Process OperationModule description #30520 / Version 8
- 6 CP
- Oral exam
- Graded
- Summer semester
- German
| Module / Version | #30520 / #8 |
|---|---|
| Validity | Since Winter semester 2025/26 |
| Available language(s) | English, German |
| Credit points | 6 |
| Person responsible for the module | Repke, Jens-Uwe |
| Grading | Graded |
| Exam format | Oral exam |
| Language(s) of instruction | German |
Affiliation
| Faculty | Fakultät III |
|---|---|
| Institute | Institut für Prozess und Verfahrenstechnik |
| Academic chair | 33351500 FG Dynamik und Betrieb technischer Anlagen |
Contact
| Office | KWT 9 |
|---|---|
| Contact person | Illner, Markus Harald |
| E-mail address | lehre@dbta.tu-berlin.de |
| Website | https://www.tu.berlin/dbta/studium-lehre/lehrveranstaltungen-ii/prozessfuehrung |
Learning outcomes
The students
- have knowledge of process control in order to be able to systematically evaluate the (dynamic) operating behavior of processes
- develop strategies for safe and efficient start-up, shut-down and operation while maintaining the required product quality at low cost,
- are able to create and parameterize control structures for processes and entire plants, taking functional safety into account,
- have knowledge of the implementation of process automation, in particular the interaction of sensors and actuators, control loops, process automation and higher automation (APC),
- are familiar with communication architectures and interfaces and are prepared for interdisciplinary activities in the field of information technology,
- have knowledge of the structure of process visualizations,
- can classify measurement methods and higher PAT,
- have basic knowledge of model-based optimizing control.
The course teaches:
20% knowledge and understanding, 20% analysis and methodology, 20% development and design,
20% research and evaluation, 20% application and practice
- have knowledge of process control in order to be able to systematically evaluate the (dynamic) operating behavior of processes
- develop strategies for safe and efficient start-up, shut-down and operation while maintaining the required product quality at low cost,
- are able to create and parameterize control structures for processes and entire plants, taking functional safety into account,
- have knowledge of the implementation of process automation, in particular the interaction of sensors and actuators, control loops, process automation and higher automation (APC),
- are familiar with communication architectures and interfaces and are prepared for interdisciplinary activities in the field of information technology,
- have knowledge of the structure of process visualizations,
- can classify measurement methods and higher PAT,
- have basic knowledge of model-based optimizing control.
The course teaches:
20% knowledge and understanding, 20% analysis and methodology, 20% development and design,
20% research and evaluation, 20% application and practice
Content
The continuous monitoring and target-oriented control of process engineering processes is essential for safe and economically optimized operation. The course Process Control deals with this:
- Methods for the analysis of (dynamic) process behavior,
- Methods for analyzing the operability of individual devices and complete production processes (RGA, SVA, RDG, BRGA),
- Concepts for setting up control systems based on classic controller structures,
- Advanced Process Control (APC) and optimizing processes are presented and implemented using computer-aided case studies,
- Communication architectures and interfaces of industrially established process control technology and the structure of process visualizations are covered (human-machine interaction)
- Established process measurement technology, current challenges and new developments (higher PAT, soft sensing) are presented
The course is offered as an integrated course and combines lectures with independently completed computer exercises.
- Methods for the analysis of (dynamic) process behavior,
- Methods for analyzing the operability of individual devices and complete production processes (RGA, SVA, RDG, BRGA),
- Concepts for setting up control systems based on classic controller structures,
- Advanced Process Control (APC) and optimizing processes are presented and implemented using computer-aided case studies,
- Communication architectures and interfaces of industrially established process control technology and the structure of process visualizations are covered (human-machine interaction)
- Established process measurement technology, current challenges and new developments (higher PAT, soft sensing) are presented
The course is offered as an integrated course and combines lectures with independently completed computer exercises.
Module components
Compulsory area
The following courses are mandatory for this module:
| Courses | Type | Number | Frequency | Language | Hours per week | Course catalog |
|---|---|---|---|---|---|---|
| Prozessführung | Integrated course | 0339 L 410 | Winter and summer semester | [de] | 4 | ISIS |
Workload and credit points
Prozessführung (Integrated course)
| Workload description | Multiplier | Hours | Total |
|---|---|---|---|
| Attendance | 15 | 4 h | 60 h |
| Project work | 1 | 30 h | 30 h |
| Exam preparation | 1 | 60 h | 60 h |
| Pre- / Postprocessing | 15 | 2 h | 30 h |
| 180 h | |||
The workload of the module adds up to 180 hours. The module therefore comprises 6 credit points.
Description of teaching and learning methods
This is an integrated course, lectures, analytical exercises and computer exercises are used, whereby computer tools are explicitly used in the exercises. Semester tasks are supplemented by theoretical work and review of technical literature. These are carried out independently in small groups, accompanied by consultation hours offered by the lecturers.
Requirements for participation and examination
Desirable prerequisites for participation in the courses:
Knowledge of process modeling and control engineering is advantageous, as is knowledge of Matlab and Simulink
Mandatory requirements for the module examination registration:
This module has no examination requirements.
Completion of the module
| Grading | Graded |
|---|---|
| Exam format | Oral exam |
| Language | English, German |
| Duration/Extent | 45 minutes |
Duration of the module
The following number of semesters is estimated for taking and completing the module: 1 semester(s).
This module can be started in the following semesters: Summer semester.
Maximum number of participants
The maximum capacity of participants is 20.
Registration procedures
Exam registration via MTS.
Recommended reading, lecture notes
Lecture notes
unavailable
Electronic lecture notes
available – https://www.isis.tu-berlin.de/
Recommended literature
- Luybern, M.L. „Essentials of Process Control", McGrawhill Companies, Inc. 1997
- Luybern, W.L. „Process Modeling, Simulation and Control for Chemical Engineers“ McGraw-Hill, Inc. New York 1990, 0070391599
- Schuler, H. (Hrsg.) „Prozessführung“,R. Oldenbourg Verlag München Wien 1999, 3486234773
- Seborg "Process Dynamics & Control", Wiley 2011, ISBN 978-0-4 70-12867-1
Assigned programs
This module version is used in the following programs:
| Program / program version | Semester(s) | Curriculum component |
|---|---|---|
| Building Energy Engineering Building Energy Engineering (M. Sc.) - StuPO 2024 | WS 2025/26 | Vertiefung Energietechnik |
| SS 2026 | Vertiefung Energietechnik | |
| WS 2026/27 | Vertiefung Energietechnik | |
| Computational Engineering Science (Informationstechnik im Maschinenwesen) StuPO 2018 (17.01.2018) | WS 2025/26 | 4. Profilbereich › 4.1 Profilbereich: Prozess- und Systemtechnik |
| SS 2026 | 4. Profilbereich › 4.1 Profilbereich: Prozess- und Systemtechnik | |
| WS 2026/27 | 4. Profilbereich › 4.1 Profilbereich: Prozess- und Systemtechnik | |
| Process Energy and Environmental Systems Engineering Process Energy and Environmental Systems Engineering (M. Sc.) - StuPO 2016 | WS 2025/26 | Wahlpflichtmodule › Wahlpflichtliste 2 - Prozesssimulation und -führung |
| SS 2026 | Wahlpflichtmodule › Wahlpflichtliste 2 - Prozesssimulation und -führung | |
| Regenerative Energy Systems StuPO 2009 | WS 2025/26 | Vertiefung Energie- und Verfahrenstechnik |
| SS 2026 | Vertiefung Energie- und Verfahrenstechnik | |
| WS 2026/27 | Vertiefung Energie- und Verfahrenstechnik | |
| Regenerative Energy Systems StuPO 2023 | WS 2025/26 | Wahlpflichtmodule › Fachspezifische Wahlpflicht RES › Technik |
| SS 2026 | Wahlpflichtmodule › Fachspezifische Wahlpflicht RES › Technik | |
| WS 2026/27 | Wahlpflichtmodule › Fachspezifische Wahlpflicht RES › Technik | |
| Sustainable Energy and Process Engineering StuPO 2024 | WS 2025/26 | Wahlpflichtmodule › Fachspezifische Wahlpflicht SEPE › Advanced Sustainable Processes |
| SS 2026 | Wahlpflichtmodule › Fachspezifische Wahlpflicht SEPE › Advanced Sustainable Processes | |
| WS 2026/27 | Wahlpflichtmodule › Fachspezifische Wahlpflicht SEPE › Advanced Sustainable Processes |
Miscellaneous
Not specified