Polymer TechnologyModule description #30958 / Version 2
- 6 CP
- Portfolio examination
- Graded
- Winter semester
- German
| Module / Version | #30958 / #2 |
|---|---|
| Validity | Since Winter semester 2026/27 |
| Available language(s) | German |
| Credit points | 6 |
| Person responsible for the module | Auhl, Dietmar Werner |
| Grading | Graded |
| Exam format | Portfolio examination |
| Language(s) of instruction | German |
Affiliation
| Faculty | Fakultät III |
|---|---|
| Institute | Institut für Werkstoffwissenschaften und -technologien |
| Academic chair | 33341400 FG Polymerwerkstoffe und -technologien |
Contact
| Office | PTK |
|---|---|
| Contact person | Rohnstock, Falk |
| E-mail address | f.rohnstock@tu-berlin.de |
| Website | https://www.tu.berlin/ptk |
Learning outcomes
Students should:
- acquire a basic understanding of the key polymer materials, their structure and their applications in various markets, and be able to apply this knowledge in practice,
- acquire a fundamental understanding of the main processing technologies used for polymers,
- possess practical and methodological skills to plan and oversee the use of materials,
- master the methodological knowledge of the technologies to be able to apply a process in a targeted manner,
- master and improve communication, cooperation and working techniques that enable independent work and collaboration in interdisciplinary groups.
The course covers:
40% Knowledge & Understanding
40% Application & Practice
5% Development & Design
5% Research & Evaluation
10% Interpersonal Skills
- acquire a basic understanding of the key polymer materials, their structure and their applications in various markets, and be able to apply this knowledge in practice,
- acquire a fundamental understanding of the main processing technologies used for polymers,
- possess practical and methodological skills to plan and oversee the use of materials,
- master the methodological knowledge of the technologies to be able to apply a process in a targeted manner,
- master and improve communication, cooperation and working techniques that enable independent work and collaboration in interdisciplinary groups.
The course covers:
40% Knowledge & Understanding
40% Application & Practice
5% Development & Design
5% Research & Evaluation
10% Interpersonal Skills
Content
- Basic properties of polymers
- Introduction to plastics processing
- Fundamentals of extrusion
- Fundamentals of injection moulding
- Fundamentals of thermoforming
- Fundamentals of additive manufacturing
- Fundamentals of advanced plastics processing techniques
- Fundamentals of joining processes for plastic parts
- Introduction to plastics testing/quality control
Many of the processing techniques presented will be demonstrated and tried out during the practical part of the course.
- Introduction to plastics processing
- Fundamentals of extrusion
- Fundamentals of injection moulding
- Fundamentals of thermoforming
- Fundamentals of additive manufacturing
- Fundamentals of advanced plastics processing techniques
- Fundamentals of joining processes for plastic parts
- Introduction to plastics testing/quality control
Many of the processing techniques presented will be demonstrated and tried out during the practical part of the course.
Module components
Compulsory area
The following courses are mandatory for this module:
| Courses | Type | Number | Frequency | Language | Hours per week | Course catalog |
|---|---|---|---|---|---|---|
| Technologie der Polymere | Internship | Winter semester | [de] | 4 | WS 2026/27 (2) ISIS | |
| Technologie der Polymere | Integrated course | Winter semester | [de] | 2 | WS 2026/27 (1) ISIS |
Courses in the course catalog
Courses created from the teaching units of this module.
Winter semester 2026/27 (3)
Technologie der Polymere (Internship) 2
- Technologie der Polymere (Praktikum) 1. Sicherheitsunterweisung
- Technologie der Polymere (Praktikum) 2. Praktika und Demonstrationen
Technologie der Polymere (Integrated course) 1
- Technologie der Polymere (Integrierte Veranstaltung) 1. Termingruppe
Workload and credit points
Technologie der Polymere (Internship)
| Workload description | Multiplier | Hours | Total |
|---|---|---|---|
| Attendance | 14 | 3 h | 42 h |
| Preparation, follow-up and report writing | 14 | 2 h | 28 h |
| Preparation for the final examination | 1 | 10 h | 10 h |
| 80 h | |||
Technologie der Polymere (Integrated course)
| Workload description | Multiplier | Hours | Total |
|---|---|---|---|
| Attendance | 15 | 2 h | 30 h |
| Pre/post processing | 15 | 2 h | 30 h |
| Preparation for the final examination | 1 | 40 h | 40 h |
| 100 h | |||
The workload of the module adds up to 180 hours. The module therefore comprises 6 credit points.
Description of teaching and learning methods
Weekly lectures with presentation slides.
The practical component includes demonstrations on standard processing machinery and, in some cases, work in small groups. Supervision is provided by academic and student staff. Practical experiments (some with a written report): polymer identification, melt flow rate (MFR), extrusion, injection moulding, film blowing, FFF 3D printing, thermoforming, mechanical testing of polymers, etc.
The practical component includes demonstrations on standard processing machinery and, in some cases, work in small groups. Supervision is provided by academic and student staff. Practical experiments (some with a written report): polymer identification, melt flow rate (MFR), extrusion, injection moulding, film blowing, FFF 3D printing, thermoforming, mechanical testing of polymers, etc.
Requirements for participation and examination
Desirable prerequisites for participation in the courses:
This module has no desirable prerequisites for the courses.
Mandatory requirements for the module examination registration:
This module has no examination requirements.
Completion of the module
| Grading | Graded |
|---|---|
| Exam format | Portfolio examination |
| Type of portfolio examination | 100 points in total |
| Language | English, German |
Test elements
| Name | Points/Weight | Category | Duration/Extent |
|---|---|---|---|
| Recorded practical work (reports) | 25 | written | 2 reports of 5 and 10 pages respectively |
| Discussion on the demonstrations, practical work and reports | 25 | flexibel | 20 min |
| Final examination | 50 | written | 60 min |
Exam description
The final examination covers the content of the lecture. Exam topics will be announced in advance to help students prepare.
The discussion on the practical sessions and reports involves summarising the content of the practical work, such as key findings, and the results of the reports submitted.
To take part in the discussion on the practical part, one must have successfully completed the practical part and submitted all reports.
The discussion on the practical sessions and reports involves summarising the content of the practical work, such as key findings, and the results of the reports submitted.
To take part in the discussion on the practical part, one must have successfully completed the practical part and submitted all reports.
Duration of the module
The following number of semesters is estimated for taking and completing the module: 1 semester(s).
This module can be started in the following semesters: Winter semester.
Maximum number of participants
This module is not limited to a number of students.
Registration procedures
Registration for the examination is subject to the current version of the AllgStuPO.
Registration for the examination is carried out online via QISPOS.
Registration for the examination is carried out online via QISPOS.
Recommended reading, lecture notes
Lecture notes
unavailable
Electronic lecture notes
available – Lecture notes are available in electronic format on ISIS
Recommended literature
- "Kunststofftechnik - Einführung und Grundlagen" (Bonten, 3. Auflage)
- "Users Guide to Plastic - A handbook for everyone" (Ulf Bruder)
- „Kunststoff-Wissen für Einsteiger“ (Abts, 2020)
- „Saechtling Kunststoff Taschenbuch“ (31. Ausgabe)
Assigned programs
This module version is used in the following programs:
| Program / program version | Semester(s) | Curriculum component |
|---|---|---|
| Materialwissenschaft und Werkstofftechnik StuPO 2022 | WS 2026/27 | Fachspezifische Grundlagen |
| Mechanical Engineering StuPO 2017 | WS 2026/27 | Wahlpflichtmodule › Schwerpunktmodule › Methodenorientierung › Werkstoffauswahl und Verarbeitung |
Miscellaneous
Not specified