High Performance CeramicsModule description #30547 / Version 8
- 6 CP
- Portfolio examination
- Graded
- Winter and summer semester
- English
| Module / Version | #30547 / #8 |
|---|---|
| Validity | Since Summer semester 2025 |
| Available language(s) | German |
| Credit points | 6 |
| Person responsible for the module | Gurlo, Aleksander |
| Grading | Graded |
| Exam format | Portfolio examination |
| Language(s) of instruction | English |
Affiliation
| Faculty | Fakultät III |
|---|---|
| Institute | Institut für Werkstoffwissenschaften und -technologien |
| Academic chair | 33341300 FG Keramische Werkstoffe |
Contact
| Office | BA 3 |
|---|---|
| Contact person | Amtsfeld, Anne-Claude |
| E-mail address | gurlo@ceramics.tu-berlin.de |
| Website | http://www.keramik.tu-berlin.de/ |
Learning outcomes
1) Rietveld Refinement:
The students will get a good knowledge about XRD diffraction technique for material characterizations. They will learn how to
(i) prepare different samples for different XRD measurement methods,
(ii) use XRD diffractometer, (iii) make phase analysis by matching software and
(iii) perform structure refinement by Rietveld method.
2) Electroceramics for Energy Conversion and Storage: Batteries, Thermoelectrics, Supercapacitors
In this course the students will:
(i) develop a deep understanding of requirements for ceramic materials for energy applications,
(ii) understand and present a structure-property relationship
(iii) know, understand and explain different methods for the synthesis, processing and characterization of ceramic materials for energy applications.
3) Ceramics for the Hydrogen Economy: Catalysts, Membranes, Storage Materials, Photocatalysts and Materials for Fuel Cells
In this course the students will:
(i) gain an understanding of the challenges of the hydrogen economy
(ii) understand the various approaches to production, transport, storage and conversion of hydrogen energy
(iii) acquire new knowledge relating to the application of materials in general, and ceramic materials in particular, to the above aspects of the hydrogen economy
(iv) demonstrate a critical understanding of applied hydrogen fuel cell vehicle design
4) Porous Ceramics for Catalysis and Membrane Technology
In this course the students
(i) will gain extensive knowledge of various processes for the production of meso-, micro- and macroporous ceramics and membranes,
(ii) are introduced into the different characterization methods for determining the pore properties of porous ceramics and membranes,
(iii) gain practical insight into the use of porous ceramics in catalysis and membrane technology,
(iv) learn to produce and characterize selected porous ceramics.
The students will get a good knowledge about XRD diffraction technique for material characterizations. They will learn how to
(i) prepare different samples for different XRD measurement methods,
(ii) use XRD diffractometer, (iii) make phase analysis by matching software and
(iii) perform structure refinement by Rietveld method.
2) Electroceramics for Energy Conversion and Storage: Batteries, Thermoelectrics, Supercapacitors
In this course the students will:
(i) develop a deep understanding of requirements for ceramic materials for energy applications,
(ii) understand and present a structure-property relationship
(iii) know, understand and explain different methods for the synthesis, processing and characterization of ceramic materials for energy applications.
3) Ceramics for the Hydrogen Economy: Catalysts, Membranes, Storage Materials, Photocatalysts and Materials for Fuel Cells
In this course the students will:
(i) gain an understanding of the challenges of the hydrogen economy
(ii) understand the various approaches to production, transport, storage and conversion of hydrogen energy
(iii) acquire new knowledge relating to the application of materials in general, and ceramic materials in particular, to the above aspects of the hydrogen economy
(iv) demonstrate a critical understanding of applied hydrogen fuel cell vehicle design
4) Porous Ceramics for Catalysis and Membrane Technology
In this course the students
(i) will gain extensive knowledge of various processes for the production of meso-, micro- and macroporous ceramics and membranes,
(ii) are introduced into the different characterization methods for determining the pore properties of porous ceramics and membranes,
(iii) gain practical insight into the use of porous ceramics in catalysis and membrane technology,
(iv) learn to produce and characterize selected porous ceramics.
Content
1) Rietveld Refinement:
The main topic will be the Rietveld-refinement, i.e. the improvement of structure solutions from powder data. Theoretical and practical aspects will be discussed. The students will measure XRD pattern of some samples and refine their data. In addition, further aspects of powder diffraction like structure parameters determination, phase analysis, texture determination, crystallite size determination, preferred orientation analysis and residual stress measurement will betreated.
2) Electroceramics for Energy Conversion and Storage: Batteries, Thermoelectrics, Supercapacitors
Introduction to the fundamental physical, chemical and material science as well as to the synthesis and fabrication methods of ceramic materials for the aforementioned applications
3) Ceramics for the Hydrogen Economy: Catalysts, Membranes, Storage Materials, Photocatalysts and Materials for Fuel Cells
Introduction to the fundamental physical, chemical and material science as well as to the synthesis and fabrication methods of ceramic materials for the aforementioned applications
4) Porous Ceramics for Catalysis and Membrane Technology
The production, characterization and application of porous ceramics and membranes is taught. The students will be introduced to methods for the production of micro, meso and macroporous ceramics. Appropriate characterization methods for the determination of pore properties are treated and practical application examples for use in catalysis and membrane technology are shown. In the practical course the production of selected porous ceramics and their characterization will be treated.
The main topic will be the Rietveld-refinement, i.e. the improvement of structure solutions from powder data. Theoretical and practical aspects will be discussed. The students will measure XRD pattern of some samples and refine their data. In addition, further aspects of powder diffraction like structure parameters determination, phase analysis, texture determination, crystallite size determination, preferred orientation analysis and residual stress measurement will betreated.
2) Electroceramics for Energy Conversion and Storage: Batteries, Thermoelectrics, Supercapacitors
Introduction to the fundamental physical, chemical and material science as well as to the synthesis and fabrication methods of ceramic materials for the aforementioned applications
3) Ceramics for the Hydrogen Economy: Catalysts, Membranes, Storage Materials, Photocatalysts and Materials for Fuel Cells
Introduction to the fundamental physical, chemical and material science as well as to the synthesis and fabrication methods of ceramic materials for the aforementioned applications
4) Porous Ceramics for Catalysis and Membrane Technology
The production, characterization and application of porous ceramics and membranes is taught. The students will be introduced to methods for the production of micro, meso and macroporous ceramics. Appropriate characterization methods for the determination of pore properties are treated and practical application examples for use in catalysis and membrane technology are shown. In the practical course the production of selected porous ceramics and their characterization will be treated.
Module components
compulsory elective
A selection of the following courses must be completed:
| Courses | Type | Number | Frequency | Language | Hours per week | Course catalog |
|---|---|---|---|---|---|---|
| Electroceramics for Energy Conversion and Storage: Batteries, Thermoelectrics, Supercapacitors | Integrated course | 0334 L 188 | Winter semester | – | 2 | WS 2026/27 (1) ISIS |
| Porous Ceramics for Catalysis and Membrane Technology | Integrated course | 0334 L 178 | Summer semester | – | 2 | ISIS |
| Rietveld Refinement | Integrated course | 0334 L 171 | Summer semester | – | 2 | ISIS |
Courses in the course catalog
Courses created from the teaching units of this module.
Winter semester 2026/27 (1)
Electroceramics for Energy Conversion and Storage: Batteries, Thermoelectrics, Supercapacitors (Integrated course) 1
Workload and credit points
Electroceramics for Energy Conversion and Storage: Batteries, Thermoelectrics, Supercapacitors (Integrated course)
| Workload description | Multiplier | Hours | Total |
|---|---|---|---|
| E-Learning | 15 | 1 h | 15 h |
| Attendance | 15 | 2 h | 30 h |
| Exam preparation | 1 | 15 h | 15 h |
| Pre/post processing | 15 | 2 h | 30 h |
| 90 h | |||
Porous Ceramics for Catalysis and Membrane Technology (Integrated course)
| Workload description | Multiplier | Hours | Total |
|---|---|---|---|
| E-Learning | 15 | 1 h | 15 h |
| Attendance | 15 | 2 h | 30 h |
| Exam preparation | 1 | 15 h | 15 h |
| Pre/post processing | 15 | 2 h | 30 h |
| 90 h | |||
Rietveld Refinement (Integrated course)
| Workload description | Multiplier | Hours | Total |
|---|---|---|---|
| E-Learning | 15 | 1 h | 15 h |
| Attendance | 15 | 2 h | 30 h |
| Exam preparation | 1 | 15 h | 15 h |
| Pre/post processing | 15 | 2 h | 30 h |
| 90 h | |||
The workload of the module adds up to 270 hours. The module therefore comprises 6 credit points.
Description of teaching and learning methods
Lectures, project work, practical, exercises, presentation
Requirements for participation and examination
Desirable prerequisites for participation in the courses:
This module has no desirable prerequisites for the courses.
Mandatory requirements for the module examination registration:
This module has no examination requirements.
Completion of the module
| Grading | Graded |
|---|---|
| Exam format | Portfolio examination |
| Type of portfolio examination | 100 points in total |
| Language | English, German |
Test elements
| Name | Points/Weight | Category | Duration/Extent |
|---|---|---|---|
| Electroceramics for Energy Conversion and Storage: Batteries, Thermoelectrics, Supercapacitors | 50 | written | 45 min |
| Porous Ceramics for Catalysis and Membrane Technology | 50 | flexibel | 30 min |
| Rietveld Refinement | 50 | flexibel | 45 min |
Duration of the module
The following number of semesters is estimated for taking and completing the module: 1 semester(s).
This module can be started in the following semesters: Winter and summer semester.
Maximum number of participants
This module is not limited to a number of students.
Registration procedures
Die Anmeldung zur Prüfung erfolgt im zuständigen Prüfungsamt.
Recommended reading, lecture notes
Lecture notes
unavailable
Electronic lecture notes
available – auf ISIS, themenspezifisch
Recommended literature
- Literatur wird in der ersten Lehrveranstaltungsstunde benannt.
Assigned programs
This module version is used in the following programs:
| Program / program version | Semester(s) | Curriculum component |
|---|---|---|
| Material Science and Engineering StuPO 2009 | SS 2025 | Vertiefungsmodule |
| WS 2025/26 | Vertiefungsmodule | |
| SS 2026 | Vertiefungsmodule | |
| WS 2026/27 | Vertiefungsmodule | |
| Material Science and Engineering Material Science and Engineering (M. Sc.) - StuPO 2024 | SS 2025 | Fachzspezifische Wahlpflicht › Natur- und ingenieurwissenschaftliche Aspekte der Materialwissenschaft und Werkstofftechnik › FG Keramische Werkstoffe |
| WS 2025/26 | Fachzspezifische Wahlpflicht › Natur- und ingenieurwissenschaftliche Aspekte der Materialwissenschaft und Werkstofftechnik › FG Keramische Werkstoffe | |
| SS 2026 | Fachzspezifische Wahlpflicht › Natur- und ingenieurwissenschaftliche Aspekte der Materialwissenschaft und Werkstofftechnik › FG Keramische Werkstoffe | |
| WS 2026/27 | Fachzspezifische Wahlpflicht › Natur- und ingenieurwissenschaftliche Aspekte der Materialwissenschaft und Werkstofftechnik › FG Keramische Werkstoffe |
Master Werkstoffwissenschaften
Wahlpflicht
Wahlpflicht
Miscellaneous
Einige Veranstaltungen werden u.U. als Blockvorlesung angeboten.