Introduction to Additive Manufacturing (3D Printing) - ProcessesModule description #30667 / Version 5
- 6 CP
- Portfolio examination
- Graded
- Summer semester
- English
| Module / Version | #30667 / #5 |
|---|---|
| Validity | Since Summer semester 2026 |
| Available language(s) | English, German |
| Credit points | 6 |
| Person responsible for the module | Karl, David |
| Grading | Graded |
| Exam format | Portfolio examination |
| Language(s) of instruction | English |
Affiliation
| Faculty | Fakultät III |
|---|---|
| Institute | Institut für Werkstoffwissenschaften und -technologien |
| Academic chair | 33341300 FG Keramische Werkstoffe |
Contact
| Office | BA 3 |
|---|---|
| Contact person | Karl, David |
| E-mail address | itam@ceramics.tu-berlin.de |
| Website | https://www.tu.berlin/ceramics |
Learning outcomes
Learning Outcomes:
The participants will gain a comprehensive overview and can communicate general principles of all seven Additive Manufacturing (AM) process categories, processing routes and their terminology. They will learn and understand the strengths and weaknesses of different AM technologies and specific feedstock materials. Furthermore, the students will be given the chance to experience major AM technologies firsthand in a practical part.
The participants will gain a comprehensive overview and can communicate general principles of all seven Additive Manufacturing (AM) process categories, processing routes and their terminology. They will learn and understand the strengths and weaknesses of different AM technologies and specific feedstock materials. Furthermore, the students will be given the chance to experience major AM technologies firsthand in a practical part.
Content
Teaching contents:
The course gives a general introduction to Additive Manufacturing (AM), also known as 3D Printing, with a clear focus on how AM processes operate and what defines each process category. The module explains how components are built layer by layer across different technologies, outlining the core mechanisms that drive each process and the factors that influence precision, resolution, build speed, and overall process capability. The content also covers typical process-related challenges, such as accuracy limits, support strategies, thermal effects, and surface quality. Students learn how AM processes differ in principle, performance, and applicability.
Coursework will emphasise the AM processes themselves, their operating principles, key parameters, comparative characteristics, and hands-on understanding of all major AM technologies:
(I) Vat photopolymerization (VPP): Stereolithography (SLA), Digital Light Processing (DLP), Continuous Liquid Interface Production (CLIP), Volumetric Additive Manufacturing (VAM), Two-Photon Polymerization (2PP)
(II) Material jetting (MJT): PolyJet, NanoParticle Jetting (NPJ)
(III) Binder jetting (BJT): Powder-based 3D Printing (3DP), Metal Binder Jetting
(IV) Powder bed fusion (PBF): Laser Sintering (LS), Multi Jet Fusion (MJF), Selective Laser Melting (SLM), Electron Beam Melting (EBM)
(V) Material extrusion (MEX): Fused Deposition Modelling (FDM), Robocasting / Direct Ink Writing (DIW)
(VI) Directed energy deposition (DED): Directed Laser Deposition (DLD), Laser Engineering Net Shape (LENS)
(VII) Sheet lamination (SHL): Laminated Object Manufacturing (LOM), Ultrasonic Additive Manufacturing (UAM)
A complementary course, ‘Introduction to Additive Manufacturing (3D Printing) - Design and Materials’ will be offered in each winter semester. The combination of both modules provides a comprehensive understanding of the most relevant aspects of additive manufacturing (3D printing): processes, design and materials.
The course gives a general introduction to Additive Manufacturing (AM), also known as 3D Printing, with a clear focus on how AM processes operate and what defines each process category. The module explains how components are built layer by layer across different technologies, outlining the core mechanisms that drive each process and the factors that influence precision, resolution, build speed, and overall process capability. The content also covers typical process-related challenges, such as accuracy limits, support strategies, thermal effects, and surface quality. Students learn how AM processes differ in principle, performance, and applicability.
Coursework will emphasise the AM processes themselves, their operating principles, key parameters, comparative characteristics, and hands-on understanding of all major AM technologies:
(I) Vat photopolymerization (VPP): Stereolithography (SLA), Digital Light Processing (DLP), Continuous Liquid Interface Production (CLIP), Volumetric Additive Manufacturing (VAM), Two-Photon Polymerization (2PP)
(II) Material jetting (MJT): PolyJet, NanoParticle Jetting (NPJ)
(III) Binder jetting (BJT): Powder-based 3D Printing (3DP), Metal Binder Jetting
(IV) Powder bed fusion (PBF): Laser Sintering (LS), Multi Jet Fusion (MJF), Selective Laser Melting (SLM), Electron Beam Melting (EBM)
(V) Material extrusion (MEX): Fused Deposition Modelling (FDM), Robocasting / Direct Ink Writing (DIW)
(VI) Directed energy deposition (DED): Directed Laser Deposition (DLD), Laser Engineering Net Shape (LENS)
(VII) Sheet lamination (SHL): Laminated Object Manufacturing (LOM), Ultrasonic Additive Manufacturing (UAM)
A complementary course, ‘Introduction to Additive Manufacturing (3D Printing) - Design and Materials’ will be offered in each winter semester. The combination of both modules provides a comprehensive understanding of the most relevant aspects of additive manufacturing (3D printing): processes, design and materials.
Module components
Compulsory area
The following courses are mandatory for this module:
| Courses | Type | Number | Frequency | Language | Hours per week | Course catalog |
|---|---|---|---|---|---|---|
| Introduction to Additive Manufacturing (3D Printing) - Processes | Integrated course | 3413 L 003 | Summer semester | [en] | 4 | ISIS |
Workload and credit points
Introduction to Additive Manufacturing (3D Printing) - Processes (Integrated course)
| Workload description | Multiplier | Hours | Total |
|---|---|---|---|
| Attendance | 15 | 4 h | 60 h |
| Pre/post processing | 15 | 4 h | 60 h |
| E-Learning | 15 | 1 h | 15 h |
| 135 h | |||
Course-independent workload
| Workload description | Multiplier | Hours | Total |
|---|---|---|---|
| Report preparation | 15 | 2 h | 30 h |
| Exam preparation | 1 | 15 h | 15 h |
| 45 h | |||
The workload of the module adds up to 180 hours. The module therefore comprises 6 credit points.
Description of teaching and learning methods
The module consists of a lecture and a practical seminar course (practical part).
Requirements for participation and examination
Desirable prerequisites for participation in the courses:
This module has no desirable prerequisites for the courses.
Mandatory requirements for the module examination registration:
This module has no examination requirements.
Completion of the module
| Grading | Graded |
|---|---|
| Exam format | Portfolio examination |
| Type of portfolio examination | 100 points in total |
| Language | English |
Test elements
| Name | Points/Weight | Category | Duration/Extent |
|---|---|---|---|
| Written examination | 70 | written | 60 min |
| Written report on practical course | 30 | written | 15-20 pages scientific report |
Duration of the module
The following number of semesters is estimated for taking and completing the module: 1 semester(s).
This module can be started in the following semesters: Summer semester.
Maximum number of participants
The maximum capacity of participants is 40.
Registration procedures
The registration for the portfolio examination must be done in Moses. Registration must be completed one working day before the first submission on ISIS for the course is due.
Recommended reading, lecture notes
Lecture notes
unavailable
Electronic lecture notes
available – on ISIS platform
Recommended literature
- Gibson, Rosen, Stucker, Khorasani (2021): Additive Manufacturing Technologies, 3rd Edition. Springer ISBN 978-3-030-56126-0
- Gebhardt, Andreas; Hötter, Jan-Steffen (2016): Additive Manufacturing. 3D printing for prototyping and manufacturing. Munich, Cincinnati, OH: Carl Hanser Fachbuchverlag
- ISO/ASTM 52900:2021, 2021-11: Additive manufacturing - General principles - Fundamentals and vocabulary
- ISO 17296-2:2015, 2015-01: Additive manufacturing - General principles - Part 2: Overview of process categories and feedstock
Assigned programs
This module version is used in the following programs:
| Program / program version | Semester(s) | Curriculum component |
|---|---|---|
| Biomedical Engineering StuPO 2018 | SS 2026 | 2. Wahlpflichtmodule › 2.2 Ingenieurwissenschaftliche Vertiefungen |
| WS 2026/27 | 2. Wahlpflichtmodule › 2.2 Ingenieurwissenschaftliche Vertiefungen | |
| Material Science and Engineering StuPO 2009 | SS 2026 | Vertiefungsmodule |
| WS 2026/27 | Vertiefungsmodule | |
| Material Science and Engineering Material Science and Engineering (M. Sc.) - StuPO 2024 | SS 2026 | Fachzspezifische Wahlpflicht › Natur- und ingenieurwissenschaftliche Aspekte der Materialwissenschaft und Werkstofftechnik › FG Keramische Werkstoffe |
| WS 2026/27 | Fachzspezifische Wahlpflicht › Natur- und ingenieurwissenschaftliche Aspekte der Materialwissenschaft und Werkstofftechnik › FG Keramische Werkstoffe | |
| Materialwissenschaft und Werkstofftechnik StuPO 2022 | SS 2026 | Fachspezifischer Wahlpflichtbereich › Natur- und ingenieurwissenschaftliche Aspekte der Materialwissenschaft und Werkstofftechnik |
| WS 2026/27 | Fachspezifischer Wahlpflichtbereich › Natur- und ingenieurwissenschaftliche Aspekte der Materialwissenschaft und Werkstofftechnik | |
| Mechanical Engineering StuPO 2017 | SS 2026 | Wahlpflichtmodule › Profilmodule › Werkstoffe |
| WS 2026/27 | Wahlpflichtmodule › Profilmodule › Werkstoffe |
Miscellaneous
Not specified