Biomedical materials and technologiesModule description #30981 / Version 2
- 6 CP
- Portfolio examination
- Graded
- Summer semester
- German
| Module / Version | #30981 / #2 |
|---|---|
| Validity | Since Summer semester 2026 |
| Available language(s) | English, German |
| Credit points | 6 |
| Person responsible for the module | Auhl, Dietmar Werner |
| Grading | Graded |
| Exam format | Portfolio examination |
| Language(s) of instruction | German |
Affiliation
| Faculty | Fakultät III |
|---|---|
| Institute | Institut für Werkstoffwissenschaften und -technologien |
| Academic chair | 33341400 FG Polymerwerkstoffe und -technologien |
Contact
| Office | PTK |
|---|---|
| Contact person | Auhl, Dietmar Werner |
| E-mail address | stud@ptk.tu-berlin.de |
| Website | http://www.tu.berlin/ptk |
Learning outcomes
In this course the students will:
- gather advanced scientific skills for preparation, processing and applications of biomedical materials and technologies,
- learn how to transfer skills to characteristic fields of the biomedical sector,
- gain practical and methodical expertise to plan and assist in developments for biomedical materials and technologies,
- knowledge for target-oriented developments and optimisations in biomedical materials technologies
- deepen their own Information- and Research techniques
- develop and improve communication, co-operation and co-working techniques in interdisciplinary groups with strong time constraints
The course covers:
30 % Knowledge & Understanding
20 % Development & Design
20 % Research & Evaluation
20 % Application & Practice
10 % Interpersonal Skills
- gather advanced scientific skills for preparation, processing and applications of biomedical materials and technologies,
- learn how to transfer skills to characteristic fields of the biomedical sector,
- gain practical and methodical expertise to plan and assist in developments for biomedical materials and technologies,
- knowledge for target-oriented developments and optimisations in biomedical materials technologies
- deepen their own Information- and Research techniques
- develop and improve communication, co-operation and co-working techniques in interdisciplinary groups with strong time constraints
The course covers:
30 % Knowledge & Understanding
20 % Development & Design
20 % Research & Evaluation
20 % Application & Practice
10 % Interpersonal Skills
Content
Historic developments of Biomedical Materials and Technologies from the Antique via Middle Ages to modern times as well as outlook to future trends
Challenges, risks, regulations and opportunities of Material, Process and Product Design with biocompatible and bioresorbable materials
Comparisons and discussions of natural and artificial materials regarding feasibility, metabolic pathways, (cyto-)toxicity, etc.
Evaluation of several selected examples, e.g. anti-inflammatory adhesives, anti-microbial catheters, curable fillers, injectable hydro-gels, hygienic clothing and textiles, tissue and organ replacements, abrasion-resistant hip and knee implant s, flexible intra-ocular lenses, patient-specific stents, wound dressings, etc.
Fabrication routes under clean-room and GMP conditions: fibre and electro-spinning, film blowing and casting, hot melt and solution extrusion, moulding, vacuum and thermo-forming
Hands-on practical lab experiences with biomedical materials, processes, and products, e.g. fabrication and analysis of films, fibres, and textiles as well as exercise studies on stabilisation, sterilisation and degradation
Challenges, risks, regulations and opportunities of Material, Process and Product Design with biocompatible and bioresorbable materials
Comparisons and discussions of natural and artificial materials regarding feasibility, metabolic pathways, (cyto-)toxicity, etc.
Evaluation of several selected examples, e.g. anti-inflammatory adhesives, anti-microbial catheters, curable fillers, injectable hydro-gels, hygienic clothing and textiles, tissue and organ replacements, abrasion-resistant hip and knee implant s, flexible intra-ocular lenses, patient-specific stents, wound dressings, etc.
Fabrication routes under clean-room and GMP conditions: fibre and electro-spinning, film blowing and casting, hot melt and solution extrusion, moulding, vacuum and thermo-forming
Hands-on practical lab experiences with biomedical materials, processes, and products, e.g. fabrication and analysis of films, fibres, and textiles as well as exercise studies on stabilisation, sterilisation and degradation
Module components
Compulsory area
The following courses are mandatory for this module:
| Courses | Type | Number | Frequency | Language | Hours per week | Course catalog |
|---|---|---|---|---|---|---|
| Biomedical Materials and Technologies (Biomedizinische Materialien und Technologien) | Internship | 3414 L 002 | Summer semester | [en] | 2 | ISIS |
| Biomedizinische Materialien und Technologien (Biomedical Materials and Technologies) | Integrated course | 3414 L 001 | Summer semester | [de] | 2 | ISIS |
Workload and credit points
Biomedical Materials and Technologies (Biomedizinische Materialien und Technologien) (Internship)
| Workload description | Multiplier | Hours | Total |
|---|---|---|---|
| Attendance | 6 | 5 h | 30 h |
| Pre/post processing | 6 | 6.5 h | 39 h |
| 69 h | |||
Biomedizinische Materialien und Technologien (Biomedical Materials and Technologies) (Integrated course)
| Workload description | Multiplier | Hours | Total |
|---|---|---|---|
| Attendance | 15 | 2 h | 30 h |
| Pre/post processing | 15 | 2 h | 30 h |
| 60 h | |||
Course-independent workload
| Workload description | Multiplier | Hours | Total |
|---|---|---|---|
| Exam preparation | 1 | 50 h | 50 h |
| 50 h | |||
The workload of the module adds up to 179 hours. The module therefore comprises 6 credit points.
Description of teaching and learning methods
An integrated course comprising practical group exercises supervised by academic and student staff.
Requirements for participation and examination
Desirable prerequisites for participation in the courses:
This module has no desirable prerequisites for the courses.
Mandatory requirements for the module examination registration:
This module has no examination requirements.
Completion of the module
| Grading | Graded |
|---|---|
| Exam format | Portfolio examination |
| Type of portfolio examination | 100 points in total |
| Language | English, German |
Test elements
| Name | Points/Weight | Category | Duration/Extent |
|---|---|---|---|
| Short presentation and oral feedback on practical work | 25 | oral | 30 min |
| Reports for practical work | 25 | written | at least 10 pages per report |
| Written exam | 50 | written | 60 min |
Exam description
To be eligible to attend the oral consultation, you must have successfully completed the placement and submitted all reports.
Duration of the module
The following number of semesters is estimated for taking and completing the module: 1 semester(s).
This module can be started in the following semesters: Summer semester.
Maximum number of participants
This module is not limited to a number of students.
Registration procedures
Registration for the examination is carried out in accordance with the current version of the AllgStuPO. Registration for the examination is done online via MOSES.
Recommended reading, lecture notes
Lecture notes
unavailable
Electronic lecture notes
unavailable
Recommended literature
- Ausgabe der Literaturliste in den Lehrveranstaltungen
Assigned programs
This module version is used in the following programs:
| Program / program version | Semester(s) | Curriculum component |
|---|---|---|
| Materialwissenschaft und Werkstofftechnik StuPO 2022 | SS 2026 | Fachspezifischer Wahlpflichtbereich › Natur- und ingenieurwissenschaftliche Aspekte der Materialwissenschaft und Werkstofftechnik |
| WS 2026/27 | Fachspezifischer Wahlpflichtbereich › Natur- und ingenieurwissenschaftliche Aspekte der Materialwissenschaft und Werkstofftechnik |
Elective module in Polymer Science M.Sc.
Miscellaneous
Not specified