Process and Plant DynamicsModule description #30523 / Version 9
- 6 CP
- Oral exam
- Graded
- Summer semester
- English, German
| Module / Version | #30523 / #9 |
|---|---|
| Validity | Since Winter semester 2025/26 |
| Available language(s) | English, German |
| Credit points | 6 |
| Person responsible for the module | Repke, Jens-Uwe |
| Grading | Graded |
| Exam format | Oral exam |
| Language(s) of instruction | English, German |
Affiliation
| Faculty | Fakultät III |
|---|---|
| Institute | Institut für Prozess und Verfahrenstechnik |
| Academic chair | 33351500 FG Dynamik und Betrieb technischer Anlagen |
Contact
| Office | KWT 9 |
|---|---|
| Contact person | Rohde, Niclas |
| E-mail address | lehre@dbta.tu-berlin.de |
| Website | https://www.tu.berlin/dbta/studium-lehre/lehrveranstaltungen-i/prozessmodellierung |
Learning outcomes
Outcome
The students
- have basic knowledge on process modeling and can systematically derive models for technical processes and practical examples,
- can independently develop and evaluate models and work out solutions for entire processes for optimal, flexible, and safe operation,
- are competent in selecting and applying suitable solution methods for process models,
- are able to integrate process models into process simulations, providing necessary specifications and solver information,
- have problem-solving competence for the evaluation of dynamic process behavior,
- are able to build up suitable (plant-wide) control schemes based on process model and the system dynamics.
The course imparts:
40% knowledge & understanding, 20% analysis & methodology, 20% development & design,
20 % Application & Practice
The students
- have basic knowledge on process modeling and can systematically derive models for technical processes and practical examples,
- can independently develop and evaluate models and work out solutions for entire processes for optimal, flexible, and safe operation,
- are competent in selecting and applying suitable solution methods for process models,
- are able to integrate process models into process simulations, providing necessary specifications and solver information,
- have problem-solving competence for the evaluation of dynamic process behavior,
- are able to build up suitable (plant-wide) control schemes based on process model and the system dynamics.
The course imparts:
40% knowledge & understanding, 20% analysis & methodology, 20% development & design,
20 % Application & Practice
Content
Process and Plant Dynamics or Process Modeling deals with the fundamentals of modeling process found in process engineering. For this purpose, a systematic modeling scheme based on first-principles modeling is introduced and applied using process engineering examples. First, models for steady-state processes are developed before dynamic process modeling using differential equation systems and differential algebra systems is outlined. For all occurring model structures, common solution methods are presented and directly applied to formulated models. In addition, process dynamics as well as the development of plant-wide control schemes are discussed.
The lecture covers in detail:
- Definitions of process and models
- Development of a universal systematic modeling scheme
- Steady-state and dynamic modeling of typical process engineering units
- Discussion and application of flow-driven, pressure-driven and non-equilibrium modeling
- Analysis and solution of AE, ODE and DAE equation systems
- Degree of freedom analysis and setup of process simulations
- Data driven modeling
- Analysis of process dynamics and influence of reactions, heat recoveries and recycle flows
- Plant-wide process control concepts
Exercise contents:
- In depth discussion of the lecture contents using complete process modeling examples
- Application and deepening of the modeling systematics
- Processes: mixer, splitter, CSTR, SBR, flash, rectification column
- Derivation and application of solution methods for obtained equation systems
- Implementation of process simulations in Matlab
The lecture covers in detail:
- Definitions of process and models
- Development of a universal systematic modeling scheme
- Steady-state and dynamic modeling of typical process engineering units
- Discussion and application of flow-driven, pressure-driven and non-equilibrium modeling
- Analysis and solution of AE, ODE and DAE equation systems
- Degree of freedom analysis and setup of process simulations
- Data driven modeling
- Analysis of process dynamics and influence of reactions, heat recoveries and recycle flows
- Plant-wide process control concepts
Exercise contents:
- In depth discussion of the lecture contents using complete process modeling examples
- Application and deepening of the modeling systematics
- Processes: mixer, splitter, CSTR, SBR, flash, rectification column
- Derivation and application of solution methods for obtained equation systems
- Implementation of process simulations in Matlab
Module components
Compulsory area
The following courses are mandatory for this module:
| Courses | Type | Number | Frequency | Language | Hours per week | Course catalog |
|---|---|---|---|---|---|---|
| Prozess- und Anlagendynamik | Lecture | 0339 L 401 | Summer semester | [en, de] | 4 | WS 2026/27 (1) ISIS |
| Prozess- und Anlagendynamik | Exercise | 0339 L 402 | Summer semester | [en, de] | 2 | WS 2026/27 (1) ISIS |
Courses in the course catalog
Courses created from the teaching units of this module.
Winter semester 2026/27 (2)
Prozess- und Anlagendynamik (Lecture) 1
- Prozessmodellierung (Vorlesung) Termingruppe 1 0339 L 401
Prozess- und Anlagendynamik (Exercise) 1
- Prozessmodellierung (Übung) Termingruppe 1 0339 L 402
Workload and credit points
Prozess- und Anlagendynamik (Lecture)
| Workload description | Multiplier | Hours | Total |
|---|---|---|---|
| presence time | 15 | 4 h | 60 h |
| Pre- / Postprocessing | 15 | 1 h | 15 h |
| 75 h | |||
Prozess- und Anlagendynamik (Exercise)
| Workload description | Multiplier | Hours | Total |
|---|---|---|---|
| presence time | 15 | 2 h | 30 h |
| Pre- / Postprocessing | 15 | 1 h | 15 h |
| 45 h | |||
Course-independent workload
| Workload description | Multiplier | Hours | Total |
|---|---|---|---|
| exam preparation | 1 | 60 h | 60 h |
| 60 h | |||
The workload of the module adds up to 180 hours. The module therefore comprises 6 credit points.
Description of teaching and learning methods
Standard lectures with embedded programming examples. Exercises are demonstrated and solved together with lecturer, while given examples simulated using Matlab. Exercises can be further studied using the departments PC pool.
Requirements for participation and examination
Desirable prerequisites for participation in the courses:
Thermodynamics, fundamental of process engineering, thermal engineering units, and process control.
Mandatory requirements for the module examination registration:
This module has no examination requirements.
Completion of the module
| Grading | Graded |
|---|---|
| Exam format | Oral exam |
| Language | English, German |
| Duration/Extent | 45 minutes |
Exam description
Students are given a modeling task at the beginning of the examination and prepare it briefly in writing at their leisure. The examination interview then begins, in which the students are asked questions about the model they have formulated and about the other content of the module.
Duration of the module
The following number of semesters is estimated for taking and completing the module: 1 semester(s).
This module can be started in the following semesters: Summer semester.
Maximum number of participants
This module is not limited to a number of students.
Registration procedures
Exam registration officially via the MTS.
Exam scheduling is organized via: https://mosaic.service.tu-berlin.de/mosaic/examen/
Exam scheduling is organized via: https://mosaic.service.tu-berlin.de/mosaic/examen/
Recommended reading, lecture notes
Lecture notes
unavailable
Electronic lecture notes
available
Recommended literature
No recommended literature given
Assigned programs
This module version is used in the following programs:
| Program / program version | Semester(s) | Curriculum component |
|---|---|---|
| Computational Engineering Science (Informationstechnik im Maschinenwesen) StuPO 2018 (17.01.2018) | WS 2025/26 | 4. Profilbereich › 4.1 Profilbereich: Prozess- und Systemtechnik |
| SS 2026 | 4. Profilbereich › 4.1 Profilbereich: Prozess- und Systemtechnik | |
| WS 2026/27 | 4. Profilbereich › 4.1 Profilbereich: Prozess- und Systemtechnik | |
| Energy Engineering and Process Engineering StuPO 2009 | WS 2025/26 | Pflichtmodule |
| SS 2026 | Pflichtmodule | |
| WS 2026/27 | Pflichtmodule | |
| Engineering Science StuPO 2007 (19.12.2007) | WS 2025/26 | 2.5 Thermodynamik › 2.5b Ergänzungsbereich |
| SS 2026 | 2.5 Thermodynamik › 2.5b Ergänzungsbereich | |
| Engineering Science StuPO 2020 | WS 2025/26 | 2.5 Thermodynamik › 2.5b Ergänzungsbereich |
| SS 2026 | 2.5 Thermodynamik › 2.5b Ergänzungsbereich | |
| WS 2026/27 | 2.5 Thermodynamik › 2.5b Ergänzungsbereich | |
| Process Energy and Environmental Systems Engineering Process Energy and Environmental Systems Engineering (M. Sc.) - StuPO 2016 | WS 2025/26 | Pflichtmodule |
| SS 2026 | Pflichtmodule | |
| Process Energy and Environmental Systems Engineering StuPO 2022 | WS 2025/26 | Pflichtmodule |
| SS 2026 | Pflichtmodule | |
| WS 2026/27 | Pflichtmodule |
Miscellaneous
Not specified