MIMO Control in Time Domain (6 LP)Module description #30511 / Version 5
- 6 CP
- Oral exam
- Graded
- Summer semester
- German
| Module / Version | #30511 / #5 |
|---|---|
| Validity | Since Summer semester 2023 |
| Available language(s) | German |
| Credit points | 6 |
| Person responsible for the module | Knorn, Steffi |
| Grading | Graded |
| Exam format | Oral exam |
| Language(s) of instruction | German |
Affiliation
| Faculty | Fakultät III |
|---|---|
| Institute | Institut für Prozess und Verfahrenstechnik |
| Academic chair | 33351600 FG Regelungstechnik |
Contact
| Office | ER 2-1 |
|---|---|
| Contact person | Knorn, Steffi |
| E-mail address | Knorn@tu-berlin.de |
| Website | http://tu.berlin/ctrl |
Learning outcomes
The students:
- can solve control tasks that place greater and more extensive demands on the controller than standard control (covered in basics of control engineering),
- have in-depth knowledge of the analysis and design of multivariable control in the time domain,
- can set up model-based measurement methods,
- master optimal control and model predictive control,
- can work scientifically independently and deal with complexity, and
- are able to set up control loops with several degrees of freedom.
The event conveys:
20% knowledge and understanding, 20% analysis and methodology, 20% development and design, 20% research and evaluation, 20% application and practice
- can solve control tasks that place greater and more extensive demands on the controller than standard control (covered in basics of control engineering),
- have in-depth knowledge of the analysis and design of multivariable control in the time domain,
- can set up model-based measurement methods,
- master optimal control and model predictive control,
- can work scientifically independently and deal with complexity, and
- are able to set up control loops with several degrees of freedom.
The event conveys:
20% knowledge and understanding, 20% analysis and methodology, 20% development and design, 20% research and evaluation, 20% application and practice
Content
In the time domain:
- examples of state space models;
- Reference to the representations in the Laplace domain;
- MIMO systems in the Laplace domain;
- Characterization of linear systems (stability, observability, controllability);
- Synthesis of linear control loops in the MIMO case (pole placement, eigenstructure assignement, optical control, model predictive control, etc.);
- state observer;
- Kalman filter;
- Introduction to stochastics
- examples of state space models;
- Reference to the representations in the Laplace domain;
- MIMO systems in the Laplace domain;
- Characterization of linear systems (stability, observability, controllability);
- Synthesis of linear control loops in the MIMO case (pole placement, eigenstructure assignement, optical control, model predictive control, etc.);
- state observer;
- Kalman filter;
- Introduction to stochastics
Module components
Compulsory area
The following courses are mandatory for this module:
Workload and credit points
Analytische Übung zu Mehrgrößenregelung im Zeitbereich (Exercise)
| Workload description | Multiplier | Hours | Total |
|---|---|---|---|
| tutorials | 15 | 2 h | 30 h |
| preparation and post processing | 15 | 2 h | 30 h |
| 60 h | |||
Mehrgrößenregelung im Zeitbereich (Lecture)
| Workload description | Multiplier | Hours | Total |
|---|---|---|---|
| lectures | 15 | 4 h | 60 h |
| preparation and post processing | 15 | 2 h | 30 h |
| 90 h | |||
Course-independent workload
| Workload description | Multiplier | Hours | Total |
|---|---|---|---|
| exam preparation | 1 | 30 h | 30 h |
| 30 h | |||
The workload of the module adds up to 180 hours. The module therefore comprises 6 credit points.
Description of teaching and learning methods
Lectures and analytical exercises are used. In the analytical exercises/tutorials, the tasks are solved with pen and paper with the support of the teacher.
Requirements for participation and examination
Desirable prerequisites for participation in the courses:
a) obligatory: "Grundlagen der Mess- und Regelungstechnik" (Fundamentals of measurement and control technology) or a similar module
b) Desirable: Knowledge of MATLAB/SIMULINK e.g. from "Rechnergestützte Übungen zu RT I " (Computer-aided exercises on RT I)
b) Desirable: Knowledge of MATLAB/SIMULINK e.g. from "Rechnergestützte Übungen zu RT I " (Computer-aided exercises on RT I)
Mandatory requirements for the module examination registration:
This module has no examination requirements.
Completion of the module
| Grading | Graded |
|---|---|
| Exam format | Oral exam |
| Language | English, German |
Exam description
Prüfungsäquivalente Studienleistung für das Modul mit 6 LP (V+Ü): 30% schriftlicher Übungsschein zu den Analytischen Übungen, 70% mündliche Aussprache.
Duration of the module
The following number of semesters is estimated for taking and completing the module: 1 semester(s).
This module can be started in the following semesters: Summer semester.
Maximum number of participants
This module is not limited to a number of students.
Registration procedures
The registration for the oral exam is handled by the examination office, if necessary via the online examination registration.
No registration is required for the lectures.
No registration is required for the lectures.
Recommended reading, lecture notes
Lecture notes
unavailable
Electronic lecture notes
available – ISIS Portal
Recommended literature
No recommended literature given
Assigned programs
This module version is used in the following programs:
| Program / program version | Semester(s) | Curriculum component |
|---|---|---|
| Aeronautics and Astronautics StuPO 2018 | SS 2025 | 1. Ingenieurwissenschaftliche Methoden › 1.4 Regelungstechnik, Elektronik und Software-Engineering |
| WS 2025/26 | 1. Ingenieurwissenschaftliche Methoden › 1.4 Regelungstechnik, Elektronik und Software-Engineering | |
| SS 2026 | 1. Ingenieurwissenschaftliche Methoden › 1.4 Regelungstechnik, Elektronik und Software-Engineering | |
| WS 2026/27 | 1. Ingenieurwissenschaftliche Methoden › 1.4 Regelungstechnik, Elektronik und Software-Engineering | |
| Building Energy Engineering Building Energy Engineering (M. Sc.) - StuPO 2024 | SS 2025 | Vertiefung Energietechnik |
| WS 2025/26 | Vertiefung Energietechnik | |
| SS 2026 | Vertiefung Energietechnik | |
| WS 2026/27 | Vertiefung Energietechnik | |
| Computational Engineering Science (Informationstechnik im Maschinenwesen) StuPO 2018 (17.01.2018) | SS 2025 | 3. Kernbereich: Messen, Steuern, Regeln |
| WS 2025/26 | 3. Kernbereich: Messen, Steuern, Regeln | |
| SS 2026 | 3. Kernbereich: Messen, Steuern, Regeln | |
| WS 2026/27 | 3. Kernbereich: Messen, Steuern, Regeln | |
| Energy Engineering and Process Engineering StuPO 2009 | SS 2025 | Vertiefung Energie- und Verfahrenstechnik |
| WS 2025/26 | Vertiefung Energie- und Verfahrenstechnik | |
| SS 2026 | Vertiefung Energie- und Verfahrenstechnik | |
| WS 2026/27 | Vertiefung Energie- und Verfahrenstechnik | |
| Engineering Science StuPO 2007 (19.12.2007) | SS 2025 | 2.3 Mechatronik › 2.3b Ergänzungsbereich |
| WS 2025/26 | 2.3 Mechatronik › 2.3b Ergänzungsbereich | |
| SS 2026 | 2.3 Mechatronik › 2.3b Ergänzungsbereich | |
| Engineering Science StuPO 2020 | SS 2025 | 2.3 Mechatronik › 2.3b Ergänzungsbereich |
| WS 2025/26 | 2.3 Mechatronik › 2.3b Ergänzungsbereich | |
| SS 2026 | 2.3 Mechatronik › 2.3b Ergänzungsbereich | |
| WS 2026/27 | 2.3 Mechatronik › 2.3a Kernbereich | |
| Mechanical Engineering StuPO 2017 | WS 2023/24 | Wahlpflichtmodule › Profilmodule › Mess- und Automatisierungstechnik |
| SS 2024 | Wahlpflichtmodule › Profilmodule › Mess- und Automatisierungstechnik | |
| WS 2024/25 | Wahlpflichtmodule › Profilmodule › Mess- und Automatisierungstechnik | |
| SS 2025 | Wahlpflichtmodule › Profilmodule › Mess- und Automatisierungstechnik | |
| WS 2025/26 | Wahlpflichtmodule › Profilmodule › Mess- und Automatisierungstechnik | |
| SS 2026 | Wahlpflichtmodule › Profilmodule › Mess- und Automatisierungstechnik | |
| WS 2026/27 | Wahlpflichtmodule › Profilmodule › Mess- und Automatisierungstechnik | |
| Regenerative Energy Systems StuPO 2009 | SS 2025 | Vertiefung Energie- und Verfahrenstechnik |
| WS 2025/26 | Vertiefung Energie- und Verfahrenstechnik | |
| SS 2026 | Vertiefung Energie- und Verfahrenstechnik | |
| WS 2026/27 | Vertiefung Energie- und Verfahrenstechnik | |
| Regenerative Energy Systems StuPO 2023 | SS 2025 | Wahlpflichtmodule › Fachspezifische Wahlpflicht RES › Technik |
| WS 2025/26 | Wahlpflichtmodule › Fachspezifische Wahlpflicht RES › Technik | |
| SS 2026 | Wahlpflichtmodule › Fachspezifische Wahlpflicht RES › Technik | |
| WS 2026/27 | Wahlpflichtmodule › Fachspezifische Wahlpflicht RES › Technik | |
| Sustainable Energy and Process Engineering StuPO 2024 | SS 2025 | Wahlpflichtmodule › Fachspezifische Wahlpflicht SEPE › Advanced Sustainable Processes |
| WS 2025/26 | Wahlpflichtmodule › Fachspezifische Wahlpflicht SEPE › Advanced Sustainable Processes | |
| SS 2026 | Wahlpflichtmodule › Fachspezifische Wahlpflicht SEPE › Advanced Sustainable Processes | |
| WS 2026/27 | Wahlpflichtmodule › Fachspezifische Wahlpflicht SEPE › Advanced Sustainable Processes | |
| Technomathematics Technomathematics (M. Sc.) - StuPO 2014 | SS 2025 | Studienrichtungen › Physikalische Ingenieurwissenschaft › Physikalische Ingenieurwissenschaft › Mechatronik |
| WS 2025/26 | Studienrichtungen › Physikalische Ingenieurwissenschaft › Physikalische Ingenieurwissenschaft › Mechatronik | |
| SS 2026 | Studienrichtungen › Physikalische Ingenieurwissenschaft › Physikalische Ingenieurwissenschaft › Mechatronik | |
| WS 2026/27 | Studienrichtungen › Physikalische Ingenieurwissenschaft › Physikalische Ingenieurwissenschaft › Mechatronik |
Masterstudiengänge Physikalische Ingenieurwissenschaft, Informationstechnik im Maschinenwesen und Maschinenbau
Miscellaneous
Not specified