From raw material to component: Basics of manufacturing and processing the materialsModule description #30951 / Version 2
- 6 CP
- Portfolio examination
- Graded
- Winter semester
- German
| Module / Version | #30951 / #2 |
|---|---|
| Validity | Since Winter semester 2024/25 |
| Available language(s) | German |
| Credit points | 6 |
| Person responsible for the module | Görke, Oliver |
| Grading | Graded |
| Exam format | Portfolio examination |
| Language(s) of instruction | German |
Affiliation
| Faculty | Fakultät III |
|---|---|
| Institute | Institut für Werkstoffwissenschaften und -technologien |
| Academic chair | 33341300 FG Keramische Werkstoffe |
Contact
| Office | BA 3 |
|---|---|
| Contact person | Gurlo, Aleksander |
| E-mail address | o.goerke@tu-berlin.de |
| Website | http://www.keramik.tu-berlin.de/ |
Learning outcomes
Fundamentals of cross-material production, processing and technology of all material classes (ceramics, metals, polymers)
The course teaches:
40 % knowledge & understanding
20 % analysis & methodology
20 % application & practice
20 % social competence
The course teaches:
40 % knowledge & understanding
20 % analysis & methodology
20 % application & practice
20 % social competence
Content
From raw material to component: the basics of manufacturing and processing materials
The materials cycle: from raw material to disposal. Recycling. Process and processing steps. Primary moulding, forming, additive and subtractive processing. Processing / process technology starting from the melt, from the suspension / dispersion. Powder technology: Preparation of raw materials/powders. Crushing. Grinding. Separating. Sieving. Classifying. Mixing. Granulating. Moulding. Drying. Firing. Debinding. Kiln technology. Sintering: mechanisms (solid, liquid, reactive). Finishing.
Fundamentals of rheology
Flow behavior of materials and multiphase material mixtures: Flow models/laws/simulation for pure materials as well as composites, influence of temperature and pressure as well as diluents and fillers, flow and solidification behavior of common melts from polymers, metals and glasses as well as composites and pastes (slurries), effects of flow instabilities such as droplet and thread breakage, turbulence and wall slip, rheometry and applied fluid mechanics: visco-elasticity and plasticity, thixotropy and rheopexy, dimensionless numbers, 3D stress and deformation tensors, normal and residual stresses, simple capillary and plate flows, complex flow forms, drag and pressure flow, injection molding, fibre and film extrusion, pressure loss and drag reduction.
Fundamentals of manufacturing and processing - practical course in materials science IV
Application of extrusion for three material classes (metals, polymers, ceramics).
The materials cycle: from raw material to disposal. Recycling. Process and processing steps. Primary moulding, forming, additive and subtractive processing. Processing / process technology starting from the melt, from the suspension / dispersion. Powder technology: Preparation of raw materials/powders. Crushing. Grinding. Separating. Sieving. Classifying. Mixing. Granulating. Moulding. Drying. Firing. Debinding. Kiln technology. Sintering: mechanisms (solid, liquid, reactive). Finishing.
Fundamentals of rheology
Flow behavior of materials and multiphase material mixtures: Flow models/laws/simulation for pure materials as well as composites, influence of temperature and pressure as well as diluents and fillers, flow and solidification behavior of common melts from polymers, metals and glasses as well as composites and pastes (slurries), effects of flow instabilities such as droplet and thread breakage, turbulence and wall slip, rheometry and applied fluid mechanics: visco-elasticity and plasticity, thixotropy and rheopexy, dimensionless numbers, 3D stress and deformation tensors, normal and residual stresses, simple capillary and plate flows, complex flow forms, drag and pressure flow, injection molding, fibre and film extrusion, pressure loss and drag reduction.
Fundamentals of manufacturing and processing - practical course in materials science IV
Application of extrusion for three material classes (metals, polymers, ceramics).
Module components
Compulsory area
The following courses are mandatory for this module:
| Courses | Type | Number | Frequency | Language | Hours per week | Course catalog |
|---|---|---|---|---|---|---|
| Vom Rohstoff zum Bauteil: Grundlagen der Fertigung und Verarbeitung der Werkstoffe | Integrated course | Winter semester | [de] | 2 | WS 2026/27 (2) ISIS | |
| Grundlagen der Rheologie | Integrated course | Winter semester | [de] | 2 | ISIS | |
| Grundlagen der Fertigung und Verarbeitung | Internship | Winter semester | [de] | 2 | WS 2026/27 (1) ISIS |
Courses in the course catalog
Courses created from the teaching units of this module.
Winter semester 2026/27 (3)
Vom Rohstoff zum Bauteil: Grundlagen der Fertigung und Verarbeitung der Werkstoffe (Integrated course) 2
Grundlagen der Fertigung und Verarbeitung (Internship) 1
- Grundlagen der Fertigung und Verarbeitung (Praktikum) 1. Termingruppe
Workload and credit points
Vom Rohstoff zum Bauteil: Grundlagen der Fertigung und Verarbeitung der Werkstoffe (Integrated course)
| Workload description | Multiplier | Hours | Total |
|---|---|---|---|
| Attendance | 15 | 2 h | 30 h |
| Pre/post processing | 15 | 2 h | 30 h |
| 60 h | |||
Grundlagen der Rheologie (Integrated course)
| Workload description | Multiplier | Hours | Total |
|---|---|---|---|
| Attendance | 15 | 2 h | 30 h |
| Pre/post processing | 15 | 2 h | 30 h |
| 60 h | |||
Grundlagen der Fertigung und Verarbeitung (Internship)
| Workload description | Multiplier | Hours | Total |
|---|---|---|---|
| Präsenzzeit | 3 | 5 h | 15 h |
| Vor-/Nachbereitung | 3 | 5 h | 15 h |
| 30 h | |||
Course-independent workload
| Workload description | Multiplier | Hours | Total |
|---|---|---|---|
| Prüfungsvorbereitung | 1 | 30 h | 30 h |
| 30 h | |||
The workload of the module adds up to 180 hours. The module therefore comprises 6 credit points.
Description of teaching and learning methods
Integrierte Veranstaltung (Vorlesung, Übung, Seminar) und Praktikum
Requirements for participation and examination
Desirable prerequisites for participation in the courses:
This module has no desirable prerequisites for the courses.
Mandatory requirements for the module examination registration:
This module has no examination requirements.
Completion of the module
| Grading | Graded |
|---|---|
| Exam format | Portfolio examination |
| Type of portfolio examination | 100 points in total |
| Language | German |
Test elements
| Name | Points/Weight | Category | Duration/Extent |
|---|---|---|---|
| Mündliche Rücksprache zum Praktikum | 15 | oral | 20 min |
| Protokollierte praktische Leistung | 35 | written | |
| Written test on process technology | 15 | written | 60 min |
| written test on rheology | 35 | written | 60 min |
Duration of the module
The following number of semesters is estimated for taking and completing the module: 1 semester(s).
This module can be started in the following semesters: Winter semester.
Maximum number of participants
This module is not limited to a number of students.
Registration procedures
Registration for the examination takes place in accordance with the current version of the AllgStuPO.
Registration for the examination takes place online via Moses or QISPOS.
Registration for the examination takes place online via Moses or QISPOS.
Recommended reading, lecture notes
Lecture notes
unavailable
Electronic lecture notes
available – Documents and data will be provided via ISIS.
Recommended literature
- S. Francis, Materials Processing
Assigned programs
This module version is used in the following programs:
| Program / program version | Semester(s) | Curriculum component |
|---|---|---|
| Materialwissenschaft und Werkstofftechnik StuPO 2022 | SS 2025 | Fachspezifische Grundlagen |
| WS 2025/26 | Fachspezifische Grundlagen | |
| SS 2026 | Fachspezifische Grundlagen | |
| WS 2026/27 | Fachspezifische Grundlagen |
Miscellaneous
Not specified