ceramic synthesis, (ii) solids out of melts and solutions: liquid/solid, i.e. single-crystal growth from melts, crystallization from solutions and gels, precipitation reactions, sol-gel processes, solvothermal synthesis, spray pyrolysis and flame spray pyrolysis, synthesis from polynuclear polymeric precursors, (iii) solids from gas phase (or plasma): gas/solid, i.e. PLD (Pulsed Laser Deposition), CVD (Chemical Vapour Deposition), chemical transport reactions, (iv) substitution of anions in subsequent treatment: gas/solid (i.e. nitration and ammonolysis) and (v) high-pressure synthesis.
Moderne Sintertechnologien und additive Verfahren / Advanced Sintering and Additive Manufacturing Techniques (IV):
Advanced shaping and sintering methods of ceramic materials will be covered, including additive manufacturing techniques, 3D-printing and field-assisted methods (e.g. Spark Plasma Sintering).
Advanced synthesis methods of ceramics materials will be covered, that include the methods based on
(i) solid state reactions: solid/solid, i.e. ceramic synthesis, (ii) solids out of melts and solutions: liquid/solid, i.e. single-crystal growth from melts, crystallization from solutions and gels, precipitation reactions, sol-gel processes, solvothermal synthesis, spray pyrolysis and flame spray pyrolysis, synthesis from polynuclear polymeric precursors, (iii) solids from gas phase (or plasma): gas/solid, i.e. PLD (Pulsed Laser Deposition), CVD (Chemical Vapour Deposition), chemical transport reactions, (iv) substitution of anions in subsequent treatment: gas/solid (i.e. nitration and ammonolysis) and (v) high-pressure synthesis.
Moderne Sintertechnologien und additive Verfahren / Advanced Sintering and Additive Manufacturing Techniques (IV):
Advanced shaping and sintering methods of ceramic materials will be covered, including additive manufacturing techniques, 3D-printing and field-assisted methods (e.g. Spark Plasma Sintering).
Module components
Compulsory area
The following courses are mandatory for this module:
Workload and credit points
Advanced Synthesis of Ceramic Materials (Integrated course)
| Workload description | Multiplier | Hours | Total |
|---|---|---|---|
| E-Learning | 15 | 1 h | 15 h |
| Präsenzzeit | 15 | 2 h | 30 h |
| Prüfungsvorbereitung | 1 | 15 h | 15 h |
| Vor-/Nachbereitung | 15 | 2 h | 30 h |
| 90 h | |||
Sintering and Additive Manufacturing (Integrated course)
| Workload description | Multiplier | Hours | Total |
|---|---|---|---|
| E-Learning | 15 | 1 h | 15 h |
| Präsenzzeit | 15 | 2 h | 30 h |
| Prüfungsvorbereitung | 1 | 15 h | 15 h |
| Vor-/Nachbereitung | 15 | 2 h | 30 h |
| 90 h | |||
The workload of the module adds up to 180 hours. The module therefore comprises 6 credit points.
Description of teaching and learning methods
Das Modul besteht aus integrierten Veranstaltungen.
Requirements for participation and examination
Desirable prerequisites for participation in the courses:
This module has no desirable prerequisites for the courses.
Mandatory requirements for the module examination registration:
This module has no examination requirements.
Completion of the module
| Grading | Graded |
|---|---|
| Exam format | Portfolio examination |
| Language | English |
Test elements
| Name | Points/Weight | Category | Duration/Extent |
|---|---|---|---|
| Mündliche Rücksprache | 50 | ||
| Referat | 50 |
Duration of the module
The following number of semesters is estimated for taking and completing the module: 1 semester(s).
This module can be started in the following semesters: Summer semester.
Maximum number of participants
This module is not limited to a number of students.
Registration procedures
Die Anmeldung der Prüfungsäquivalenten Studienleistungen erfolgt im Prüfungsamt. Die Anmeldung muss bis einen Werktag vor Erbringen der ersten Teilleistung erfolgen.
Recommended reading, lecture notes
Lecture notes
unavailable
Electronic lecture notes
available – auf ISIS, veranstaltungsspezifisch
Recommended literature
- Carter, C. Barry, Norton, M. Grant, Ceramic Materials - Science and Engineering, Springer, 2013
- Ceramics Science and Technology, Wiley, 2013, Vol. 3 and 4
Assigned programs
This module is not used in any program.
Wahlpflicht
Masterstudiengang "Werkstoffwissenschaften"
Profilbildung A1, B5, B6.3
Masterstudiengang "Werkstoffwissenschaften"
Profilbildung A1, B5, B6.3
Miscellaneous
Wahlpflicht
Masterstudiengang "Werkstoffwissenschaften"
Profilbildung A1, A2, B5, B6.3
Masterstudiengang "Werkstoffwissenschaften"
Profilbildung A1, A2, B5, B6.3