Skip to content
Technische Universität Berlin Deutsch
Course catalog and module transfer system

Environmental Science and Analytical Fundamentals of Water Quality EngineeringModule description #30712 / Version 5

← Module page Deutsche Fassung
This module description is not valid in the current semester (Winter semester 2026/27). Current version (v7)
Module / Version#30712 / #5
ValidityWinter semester 2020/21 – Summer semester 2025
Available language(s)German
Credit points12
Person responsible for the moduleHellweger, Ferdinand Leberecht
GradingGraded
Exam formatPortfolio examination
Language(s) of instructionGerman

Affiliation

FacultyFakultät III
InstituteInstitut für Technischen Umweltschutz
Academic chair33331300 FG Wasserreinhaltung

Contact

OfficeKF 4
Contact personPutschew, Anke
E-mail addressferdi.hellweger@tu-berlin.de
Websitehttp://www.itu.tu-berlin.de

Learning outcomes

Measurement methods in water quality engineering

The students will be knowledgeable about the most important and fundamental analytical methods to quantify the physical, chemical and biochemical properties and processes in water and during water - and wastewater treatment, can independently apply them documentat results and estimate the limits of applied analytical methods.

The course entails
40% knowledge and understanding,
20% development and design,
20% research and evaluation,
20% practical application.

Water Quality

The students have advanced knowledge about the basic environmental science processes relevant to water quality engineering, and understand the physical, chemical and biological processes in natural waters, drinking water and wastewater treatment, and master the methodology for chemical calculations and application of the software “MINEQL”.

The course entails
40% knowledge and understanding,
20% development and design,
20% research and evaluation,
20% practical application.

Content

Measurement methods in water quality engineering

-Sampling and sample preparation, particulat and dissolved constituents, single compounds analysis and group parameters, inorganic compound: photometry, electrochemical methods, ion chromatography, organic compounds: TOC/DOC, BOD, COD;chromatography, mass spectrometry, biological parameters: E. coli, cyanobacteria

Water Quailty

In depth treatment of physical, chemical and biological processes in natural waters, in wastewater and drinking water treatment, quantitative description, kinetics, application.

Module components

Compulsory area

The following courses are mandatory for this module:

CoursesTypeNumberFrequencyLanguageHours per weekCourse catalog
Messtechnik der WasserreinhaltungInternship0333 L 601 Summer semester[de]2 ISIS
Messtechnik der WasserreinhaltungIntegrated course0333 L 602 Winter semester[de]2 ISIS
WasserqualitätExercise0333 L 661 Winter semester[de]2 ISIS
WasserqualitätIntegrated course0333 L 660 Winter semester[de]2 ISIS

Courses in the course catalog

Courses created from the teaching units of this module.

Winter semester 2026/27 (4)

Messtechnik der Wasserreinhaltung (Internship) 1

All groups of this course in the catalog

Messtechnik der Wasserreinhaltung (Integrated course) 1

All groups of this course in the catalog

Wasserqualität (Exercise) 1

All groups of this course in the catalog

Wasserqualität (Integrated course) 1

All groups of this course in the catalog

Workload and credit points

Messtechnik der Wasserreinhaltung (Internship)

Workload descriptionMultiplierHoursTotal
Attendance152 h30 h
Vor-/Nachbereitung153 h45 h
75 h

Messtechnik der Wasserreinhaltung (Integrated course)

Workload descriptionMultiplierHoursTotal
Attendance152 h30 h
Vor-/Nachbereitung152 h30 h
60 h

Wasserqualität (Exercise)

Workload descriptionMultiplierHoursTotal
Attendance152 h30 h
Vor-/Nachbereitung153 h45 h
75 h

Wasserqualität (Integrated course)

Workload descriptionMultiplierHoursTotal
Attendance152 h30 h
Vor-/Nachbereitung152 h30 h
60 h

Course-independent workload

Workload descriptionMultiplierHoursTotal
Prüfungsvorbereitung190 h90 h
90 h

The workload of the module adds up to 360 hours. The module therefore comprises 12 credit points.

Description of teaching and learning methods

Measurement methods in water quality engineering

The course includes integrated lecturing and a practical lab part. The lab part includes an introduction followed by independent hands-on work in small groups.

Water Quality

The course includes integrated lecturing (IV) and exercise session. In the exercise session students work in small groups, under supervision or independently with the software program “MINEQL”, to gain in-depth knowledge and practical application of the material.

Requirements for participation and examination

Desirable prerequisites for participation in the courses:

This module has no desirable prerequisites for the courses.

Mandatory requirements for the module examination registration:

This module has no examination requirements.

Completion of the module

GradingGraded
Exam formatPortfolio examination
Type of portfolio examination100 points in total
LanguageGerman

Test elements

NamePoints/WeightCategoryDuration/Extent
MT: Protokolle der durchgeführten Messungen und Versuche25written30 Seiten
MT: Schriftliche Prüfung25written90 Min.
WQ: Hausaufgaben12writtenca. 10 Hausaufgaben
WQ: Mündliche Rücksprache über Inhalt der VL13written90 Min.
WQ: Schriftliche Prüfung25written90 MIN.

Exam description

Each part will be graded individually using a grading rubric and can have a maximum of 100 points. The points will be weighted based on
the following and then added.

Duration of the module

The following number of semesters is estimated for taking and completing the module: 1 semester(s).

This module can be started in the following semesters: Winter and summer semester.

Maximum number of participants

This module is not limited to a number of students.

Registration procedures

The registration of the exams done via the Prüfungsamt

Recommended reading, lecture notes

Lecture notes

unavailable

Electronic lecture notes

unavailable

Recommended literature

  • MT: Georg Schwedt, Analytische Chemie, Grundlagen, Methoden und Praxis. Georg Thieme Verlag Stuttart
  • MT: H. Hein und W. Kunze, Umweltanalytik mit Spektrometrie und Chromatographie. Wiley-VCH
  • MT: Sigg, L. & Stumm, W. (1996): Aquatische Chemie - eine Einführung in die Chemie wässriger Lösungen und natürlicher Gewässer. Zürich: vdf, Hochschulverl. an der ETH Zürich, Zürich [u.a.].
  • MT: Sontheimer, H., Spindler, P. & Rohmann, U. (1980): Wasserchemie für Ingenieure. ZfGW-Verlag, Frankfurt.
  • WQ: Sigg, L. & Stumm, W. (2011): Aquatische Chemie - Einführung in die Chemie natürlicher Gewäs- ser. 5. Auflage. vdf Hochschulverlag an der ETH Zürich,. Zürich.
  • WQ: Sontheimer, H., Spindler, P. & Rohmann, U. (1980): Wasserchemie für Ingenieure. ZfGW-Verlag, Frankfurt.

Assigned programs

This module version is used in the following programs:

Program / program versionSemester(s)Curriculum component
Environmental Science and Technology
StuPO 2014
SS 2025Schwerpunktbereich

Miscellaneous

Not specified