Skip to content
Technische Universität Berlin Deutsch
Course catalog and module transfer system

Structure and Parameter Identification / System identificationModule description #30534 / Version 8

← Module page Deutsche Fassung
Module / Version#30534 / #8
ValiditySince Summer semester 2024
Available language(s)English, German
Credit points6
Person responsible for the moduleKnorn, Steffi
GradingGraded
Exam formatPortfolio examination
Language(s) of instructionGerman

Affiliation

FacultyFakultät III
InstituteInstitut für Prozess und Verfahrenstechnik
Academic chair33351600 FG Regelungstechnik

Contact

OfficeER 2-1
Contact personKnorn, Steffi
E-mail addressKnorn@tu-berlin.de
Websitehttp://tu.berlin/ctrl

Learning outcomes

After successful participation, students can
- identify both the structure and parameters of a mathematical model
- compare the performance of different methods against each other
- design experiments in such a way that maximum information gain is obtained from them.

The event mainly conveys:
Technical competence 30%, Methodological competence 40%, System competence 20% and Social competence 10%.

Content

Test signals, least squares method, prediction error method, maximum likelihood method, nonlinear optimization, optimal experimental design, introduction to stochastics, bootstrapping method, introduction to model-based measurement methods / observers.

Module components

Compulsory area

The following courses are mandatory for this module:

CoursesTypeNumberFrequencyLanguageHours per weekCourse catalog
Struktur- und ParameteridentifikationIntegrated course0339 L 213 Summer semester–4 ISIS

Workload and credit points

Struktur- und Parameteridentifikation (Integrated course)

Workload descriptionMultiplierHoursTotal
teaching time (lectures and tutorials)154 h60 h
preparation and post processing154 h60 h
project / lab160 h60 h
180 h

The workload of the module adds up to 180 hours. The module therefore comprises 6 credit points.

Description of teaching and learning methods

Lectures and tutorials are used. At the end of the module, students work in groups on a project in which the theoretical approaches learned are put into practice.

Requirements for participation and examination

Desirable prerequisites for participation in the courses:

a) Mandatory: "Fundamentals of Measurement and Control Engineering", "Signals and Systems (for Process Engineering)" or similar modules
b) Desirable: Knowledge of MATLAB/SIMULINK, e.g. from "Computer-aided exercises in control engineering"

Mandatory requirements for the module examination registration:

This module has no examination requirements.

Completion of the module

GradingGraded
Exam formatPortfolio examination
Type of portfolio examination100 points in total
LanguageEnglish, German

Test elements

NamePoints/WeightCategoryDuration/Extent
project presentation40oral10 minutes
oral exam60oral30 minutes

Exam description

The grade consists of 40% of the performance of a project work and 60% of an oral examination.

The project takes place after the lecture period.

Duration of the module

The following number of semesters is estimated for taking and completing the module: 1 semester(s).

This module can be started in the following semesters: Summer semester.

Maximum number of participants

This module is not limited to a number of students.

Registration procedures

Register for the exam via the Examination Office or online.

Recommended reading, lecture notes

Lecture notes

unavailable

Electronic lecture notes

available – ISIS website

Recommended literature

No recommended literature given

Assigned programs

This module version is used in the following programs:

Program / program versionSemester(s)Curriculum component
Aeronautics and Astronautics
StuPO 2018
SS 20251. Ingenieurwissenschaftliche Methoden › 1.4 Regelungstechnik, Elektronik und Software-Engineering
WS 2025/261. Ingenieurwissenschaftliche Methoden › 1.4 Regelungstechnik, Elektronik und Software-Engineering
SS 20261. Ingenieurwissenschaftliche Methoden › 1.4 Regelungstechnik, Elektronik und Software-Engineering
WS 2026/271. Ingenieurwissenschaftliche Methoden › 1.4 Regelungstechnik, Elektronik und Software-Engineering
Computational Engineering Science (Informationstechnik im Maschinenwesen)
StuPO 2018 (17.01.2018)
SS 20253. Kernbereich: Messen, Steuern, Regeln
WS 2025/263. Kernbereich: Messen, Steuern, Regeln
SS 20263. Kernbereich: Messen, Steuern, Regeln
WS 2026/273. Kernbereich: Messen, Steuern, Regeln
Energy Engineering and Process Engineering
StuPO 2009
SS 2025Rechnergestützte Methoden
WS 2025/26Rechnergestützte Methoden
SS 2026Rechnergestützte Methoden
WS 2026/27Rechnergestützte Methoden
Engineering Science
StuPO 2007 (19.12.2007)
SS 20252.1 Numerik und Simulation › 2.1b Ergänzungsbereich
WS 2025/262.3 Mechatronik › 2.3b Ergänzungsbereich
SS 20262.3 Mechatronik › 2.3b Ergänzungsbereich
Engineering Science
StuPO 2020
SS 20252.1 Numerik und Simulation › 2.1b Ergänzungsbereich
WS 2025/262.3 Mechatronik › 2.3b Ergänzungsbereich
SS 20262.3 Mechatronik › 2.3b Ergänzungsbereich
WS 2026/272.1 Numerik und Simulation › 2.1b Ergänzungsbereich
Regenerative Energy Systems
StuPO 2023
SS 2025Wahlpflichtmodule › Fachspezifische Wahlpflicht RES › Systeme und Integration
WS 2025/26Wahlpflichtmodule › Fachspezifische Wahlpflicht RES › Systeme und Integration
SS 2026Wahlpflichtmodule › Fachspezifische Wahlpflicht RES › Systeme und Integration
WS 2026/27Wahlpflichtmodule › Fachspezifische Wahlpflicht RES › Systeme und Integration
Sustainable Energy and Process Engineering
StuPO 2024
SS 2025Wahlpflichtmodule › Fachspezifische Wahlpflicht SEPE › Computational Methods
WS 2025/26Wahlpflichtmodule › Fachspezifische Wahlpflicht SEPE › Computational Methods
SS 2026Wahlpflichtmodule › Fachspezifische Wahlpflicht SEPE › Computational Methods
WS 2026/27Wahlpflichtmodule › Fachspezifische Wahlpflicht SEPE › Computational Methods
Technomathematics
Technomathematics (M. Sc.) - StuPO 2014
SS 2025Studienrichtungen › Physikalische Ingenieurwissenschaft › Physikalische Ingenieurwissenschaft › Mechatronik
WS 2025/26Studienrichtungen › Physikalische Ingenieurwissenschaft › Physikalische Ingenieurwissenschaft › Mechatronik
SS 2026Studienrichtungen › Physikalische Ingenieurwissenschaft › Physikalische Ingenieurwissenschaft › Mechatronik
WS 2026/27Studienrichtungen › Physikalische Ingenieurwissenschaft › Physikalische Ingenieurwissenschaft › Mechatronik
Dieses Modul wird auf folgenden Modullisten verwendet:

Energie- und Verfahrenstechnik (Master of Science)
Informationstechnik im Maschinenwesen (Master of Science)
Physikalische Ingenieurwissenschaft (Master of Science)
Technomathematik (Master of Science)

Miscellaneous

literature: see lecture script