Modern characterisation methods of materials and structuresModule description #30679 / Version 1
- 6 CP
- Portfolio examination
- Graded
- Winter semester
- German
This module description is not valid in the current semester (Winter semester 2026/27).
Current version (v4)
| Module / Version | #30679 / #1 |
|---|---|
| Validity | SS 2018 – Winter semester 2023/24 |
| Available language(s) | German |
| Credit points | 6 |
| Person responsible for the module | Fleck, Claudia |
| Grading | Graded |
| Exam format | Portfolio examination |
| Language(s) of instruction | German |
Affiliation
| Faculty | Fakultät III |
|---|---|
| Institute | Institut für Werkstoffwissenschaften und -technologien |
| Academic chair | 33341100 FG Werkstofftechnik |
Contact
| Office | Not specified |
|---|---|
| Contact person | Fleck, Claudia |
| E-mail address | claudia.fleck@tu-berlin.de |
| Website | https://www.tu.berlin/fgwtberlin/ |
Learning outcomes
Mechanische Analyse durch angewandte FEM:
- Usage of the finite element tool in a material science research environment
- Analysis of the mechanics
- Basic overview of finite element material models
Praktische Anwendungen von Synchrotronmethoden in der Biomaterialforschung:
The students
- will learn about recent biomaterial research such as material properties and toxicological aspects
- get an introduction into synchrotron technology and its (unique) use for biomaterial research
- get to know how to do experiments at synchrotrons
- will learn how to analyze and interpret results of biomaterial analyses performed at synchrotrons
Die Veranstaltung vermittelt:
20 % Wissen & Verstehen, 30 % Analyse und Methodik, 20 % Recherche & Bewertung, 20 % Anwendung & Praxis, 10 % Soziale Kompetenz
- Usage of the finite element tool in a material science research environment
- Analysis of the mechanics
- Basic overview of finite element material models
Praktische Anwendungen von Synchrotronmethoden in der Biomaterialforschung:
The students
- will learn about recent biomaterial research such as material properties and toxicological aspects
- get an introduction into synchrotron technology and its (unique) use for biomaterial research
- get to know how to do experiments at synchrotrons
- will learn how to analyze and interpret results of biomaterial analyses performed at synchrotrons
Die Veranstaltung vermittelt:
20 % Wissen & Verstehen, 30 % Analyse und Methodik, 20 % Recherche & Bewertung, 20 % Anwendung & Praxis, 10 % Soziale Kompetenz
Content
Mechanische Analyse durch angewandte FEM:
(i) Practical use of a finite element software
(ii) Creation of finite element geometry based on tomography data
(iii) Application of material models in finite element
(iv) Mechanical evaluation of finite element results
Praktische Anwendungen von Synchrotronmethoden in der Biomaterialforschung:
(i) Synchrotron: Introduction into synchrotron technology
(ii) Material characterization using X-ray flouresence, XRD and nanoCT
(iii) Case studies (i): µ and nano CT to characterize (bio) materials in 3D (data may be used for further FE investigation)
(iv) How to analyze big 3D data. 3D image processing and how to characterize morphology
(v) Case studies (ii): µXRF to characterize implant materials (Mg, Ti, ceramics) and the role of nano-particles
(vi) Introduction into XRF data processing
(vii) How to do an experiment at the synchrotron: Writing a beamtime application. What are the future demands on biomaterials?
(viii) The evaluation process of synchrotron beamtime applications. & Overall summary of the course.
(i) Practical use of a finite element software
(ii) Creation of finite element geometry based on tomography data
(iii) Application of material models in finite element
(iv) Mechanical evaluation of finite element results
Praktische Anwendungen von Synchrotronmethoden in der Biomaterialforschung:
(i) Synchrotron: Introduction into synchrotron technology
(ii) Material characterization using X-ray flouresence, XRD and nanoCT
(iii) Case studies (i): µ and nano CT to characterize (bio) materials in 3D (data may be used for further FE investigation)
(iv) How to analyze big 3D data. 3D image processing and how to characterize morphology
(v) Case studies (ii): µXRF to characterize implant materials (Mg, Ti, ceramics) and the role of nano-particles
(vi) Introduction into XRF data processing
(vii) How to do an experiment at the synchrotron: Writing a beamtime application. What are the future demands on biomaterials?
(viii) The evaluation process of synchrotron beamtime applications. & Overall summary of the course.
Module components
Compulsory area
The following courses are mandatory for this module:
Workload and credit points
Mechanische Analyse durch angewandte FEM (Integrated course)
| Workload description | Multiplier | Hours | Total |
|---|---|---|---|
| Präsenzzeit | 10 | 2 h | 20 h |
| FEM-Modellerstellung | 1 | 40 h | 40 h |
| Bericht und Präsentation | 1 | 30 h | 30 h |
| 90 h | |||
Praktische Anwendungen von Synchrotronmethoden in der Biomaterialforschung (Integrated course)
| Workload description | Multiplier | Hours | Total |
|---|---|---|---|
| Attendance | 15 | 2 h | 30 h |
| Vorbereitung der Evaluation der Proposal | 1 | 30 h | 30 h |
| Vorbereitung des Proposals | 1 | 30 h | 30 h |
| 90 h | |||
The workload of the module adds up to 180 hours. The module therefore comprises 6 credit points.
Description of teaching and learning methods
Mechanische Analyse durch angewandte FEM:
Während der Präsenzzeit werden Grundlagen der FEM vorgestellt und die Studierenden werden in die Nutzung der verwendeten
FEM-Software (derzeit Abaqus; Änderungen vorbehalten) eingeführt.
Im Teil "FEM-Modellerstellung" erstellen die Studierenden in freier Zeiteinteilung ein FEM-Modell, Die Dozentin steht im Rahmen vereinbarter Sprechstunden bei Problemen zur Verfügung.
Das Modell und die Simulationsergebnisse werden in einem Vortrag vorgestellt und in einem Bericht zusammengefasst.
Praktische Anwendungen von Synchrotronmethoden in der Biomaterialforschung
Während der Präsenzzeit werden Synchrotronmethoden an Hand aktueller Forschungsergebnisse vorgestellt. Weiterhin werden die Studierenden an Hand von Beispielen in die Erarbeitung eines eigenen fiktiven Proposals für eine Messzeit eingeführt.
Die Studierenden erarbeiten dann selbst ein Proposal; alle Proposals werden von den Studierenden als fiktive Gutachtergruppe bewertet. Die Diskussion der Gutachterentscheidung erfolgt ebenfalls in der Präsenzveranstaltung.
Während der Präsenzzeit werden Grundlagen der FEM vorgestellt und die Studierenden werden in die Nutzung der verwendeten
FEM-Software (derzeit Abaqus; Änderungen vorbehalten) eingeführt.
Im Teil "FEM-Modellerstellung" erstellen die Studierenden in freier Zeiteinteilung ein FEM-Modell, Die Dozentin steht im Rahmen vereinbarter Sprechstunden bei Problemen zur Verfügung.
Das Modell und die Simulationsergebnisse werden in einem Vortrag vorgestellt und in einem Bericht zusammengefasst.
Praktische Anwendungen von Synchrotronmethoden in der Biomaterialforschung
Während der Präsenzzeit werden Synchrotronmethoden an Hand aktueller Forschungsergebnisse vorgestellt. Weiterhin werden die Studierenden an Hand von Beispielen in die Erarbeitung eines eigenen fiktiven Proposals für eine Messzeit eingeführt.
Die Studierenden erarbeiten dann selbst ein Proposal; alle Proposals werden von den Studierenden als fiktive Gutachtergruppe bewertet. Die Diskussion der Gutachterentscheidung erfolgt ebenfalls in der Präsenzveranstaltung.
Requirements for participation and examination
Desirable prerequisites for participation in the courses:
Fundamental knowledge of materials science, mechanics and physics
Bachelor Degree in Materials Science, Physics or related subjects
Bachelor Degree in Materials Science, Physics or related subjects
Mandatory requirements for the module examination registration:
This module has no examination requirements.
Completion of the module
| Grading | Graded |
|---|---|
| Exam format | Portfolio examination |
| Type of portfolio examination | 100 points in total |
| Language | German |
Test elements
| Name | Points/Weight | Category | Duration/Extent |
|---|---|---|---|
| Finite element analysis of research subhect | 20 | practical | |
| Bericht Finite Elemente Analyse | 15 | written | |
| Vortrag (Mechanische Analyse durch angewandte FEM) | 15 | oral | |
| Fiktives Proposal für Synchrotronmesszeit | 30 | written | |
| Bewertung der Synhrotronproposals | 20 | flexibel |
Exam description
Mechanische Analyse durch angewandte FEM (50 Pkt.):
Teil 1 (20 Pkt.): Finite element analysis of a research subject
Teil 2 (15 Pkt.): Written report of the finite element analysis
Teil 3 (15 Pkt.): Oral presentation
Praktische Anwendungen von Synchrotronmethoden in der Biomaterialforschung (50 Pkt.):
Teil 1 (30 Pkt.): Jede/r Teilnehmer/in verfasst ein fiktives Proposal für eine Messzeit am Synchrotron.
Teil 2 (20 Pkt.): Die Teilnehmer/innen bewerten als Gutachter/innengruppe die "eingereichten" Proposal und stellen ein Ranking mit Begründung für ihre Entscheidung auf.
Teil 1 (20 Pkt.): Finite element analysis of a research subject
Teil 2 (15 Pkt.): Written report of the finite element analysis
Teil 3 (15 Pkt.): Oral presentation
Praktische Anwendungen von Synchrotronmethoden in der Biomaterialforschung (50 Pkt.):
Teil 1 (30 Pkt.): Jede/r Teilnehmer/in verfasst ein fiktives Proposal für eine Messzeit am Synchrotron.
Teil 2 (20 Pkt.): Die Teilnehmer/innen bewerten als Gutachter/innengruppe die "eingereichten" Proposal und stellen ein Ranking mit Begründung für ihre Entscheidung auf.
Duration of the module
The following number of semesters is estimated for taking and completing the module: 1 semester(s).
This module can be started in the following semesters: Winter semester.
Maximum number of participants
The maximum capacity of participants is 16.
Registration procedures
Anmeldung über die Homepage des Fachgebiets Werkstofftechnik (www.fgwtberlin.tu-berlin.de) erwünscht.
Recommended reading, lecture notes
Lecture notes
unavailable
Electronic lecture notes
unavailable
Recommended literature
- Literatur wird in den Veranstaltungen bekannt gegeben.
Assigned programs
This module is not used in any program.
Werkstoffwissenschaften, Physik, Maschinenbau
Miscellaneous
Mindestteilnehmer/innenzahl: 6
Maximale Teilnehmer/innenzahl: 16
Maximale Teilnehmer/innenzahl: 16