Skip to content
Technische Universität Berlin Deutsch
Course catalog and module transfer system

Modern characterisation methods of materials and structuresModule description #30679 / Version 3

← Module page Deutsche Fassung
This module description is not valid in the current semester (Winter semester 2026/27). Current version (v4)
Module / Version#30679 / #3
ValiditySummer semester 2025 – Winter semester 2025/26
Available language(s)German
Credit points6
Person responsible for the moduleFleck, Claudia
GradingGraded
Exam formatPortfolio examination
Language(s) of instructionGerman

Affiliation

FacultyFakultät III
InstituteInstitut für Werkstoffwissenschaften und -technologien
Academic chair33341100 FG Werkstofftechnik

Contact

OfficeNot specified
Contact personFleck, Claudia
E-mail addressclaudia.fleck@tu-berlin.de
Websitehttps://www.tu.berlin/fgwtberlin/

Learning outcomes

Mechanical analysis by applied FEM:
- Usage of the finite element tool in a material science research environment
- Analysis of the mechanics
- Basic overview of finite element material models

Practical applications of synchrotron methods in biomaterials research:
The students
- will learn about recent biomaterial research such as material properties and toxicological aspects
- get an introduction into synchrotron technology and its (unique) use for biomaterial research
- get to know how to do experiments at synchrotrons
- will learn how to analyze and interpret results of biomaterial analyses performed at synchrotrons

The course yields
20 % knowledge & understanding, 30 % analysis & methodology, 20 % information research & evaluation, 20 % application, 10 % social competence

Content

Mechanical analysis by applied FEM:

(i) Practical use of a finite element software
(ii) Creation of finite element geometry based on tomography data
(iii) Application of material models in finite element
(iv) Mechanical evaluation of finite element results

Practical applications of synchrotron methods in biomaterials research:

(i) Synchrotron: Introduction into synchrotron technology
(ii) Material characterization using X-ray flouresence, XRD and nanoCT
(iii) Case studies (i): µ and nano CT to characterize (bio) materials in 3D (data may be used for further FE investigation)
(iv) How to analyze big 3D data. 3D image processing and how to characterize morphology
(v) Case studies (ii): µXRF to characterize implant materials (Mg, Ti, ceramics) and the role of nano-particles
(vi) Introduction into XRF data processing
(vii) How to do an experiment at the synchrotron: Writing a beamtime application. What are the future demands on biomaterials?
(viii) The evaluation process of synchrotron beamtime applications. & Overall summary of the course.

Module components

Compulsory area

The following courses are mandatory for this module:

CoursesTypeNumberFrequencyLanguageHours per weekCourse catalog
Mechanische Analyse durch angewandte FEMIntegrated course Winter and summer semester–2 ISIS
Praktische Anwendungen von Synchrotronmethoden in der BiomaterialforschungIntegrated course Winter and summer semester–2 ISIS

Workload and credit points

Mechanische Analyse durch angewandte FEM (Integrated course)

Workload descriptionMultiplierHoursTotal
report and presentation130 h30 h
FEM model creation140 h40 h
Attendance102 h20 h
90 h

Praktische Anwendungen von Synchrotronmethoden in der Biomaterialforschung (Integrated course)

Workload descriptionMultiplierHoursTotal
Attendance152 h30 h
preparation for evaluation of the proposal130 h30 h
preparation of the proposal130 h30 h
90 h

The workload of the module adds up to 180 hours. The module therefore comprises 6 credit points.

Description of teaching and learning methods

Mechanical analysis by applied FEM:
In the presence time the basics of FEM are presented and the students are introduced to the used FEM software (currently Abaqus, changes possible).
In the part "FEM-model design" the students create a finite element model in free time assignment. The lecturer is available in case of problems. The model and the simulation results are presented in a talk and summarised in a report.

Practical applications of synchrotron methods in biomaterials research:
During the presence time synchrotron methods are introduced by means of current research results. Further examples of beamtime proposals are given to guide the students in writing their own fictive proposals. The students then write their proposals, and all proposals are evaluated by the students, forming a fictive reviewer group. The review decision is then also discussed in the forum.

Requirements for participation and examination

Desirable prerequisites for participation in the courses:

Fundamental knowledge of materials science, mechanics and physics
Bachelor Degree in Materials Science, Physics or related subjects

Mandatory requirements for the module examination registration:

This module has no examination requirements.

Completion of the module

GradingGraded
Exam formatPortfolio examination
Type of portfolio examination100 points in total
LanguageEnglish, German

Test elements

NamePoints/WeightCategoryDuration/Extent
Finite element analysis of research subject10practical20-30 Stunden
Bericht Finite Elemente Analyse25writtenca: 10 Seiten
Vortrag (Mechanische Analyse durch angewandte FEM)15oral15 min
Fiktives Proposal für Synchrotronmesszeit30writtenca: 10 Seiten
Bewertung der Synhrotronproposals20flexibelca: 5 Seiten

Exam description

Mechanical analysis in applied FEM (50 pts.)

part 1 (20 pts.): Finite element analysis of a research subject
part 2 (15 pts.): Written report of the finite element analysis
part 3 (15 pts.): Oral presentation


Practical application of synchrotron methods in biomaterials research (50 Pkt.):

part 1 (30 pts.): each participant writes a fictive proposal for a beamtime at a synchrotron
part 2 (20 pts.): the participants act as reviewer group, evaluate the "submitted" proposals and rank them with explanation of their decision

Duration of the module

The following number of semesters is estimated for taking and completing the module: 2 semester(s).

This module can be started in the following semesters: Winter and summer semester.

Maximum number of participants

The maximum capacity of participants is 16.

Registration procedures

Registration via the webpage of the department is asked for.

Recommended reading, lecture notes

Lecture notes

unavailable

Electronic lecture notes

unavailable

Recommended literature

  • Literature is given in the IVs.
  • Literatur wird in den Veranstaltungen bekannt gegeben.

Assigned programs

This module version is used in the following programs:

Program / program versionSemester(s)Curriculum component
Material Science and Engineering
StuPO 2009
SS 2025Vertiefungsmodule
WS 2025/26Vertiefungsmodule
Material Science and Engineering
Material Science and Engineering (M. Sc.) - StuPO 2024
SS 2025Fachzspezifische Wahlpflicht › Natur- und ingenieurwissenschaftliche Aspekte der Materialwissenschaft und Werkstofftechnik › FG Werkstofftechnik
WS 2025/26Fachzspezifische Wahlpflicht › Natur- und ingenieurwissenschaftliche Aspekte der Materialwissenschaft und Werkstofftechnik › FG Werkstofftechnik
Materials science, physics, mechanical engineering

Miscellaneous

Not specified