Computer-Aided Process DesignModule description #30492 / Version 10
- 6 CP
- Portfolio examination
- Graded
- Winter and summer semester
- German
| Module / Version | #30492 / #10 |
|---|---|
| Validity | Since Summer semester 2026 |
| Available language(s) | English, German |
| Credit points | 6 |
| Person responsible for the module | Repke, Jens-Uwe |
| Grading | Graded |
| Exam format | Portfolio examination |
| Language(s) of instruction | German |
Affiliation
| Faculty | Fakultät III |
|---|---|
| Institute | Institut für Prozess und Verfahrenstechnik |
| Academic chair | 33351500 FG Dynamik und Betrieb technischer Anlagen |
Contact
| Office | KWT 9 |
|---|---|
| Contact person | Eichler, Philipp Julian |
| E-mail address | lehre@dbta.tu-berlin.de |
| Website | https://www.tu.berlin/dbta/studium-lehre/lehrveranstaltungen-i/computergestuetzte-anlagenplanung |
Learning outcomes
The students:
- know how to use tools and methods from computer aided plant design
- are able to create 2D engineering documents and plant models in 3D
- have an overview about conventional cost estimation techniques in process planning
- are motivated to extend the conventional computer aided plant design by their own ideas and new analysis
- are able to work interdisciplinary and responsible
- can work independently and scientificly
- are capable of team work and problem solving expertise
- know how to use tools and methods from computer aided plant design
- are able to create 2D engineering documents and plant models in 3D
- have an overview about conventional cost estimation techniques in process planning
- are motivated to extend the conventional computer aided plant design by their own ideas and new analysis
- are able to work interdisciplinary and responsible
- can work independently and scientificly
- are capable of team work and problem solving expertise
Content
Excercising a compete planning process of an industrial example in team work up to 3 students:
- Introduction to plant design, definitions, examples
- Fundamentals of process simulation and its central role in basic engineering
- Introduction to the Flowsheet Simulator Aspen and adaption for the sample process
- Principles of cost estimation in chemical engineering and calculations for the sample process
- Introduction and generation of Engineering Documents (BFD, PFD, P&ID) based on DIN 28004 with AutoCAD
- Introduction to the basics of detail engineering
- Design and instrumentation of process units
- Introduction and generation of plot plans (Master Plot Plan, Equipment Plot Plan, Equipment Elevation Plan)
- Fundamentals of piping design and isometrics
- 3D modelling of the sample process in FUsion including piping design
Commercial Software as Aspen, AutoCAD and Fusion are provided in the course.
- Introduction to plant design, definitions, examples
- Fundamentals of process simulation and its central role in basic engineering
- Introduction to the Flowsheet Simulator Aspen and adaption for the sample process
- Principles of cost estimation in chemical engineering and calculations for the sample process
- Introduction and generation of Engineering Documents (BFD, PFD, P&ID) based on DIN 28004 with AutoCAD
- Introduction to the basics of detail engineering
- Design and instrumentation of process units
- Introduction and generation of plot plans (Master Plot Plan, Equipment Plot Plan, Equipment Elevation Plan)
- Fundamentals of piping design and isometrics
- 3D modelling of the sample process in FUsion including piping design
Commercial Software as Aspen, AutoCAD and Fusion are provided in the course.
Module components
Compulsory area
The following courses are mandatory for this module:
| Courses | Type | Number | Frequency | Language | Hours per week | Course catalog |
|---|---|---|---|---|---|---|
| Computergestützte Anlagenplanung (CAP) | Integrated course | 0339 L 419 | Winter and summer semester | [de] | 4 | WS 2026/27 (1) ISIS |
Courses in the course catalog
Courses created from the teaching units of this module.
Winter semester 2026/27 (1)
Computergestützte Anlagenplanung (CAP) (Integrated course) 1
- Computergestützte Anlagenplanung (CAP) (Integrierte Veranstaltung) 1. Termingruppe 0339 L 419
Workload and credit points
Computergestützte Anlagenplanung (CAP) (Integrated course)
| Workload description | Multiplier | Hours | Total |
|---|---|---|---|
| Attendance | 10 | 8 h | 80 h |
| Preparation, report | 1 | 60 h | 60 h |
| Pre- and post-processing | 1 | 40 h | 40 h |
| 180 h | |||
The workload of the module adds up to 180 hours. The module therefore comprises 6 credit points.
Description of teaching and learning methods
In this course the complete planning process for an industrial plant is introduced to students through lectutures and practical parts using standard industry software. Parts of process simulation, functional planning, cost estimation, elevation drafts and piping design will be taught. In groups up to 3 persons the students have to deal with problems as they typically occur in process engineering.
Attention: The course is held in German.
Attention: The course is held in German.
Requirements for participation and examination
Desirable prerequisites for participation in the courses:
Attended lectures:
- Process and Plant Dynamics or Process Modeling, respectively
- Thermodynamics I+II
- Thermal Process Engineering
- Process Simulation
- Process and Plant Dynamics or Process Modeling, respectively
- Thermodynamics I+II
- Thermal Process Engineering
- Process Simulation
Mandatory requirements for the module examination registration:
This module has no examination requirements.
Completion of the module
| Grading | Graded |
|---|---|
| Exam format | Portfolio examination |
| Type of portfolio examination | 100 points per element |
| Language | German |
Test elements
| Name | Points/Weight | Category | Duration/Extent |
|---|---|---|---|
| Report | 7 | written | 50-70 pages |
| Discussion | 3 | oral | 15 minutes per person |
Exam description
As part of the module, a plant design project will be completed. A report will be submitted and graded.
This will be followed by an oral consultation based on the report (approx. 1 hour, depending on the size of the group, 15 minutes per group member).
The overall grade will be based on the written grade for the report (70%) and the oral discussion (30%).
Report and oral consultation is performed by the same team of students.
The report must be submitted at least two weeks before the oral consultation.
For organizational reasons, the date for the oral consultation should be agreed at least four weeks in advance. Please contact the supervising teaching staff for this purpose.
This will be followed by an oral consultation based on the report (approx. 1 hour, depending on the size of the group, 15 minutes per group member).
The overall grade will be based on the written grade for the report (70%) and the oral discussion (30%).
Report and oral consultation is performed by the same team of students.
The report must be submitted at least two weeks before the oral consultation.
For organizational reasons, the date for the oral consultation should be agreed at least four weeks in advance. Please contact the supervising teaching staff for this purpose.
Duration of the module
The following number of semesters is estimated for taking and completing the module: 1 semester(s).
This module can be started in the following semesters: Winter and summer semester.
Maximum number of participants
The maximum capacity of participants is 24.
Registration procedures
The registration as "prüfungsäquivalente Studienleistung" is either done at the Prüfungsamt via "Gelber Zettel" or via QISPOS. The registration has to be done no later than one working day before the report is handed in.
Since the number of participants is restricted, a participation is only possible if there are suifficient capacities. You need to register beforehand on https://www.tu.berlin/dbta/studium-lehre/lehrveranstaltungen-i/computergestuetzte-anlagenplanung/
Since the number of participants is restricted, a participation is only possible if there are suifficient capacities. You need to register beforehand on https://www.tu.berlin/dbta/studium-lehre/lehrveranstaltungen-i/computergestuetzte-anlagenplanung/
Recommended reading, lecture notes
Lecture notes
unavailable
Electronic lecture notes
available – https://www.isis.tu-berlin.de
Recommended literature
No recommended literature given
Assigned programs
This module version is used in the following programs:
| Program / program version | Semester(s) | Curriculum component |
|---|---|---|
| Chemical Engineering MSc_ChemIng_2020 | SS 2026 | Wahlpflichtmodule › Prozesstechnik |
| WS 2026/27 | Wahlpflichtmodule › Prozesstechnik | |
| Chemical Engineering Chemical Engineering (M. Sc.) - MSc_ChemIng_2026 | WS 2026/27 | Wahlpflichtbereich › Prozesstechnik |
| Energy Engineering and Process Engineering StuPO 2009 | SS 2026 | Rechnergestützte Methoden |
| WS 2026/27 | Rechnergestützte Methoden | |
| Process Energy and Environmental Systems Engineering Process Energy and Environmental Systems Engineering (M. Sc.) - StuPO 2016 | SS 2026 | Wahlpflichtmodule › Wahlpflichtliste 2 - Prozesssimulation und -führung |
| Process Energy and Environmental Systems Engineering StuPO 2022 | SS 2026 | Wahlpflichtmodule › Process Systems Engineering |
| WS 2026/27 | Wahlpflichtmodule › Process Systems Engineering | |
| Sustainable Energy and Process Engineering StuPO 2024 | SS 2026 | Wahlpflichtmodule › Fachspezifische Wahlpflicht SEPE › Computational Methods |
| WS 2026/27 | Wahlpflichtmodule › Fachspezifische Wahlpflicht SEPE › Computational Methods |
Miscellaneous
Not specified