Introduction to Process Engineering using basic experiments - short courseModule description #30714 / Version 7
- 2 CP
- Portfolio examination
- Graded
- Winter semester
- German
This module description is not valid in the current semester (Winter semester 2026/27).
Current version (v8)
| Module / Version | #30714 / #7 |
|---|---|
| Validity | Summer semester 2025 – Winter semester 2025/26 |
| Available language(s) | German |
| Credit points | 2 |
| Person responsible for the module | Kraume, Matthias |
| Grading | Graded |
| Exam format | Portfolio examination |
| Language(s) of instruction | German |
Affiliation
| Faculty | Fakultät III |
|---|---|
| Institute | Institut für Prozess und Verfahrenstechnik |
| Academic chair | 33351300 FG Verfahrenstechnik |
Contact
| Office | ACK 7 |
|---|---|
| Contact person | Böhm, Lutz |
| E-mail address | sekretariat@vt.tu-berlin.de |
| Website | https://www.tu.berlin/verfahrenstechnik |
Learning outcomes
The students should
- know the basic and typical tasks of chemical and process engineering
- be able to plan and carry out experiments, interpret the experimental results and draw appropriate conclusions,
- be able to compare the results with known physical laws.
- understand aspects essential to laboratory work, such as care in carrying out experiments, error analysis and safety measures.
- work in small groups
The course provides
20% knowledge & understanding, 20% analysis & methodology, 20% research & evaluation
30% application & practice, 10% social skills
- know the basic and typical tasks of chemical and process engineering
- be able to plan and carry out experiments, interpret the experimental results and draw appropriate conclusions,
- be able to compare the results with known physical laws.
- understand aspects essential to laboratory work, such as care in carrying out experiments, error analysis and safety measures.
- work in small groups
The course provides
20% knowledge & understanding, 20% analysis & methodology, 20% research & evaluation
30% application & practice, 10% social skills
Content
Basic experiments such as
-Viscosity measurements
-Interfacial tension measurements
-Stirring experiments
-Determination of residence time
Simple, universally applicable standard measurement techniques are used on elementary experimental equipment.
-Viscosity measurements
-Interfacial tension measurements
-Stirring experiments
-Determination of residence time
Simple, universally applicable standard measurement techniques are used on elementary experimental equipment.
Module components
Compulsory area
The following courses are mandatory for this module:
| Courses | Type | Number | Frequency | Language | Hours per week | Course catalog |
|---|---|---|---|---|---|---|
| Einführung in die Verfahrenstechnik anhand grundlegender Experimente | Internship | 0331 L 023 | Winter semester | [de] | 2 | ISIS |
Workload and credit points
Einführung in die Verfahrenstechnik anhand grundlegender Experimente (Internship)
| Workload description | Multiplier | Hours | Total |
|---|---|---|---|
| Attendance time | 1 | 40 h | 40 h |
| Preaparation and follow-up | 1 | 20 h | 20 h |
| 60 h | |||
The workload of the module adds up to 60 hours. The module therefore comprises 2 credit points.
Description of teaching and learning methods
The laboratory work is carried out in small groups, where the evaluation and recording of experiments and the comparison with mathematical models are carried out independently.
The experimental facilities are located in the department's technical hall.
PCs with appropriate software are available for the evaluation of the experimental data.
Location of the course: Laboratory of the department at Ackerstr. 76
The experimental facilities are located in the department's technical hall.
PCs with appropriate software are available for the evaluation of the experimental data.
Location of the course: Laboratory of the department at Ackerstr. 76
Requirements for participation and examination
Desirable prerequisites for participation in the courses:
Basic knowledge of physics and chemistry.
Mandatory requirements for the module examination registration:
This module has no examination requirements.
Completion of the module
| Grading | Graded |
|---|---|
| Exam format | Portfolio examination |
| Type of portfolio examination | 100 points in total |
| Language | English, German |
Test elements
| Name | Points/Weight | Category | Duration/Extent |
|---|---|---|---|
| Basics and knowledge test for the test setup | 10 | oral | app. 15 Min. |
| Recorded practical performance (report) | 75 | written | 30-50 pages per group |
| Test preparation and implementation | 15 | practical | Ongoing during attendance time |
Exam description
Grading according to scheme 1 of Fak. III, Pass 2/3, see appendix to module catalogue
Duration of the module
The following number of semesters is estimated for taking and completing the module: 1 semester(s).
This module can be started in the following semesters: Winter semester.
Maximum number of participants
The maximum capacity of participants is 18.
Registration procedures
IMPORTANT for the planning of the lab course in the department
The initial registration for the lab course takes place online via a list of participants on the ISIS platform:
Procedure:
1) Pre-registration list provided by the department via ISIS at the beginning of the semester.
2) Those interested in the course register with full details.
Students register for the portfolio examination online via MTS (Moses account).
1) Provision of the registration under the module number in the MTS by the department.
2) Those interested in the course register with full details including email.
3) If there are more than 18 registered students, Par. 48 sec. 3 of the General Study and Examination Regulations is applicable.
4) Those who are not accepted will be informed and will be removed from the MTS.
The registration procedure is subject to the deadlines and dates set by the department.
For further information, please consult Website : www.tu.berlin/verfahrenstechnik
The initial registration for the lab course takes place online via a list of participants on the ISIS platform:
Procedure:
1) Pre-registration list provided by the department via ISIS at the beginning of the semester.
2) Those interested in the course register with full details.
Students register for the portfolio examination online via MTS (Moses account).
1) Provision of the registration under the module number in the MTS by the department.
2) Those interested in the course register with full details including email.
3) If there are more than 18 registered students, Par. 48 sec. 3 of the General Study and Examination Regulations is applicable.
4) Those who are not accepted will be informed and will be removed from the MTS.
The registration procedure is subject to the deadlines and dates set by the department.
For further information, please consult Website : www.tu.berlin/verfahrenstechnik
Recommended reading, lecture notes
Lecture notes
unavailable
Electronic lecture notes
available – will be made available to the participants
Recommended literature
No recommended literature given
Assigned programs
This module version is used in the following programs:
| Program / program version | Semester(s) | Curriculum component |
|---|---|---|
| Energy Engineering and Process Engineering StuPO 2014 | SS 2025 | EPT Wahlpflichtlabor |
| WS 2025/26 | EPT Wahlpflichtlabor |
Miscellaneous
Not specified