Energie-, Impuls- und Stofftransport II A für Chemieingenieure BSc (lab course)Module description #30999 / Version 7
- 3 CP
- Portfolio examination
- Graded
- Winter and summer semester
- German
This module description is not valid in the current semester (Winter semester 2026/27).
Current version (v8)
| Module / Version | #30999 / #7 |
|---|---|
| Validity | Summer semester 2024 – Winter semester 2025/26 |
| Available language(s) | German |
| Credit points | 3 |
| Person responsible for the module | Kraume, Matthias |
| Grading | Graded |
| Exam format | Portfolio examination |
| Language(s) of instruction | German |
Affiliation
| Faculty | Fakultät III |
|---|---|
| Institute | Institut für Prozess und Verfahrenstechnik |
| Academic chair | 33351300 FG Verfahrenstechnik |
Contact
| Office | ACK 7 |
|---|---|
| Contact person | Villwock, Jörn |
| E-mail address | sekretariat@vt.tu-berlin.de |
| Website | https://www.tu.berlin/verfahrenstechnik |
Learning outcomes
At the end of the course a successful student will be able to
- plan simple process engineering experiments and carry them out with the necessary care
- describe transport phenomena in simple experiments mathematically and physically
- analyze and evaluate experimental results in comparison with known laws and correlations from literature
- understand and follow the safety measures required in laboratory work
- prepare a scientific report
- coordinate the cooperation in small groups
The course conveys:
20 % knowledge & understanding, 20 % analysis & methodology, 20 % research & evaluation.
30 % application & practice, 10 % social competence.
- plan simple process engineering experiments and carry them out with the necessary care
- describe transport phenomena in simple experiments mathematically and physically
- analyze and evaluate experimental results in comparison with known laws and correlations from literature
- understand and follow the safety measures required in laboratory work
- prepare a scientific report
- coordinate the cooperation in small groups
The course conveys:
20 % knowledge & understanding, 20 % analysis & methodology, 20 % research & evaluation.
30 % application & practice, 10 % social competence.
Content
- Safety briefing on laboratory work
- Basic experiments, building on the lecture content of EIS IIA, such as heat exchangers, Bernoulli equation, pressure loss in pipe flow and convective mass transfer
- Application of simple measurement methods in process engineering
- Basics of scientific writing
- Basic experiments, building on the lecture content of EIS IIA, such as heat exchangers, Bernoulli equation, pressure loss in pipe flow and convective mass transfer
- Application of simple measurement methods in process engineering
- Basics of scientific writing
Module components
Compulsory area
The following courses are mandatory for this module:
| Courses | Type | Number | Frequency | Language | Hours per week | Course catalog |
|---|---|---|---|---|---|---|
| Energie-, Impuls- und Stofftransport II A | Internship | 0331 L 039 | Winter and summer semester | [de] | 2 | WS 2026/27 (1) ISIS |
Courses in the course catalog
Courses created from the teaching units of this module.
Winter semester 2026/27 (1)
Energie-, Impuls- und Stofftransport II A (Internship) 1
- Energie-, Impuls- und Stofftransport II A (EIS II A) (Praktikum) Blockveranstaltung Mo. 01.03.- Fr. 12.03.2027, Mo-Fr 9-15 Uhr 0331 L 039
Workload and credit points
Energie-, Impuls- und Stofftransport II A (Internship)
| Workload description | Multiplier | Hours | Total |
|---|---|---|---|
| Report | 30 | 1 h | 30 h |
| Attendance | 30 | 2 h | 60 h |
| 90 h | |||
The workload of the module adds up to 90 hours. The module therefore comprises 3 credit points.
Description of teaching and learning methods
Lab work, group work, seminar
IMPORTANT:
For practical reasons, only a limited number of participants can be considered for participation in the practical course per semester.
Please also note the information under the points: "Miscellaneous" and "Requirements for participation and examination"
IMPORTANT:
For practical reasons, only a limited number of participants can be considered for participation in the practical course per semester.
Please also note the information under the points: "Miscellaneous" and "Requirements for participation and examination"
Requirements for participation and examination
Desirable prerequisites for participation in the courses:
Simultaneous or previous participation in the course of the module Moduls Energie,- Impuls,- und Stofftransport IIA is recommended.
Mandatory requirements for the module examination registration:
This module has no examination requirements.
Completion of the module
| Grading | Graded |
|---|---|
| Exam format | Portfolio examination |
| Type of portfolio examination | 100 points in total |
| Language | German |
Test elements
| Name | Points/Weight | Category | Duration/Extent |
|---|---|---|---|
| Documented practical work (report) | 60 | written | ca. 40 Seiten pro Gruppe |
| Basics and knowledge test for the experimental setup | 10 | oral | ca. 15 Min. |
| Experiment preparation and execution | 30 | practical |
Exam description
Portfolio examination (grading according to Scheme 1 of Fac. III, see appendix to the module catalogue).
Note: the above-mentioned examination elements refer exclusively to the practical course. This is only to be completed by students in the BSc Chemical Engineering.
IMPORTANT NOTICE:
Passing both modules (30999 and 30379) is required to pass the entire EIS II A examination in the Chemical Engineering BSc programme. The recognition of the entire construct takes place via the FG Technische Chemie Mr. Beuster against presentation of both certificates / grade records.
Note: the above-mentioned examination elements refer exclusively to the practical course. This is only to be completed by students in the BSc Chemical Engineering.
IMPORTANT NOTICE:
Passing both modules (30999 and 30379) is required to pass the entire EIS II A examination in the Chemical Engineering BSc programme. The recognition of the entire construct takes place via the FG Technische Chemie Mr. Beuster against presentation of both certificates / grade records.
Duration of the module
The following number of semesters is estimated for taking and completing the module: 1 semester(s).
This module can be started in the following semesters: Winter and summer semester.
Maximum number of participants
The maximum capacity of participants is 18.
Registration procedures
IMPORTANT:
The first registration for the internship takes place online via a list of participants on the ISIS platform:
Procedure:
1) Pre-registration list provided by the FG via ISIS at the beginning of the semester.
2) Participation - those interested in the course register with full details.
Registration for the portfolio examination is done by the students online via the MTS (Moses account).
1) Provision of the registration under the module no. in the MTS by the FG
2) Participation - those interested in the course register with full details incl. email.
3) If there are more than 18 registered students, Par. 48 sec. 3 of the General Study and Examination Regulations is applicable.
4) Those interested who are not considered will be informed and deregistered in the MTS.
The registration procedure is subject to the deadlines and dates specified by the department.
For further information see. Website : https://www.tu.berlin/verfahrenstechnik
The first registration for the internship takes place online via a list of participants on the ISIS platform:
Procedure:
1) Pre-registration list provided by the FG via ISIS at the beginning of the semester.
2) Participation - those interested in the course register with full details.
Registration for the portfolio examination is done by the students online via the MTS (Moses account).
1) Provision of the registration under the module no. in the MTS by the FG
2) Participation - those interested in the course register with full details incl. email.
3) If there are more than 18 registered students, Par. 48 sec. 3 of the General Study and Examination Regulations is applicable.
4) Those interested who are not considered will be informed and deregistered in the MTS.
The registration procedure is subject to the deadlines and dates specified by the department.
For further information see. Website : https://www.tu.berlin/verfahrenstechnik
Recommended reading, lecture notes
Lecture notes
unavailable
Electronic lecture notes
available – wird im Zuge der LV bereitgestellt
Recommended literature
- Baehr/Stephan: Wärme- und Stoffübertragung, Springer Vieweg Verlag, Berlin , Heidelberg 10. Aufl., 2019
- Bird/Stewart/Lightfoot: Transport Phenomena, John Wiley & Sons, Revised 2nd Ed., 2007
- Kraume : Transportvorgänge in der Verfahrenstechnik , Springer Vieweg Verlag , Berlin Heidelberg 2020
- Skript zur Vorlesung Energie-, Impuls- und Stofftransport II
- VDI e.v.(Hrsg.) : VDI Wärmeatlas, Springer Vieweg Verlag, Berlin Heidelberg 2013
Assigned programs
This module is not used in any program.
Target group are students of the degree programme: BSc Chemieingenieurwesen (compulsory elective course).
Miscellaneous
Passing both modules (the present one and 30379) is required to pass the entire EIS II A examination in the Chemical Engineering BSc programme. The recognition of the entire construct takes place via the FG Technische Chemie Mr. Beuster against presentation of both certificates / grade records.