Modern characterisation methods of materials and structuresModule description #30679 / Version 2
- 6 CP
- Portfolio examination
- Graded
- Winter and summer semester
- German
This module description is not valid in the current semester (Winter semester 2026/27).
Current version (v4)
| Module / Version | #30679 / #2 |
|---|---|
| Validity | Summer semester 2024 – Winter semester 2024/25 |
| Available language(s) | German |
| Credit points | 6 |
| Person responsible for the module | Fleck, Claudia |
| Grading | Graded |
| Exam format | Portfolio examination |
| Language(s) of instruction | German |
Affiliation
| Faculty | Fakultät III |
|---|---|
| Institute | Institut für Werkstoffwissenschaften und -technologien |
| Academic chair | 33341100 FG Werkstofftechnik |
Contact
| Office | Not specified |
|---|---|
| Contact person | Fleck, Claudia |
| E-mail address | claudia.fleck@tu-berlin.de |
| Website | https://www.tu.berlin/fgwtberlin/ |
Learning outcomes
Mechanical analysis by applied FEM:
- Usage of the finite element tool in a material science research environment
- Analysis of the mechanics
- Basic overview of finite element material models
Practical applications of synchrotron methods in biomaterials research:
The students
- will learn about recent biomaterial research such as material properties and toxicological aspects
- get an introduction into synchrotron technology and its (unique) use for biomaterial research
- get to know how to do experiments at synchrotrons
- will learn how to analyze and interpret results of biomaterial analyses performed at synchrotrons
The course yields
20 % knowledge & understanding, 30 % analysis & methodology, 20 % information research & evaluation, 20 % application, 10 % social competence
- Usage of the finite element tool in a material science research environment
- Analysis of the mechanics
- Basic overview of finite element material models
Practical applications of synchrotron methods in biomaterials research:
The students
- will learn about recent biomaterial research such as material properties and toxicological aspects
- get an introduction into synchrotron technology and its (unique) use for biomaterial research
- get to know how to do experiments at synchrotrons
- will learn how to analyze and interpret results of biomaterial analyses performed at synchrotrons
The course yields
20 % knowledge & understanding, 30 % analysis & methodology, 20 % information research & evaluation, 20 % application, 10 % social competence
Content
Mechanical analysis by applied FEM:
(i) Practical use of a finite element software
(ii) Creation of finite element geometry based on tomography data
(iii) Application of material models in finite element
(iv) Mechanical evaluation of finite element results
Practical applications of synchrotron methods in biomaterials research:
(i) Synchrotron: Introduction into synchrotron technology
(ii) Material characterization using X-ray flouresence, XRD and nanoCT
(iii) Case studies (i): µ and nano CT to characterize (bio) materials in 3D (data may be used for further FE investigation)
(iv) How to analyze big 3D data. 3D image processing and how to characterize morphology
(v) Case studies (ii): µXRF to characterize implant materials (Mg, Ti, ceramics) and the role of nano-particles
(vi) Introduction into XRF data processing
(vii) How to do an experiment at the synchrotron: Writing a beamtime application. What are the future demands on biomaterials?
(viii) The evaluation process of synchrotron beamtime applications. & Overall summary of the course.
(i) Practical use of a finite element software
(ii) Creation of finite element geometry based on tomography data
(iii) Application of material models in finite element
(iv) Mechanical evaluation of finite element results
Practical applications of synchrotron methods in biomaterials research:
(i) Synchrotron: Introduction into synchrotron technology
(ii) Material characterization using X-ray flouresence, XRD and nanoCT
(iii) Case studies (i): µ and nano CT to characterize (bio) materials in 3D (data may be used for further FE investigation)
(iv) How to analyze big 3D data. 3D image processing and how to characterize morphology
(v) Case studies (ii): µXRF to characterize implant materials (Mg, Ti, ceramics) and the role of nano-particles
(vi) Introduction into XRF data processing
(vii) How to do an experiment at the synchrotron: Writing a beamtime application. What are the future demands on biomaterials?
(viii) The evaluation process of synchrotron beamtime applications. & Overall summary of the course.
Module components
Compulsory area
The following courses are mandatory for this module:
Workload and credit points
Mechanische Analyse durch angewandte FEM (Integrated course)
| Workload description | Multiplier | Hours | Total |
|---|---|---|---|
| Bericht und Präsentation | 1 | 30 h | 30 h |
| FEM-Modellerstellung | 1 | 40 h | 40 h |
| Präsenzzeit | 10 | 2 h | 20 h |
| 90 h | |||
Praktische Anwendungen von Synchrotronmethoden in der Biomaterialforschung (Integrated course)
| Workload description | Multiplier | Hours | Total |
|---|---|---|---|
| Attendance | 15 | 2 h | 30 h |
| Vorbereitung der Evaluation der Proposal | 1 | 30 h | 30 h |
| Vorbereitung des Proposals | 1 | 30 h | 30 h |
| 90 h | |||
The workload of the module adds up to 180 hours. The module therefore comprises 6 credit points.
Description of teaching and learning methods
Mechanical analysis by applied FEM:
In the presence time the basics of FEM are presented and the students are introduced to the used FEM software (currently Abaqus, changes possible).
In the part "FEM-model design" the students create a finite element model in free time assignment. The lecturer is available in case of problems. The model and the simulation results are presented in a talk and summarised in a report.
Practical applications of synchrotron methods in biomaterials research:
During the presence time synchrotron methods are introduced by means of current research results. Further examples of beamtime proposals are given to guide the students in writing their own fictive proposals. The students then write their proposals, and all proposals are evaluated by the students, forming a fictive reviewer group. The review decision is then also discussed in the forum.
In the presence time the basics of FEM are presented and the students are introduced to the used FEM software (currently Abaqus, changes possible).
In the part "FEM-model design" the students create a finite element model in free time assignment. The lecturer is available in case of problems. The model and the simulation results are presented in a talk and summarised in a report.
Practical applications of synchrotron methods in biomaterials research:
During the presence time synchrotron methods are introduced by means of current research results. Further examples of beamtime proposals are given to guide the students in writing their own fictive proposals. The students then write their proposals, and all proposals are evaluated by the students, forming a fictive reviewer group. The review decision is then also discussed in the forum.
Requirements for participation and examination
Desirable prerequisites for participation in the courses:
Fundamental knowledge of materials science, mechanics and physics
Bachelor Degree in Materials Science, Physics or related subjects
Bachelor Degree in Materials Science, Physics or related subjects
Mandatory requirements for the module examination registration:
This module has no examination requirements.
Completion of the module
| Grading | Graded |
|---|---|
| Exam format | Portfolio examination |
| Type of portfolio examination | 100 points in total |
| Language | German |
Test elements
| Name | Points/Weight | Category | Duration/Extent |
|---|---|---|---|
| Finite element analysis of research subhect | 20 | practical | |
| Bericht Finite Elemente Analyse | 15 | written | |
| Vortrag (Mechanische Analyse durch angewandte FEM) | 15 | oral | |
| Fiktives Proposal für Synchrotronmesszeit | 30 | written | |
| Bewertung der Synhrotronproposals | 20 | flexibel |
Exam description
Mechanical analysis in applied FEM (50 pts.)
part 1 (20 pts.): Finite element analysis of a research subject
part 2 (15 pts.): Written report of the finite element analysis
part 3 (15 pts.): Oral presentation
Practical application of synchrotron methods in biomaterials research (50 Pkt.):
part 1 (30 pts.): each participant writes a fictive proposal for a beamtime at a synchrotron
part 2 (20 pts.): the participants act as reviewer group, evaluate the "submitted" proposals and rank them with explanation of their decision
part 1 (20 pts.): Finite element analysis of a research subject
part 2 (15 pts.): Written report of the finite element analysis
part 3 (15 pts.): Oral presentation
Practical application of synchrotron methods in biomaterials research (50 Pkt.):
part 1 (30 pts.): each participant writes a fictive proposal for a beamtime at a synchrotron
part 2 (20 pts.): the participants act as reviewer group, evaluate the "submitted" proposals and rank them with explanation of their decision
Duration of the module
The following number of semesters is estimated for taking and completing the module: 1 semester(s).
This module can be started in the following semesters: Winter and summer semester.
Maximum number of participants
The maximum capacity of participants is 16.
Registration procedures
Registration via the webpage of the department is asked for.
Recommended reading, lecture notes
Lecture notes
unavailable
Electronic lecture notes
unavailable
Recommended literature
- Literature is given in the IVs.
- Literatur wird in den Veranstaltungen bekannt gegeben.
Assigned programs
This module is not used in any program.
Materials science, physics, mechanical engineering
Miscellaneous
Not specified