Plant Design and Process AutomationModule description #31000 / Version 3
- 6 CP
- Written exam
- Graded
- Summer semester
- German
| Module / Version | #31000 / #3 |
|---|---|
| Validity | Since Winter semester 2026/27 |
| Available language(s) | English, German |
| Credit points | 6 |
| Person responsible for the module | Wietstock, Philip |
| Grading | Graded |
| Exam format | Written exam |
| Language(s) of instruction | German |
Affiliation
| Faculty | Fakultät III |
|---|---|
| Institute | Institut für Lebensmitteltechnologie und Chemie |
| Academic chair | 33321900 FG Brau- und Getränketechnologie |
Contact
| Office | ACK 4 |
|---|---|
| Contact person | Wietstock, Philip |
| E-mail address | philip.wietstock@tu-berlin.de |
| Website | Not specified |
Learning outcomes
Upon completion of the module on Plant Engineering and Process Control in the Brewing and
Beverage Industry for the Master’s program, students will have mastered the following knowledge:
- Operational principles of production facilities
- Successful and responsible management of production units
- Key performance indicators for brewery facilities
- Planning: Knowledge of planning using morphological systems according to Zwicky, Gantt
charts, and comparable methods
- Ability to design and calculate plant dimensions and their interrelationships
- Recognition of logical relationships between individual planning steps
- Knowledge of the theoretical foundations of process automation
- Ability to configure process modules and program them
The course primarily covers:
Technical competence 40%, Methodological competence 30%, Systems competence 20%, Social competence 10%
Beverage Industry for the Master’s program, students will have mastered the following knowledge:
- Operational principles of production facilities
- Successful and responsible management of production units
- Key performance indicators for brewery facilities
- Planning: Knowledge of planning using morphological systems according to Zwicky, Gantt
charts, and comparable methods
- Ability to design and calculate plant dimensions and their interrelationships
- Recognition of logical relationships between individual planning steps
- Knowledge of the theoretical foundations of process automation
- Ability to configure process modules and program them
The course primarily covers:
Technical competence 40%, Methodological competence 30%, Systems competence 20%, Social competence 10%
Content
The course “Design of Brewery Systems” covers the following topics:
- Fundamentals of planning
- Calculations of specific equipment sizes and their logical relationships
- Practical application of an Excel tool for calculations
- Independent evaluation of system planning
The internship in brewery process automation covers the following topics:
- Theoretical fundamentals of automation technology
- Installation and configuration of hardware components
- Practical application of specific automation technology using control modules or in real-world scenarios
- Independent programming on simulation modules
Technical competence 40%, methodological competence 30%, systemic competence 20%, social competence 10%
- Fundamentals of planning
- Calculations of specific equipment sizes and their logical relationships
- Practical application of an Excel tool for calculations
- Independent evaluation of system planning
The internship in brewery process automation covers the following topics:
- Theoretical fundamentals of automation technology
- Installation and configuration of hardware components
- Practical application of specific automation technology using control modules or in real-world scenarios
- Independent programming on simulation modules
Technical competence 40%, methodological competence 30%, systemic competence 20%, social competence 10%
Module components
Compulsory area
The following courses are mandatory for this module:
Workload and credit points
Auslegung von Brauereianlagen (Lecture)
| Workload description | Multiplier | Hours | Total |
|---|---|---|---|
| Attendance | 15 | 2 h | 30 h |
| Preparation for exam | 1 | 60 h | 60 h |
| Pre/post preparation | 15 | 2 h | 30 h |
| 120 h | |||
Prozessautomatisierung von Brauereianlagen (Internship)
| Workload description | Multiplier | Hours | Total |
|---|---|---|---|
| Attendance | 15 | 2 h | 30 h |
| Pre/post preparation | 15 | 2 h | 30 h |
| 60 h | |||
The workload of the module adds up to 180 hours. The module therefore comprises 6 credit points.
Description of teaching and learning methods
The module consists of two lectures that cover the theoretical fundamentals of plant engineering and the design of brewery systems using electronic tools. The knowledge gained is discussed during the lectures.
In the laboratory course “Process Automation of Brewing Plants,” the theoretical
fundamentals of process automation and its applications in breweries are presented using electronic learning media and then put into practice directly with the students. In this context, the hardware is set up on computers, process modules, and control units, and the fundamentals of automation using SIMATIC S7 - STEP 7 are learned and discussed with the help of practical examples. The practicum concludes with a programming assignment in which students automate a simulated process largely on their own.
In the laboratory course “Process Automation of Brewing Plants,” the theoretical
fundamentals of process automation and its applications in breweries are presented using electronic learning media and then put into practice directly with the students. In this context, the hardware is set up on computers, process modules, and control units, and the fundamentals of automation using SIMATIC S7 - STEP 7 are learned and discussed with the help of practical examples. The practicum concludes with a programming assignment in which students automate a simulated process largely on their own.
Requirements for participation and examination
Desirable prerequisites for participation in the courses:
Attendance in the “Technology of Malt and Beer Production” module and the “Malting and Brewing Machinery and Equipment” module is strongly recommended.
Mandatory requirements for the module examination registration:
This module has no examination requirements.
Completion of the module
| Grading | Graded |
|---|---|
| Exam format | Written exam |
| Language | German |
| Duration/Extent | 90 minutes |
Duration of the module
The following number of semesters is estimated for taking and completing the module: 1 semester(s).
This module can be started in the following semesters: Summer semester.
Maximum number of participants
The maximum capacity of participants is 20.
Registration procedures
Enrolling in ISIS course
Recommended reading, lecture notes
Lecture notes
unavailable
Electronic lecture notes
available
Recommended literature
- Literaturhinweise werden in den Veranstaltungen bekannt gegeben.
Assigned programs
This module version is used in the following programs:
| Program / program version | Semester(s) | Curriculum component |
|---|---|---|
| Brewing Science StuPO 2022 | WS 2026/27 | Fachspezifische Wahlpflichtmodule |
| Brewing and Beverage Technology StuPO 2022 | WS 2026/27 | Übergreifende fachspezifische Wahlpflichtmodule |
| Brewing and Beverage Technology StuPO 2022 | WS 2026/27 | Wahlpflichtmodule › Ergänzende fachspezifische Wahlpflicht |
Miscellaneous
Not specified