Off-Earth Additive Manufacturing (Space, the Moon, Mars)Module description #31140 / Version 1
- 6 CP
- Portfolio examination
- Graded
- Winter semester
- English
| Module / Version | #31140 / #1 |
|---|---|
| Validity | Since Winter semester 2024/25 |
| Available language(s) | English |
| Credit points | 6 |
| Person responsible for the module | Karl, David |
| Grading | Graded |
| Exam format | Portfolio examination |
| Language(s) of instruction | English |
Affiliation
| Faculty | Fakultät III |
|---|---|
| Institute | Institut für Werkstoffwissenschaften und -technologien |
| Academic chair | 33341300 FG Keramische Werkstoffe |
Contact
| Office | BA 3 |
|---|---|
| Contact person | Karl, David |
| E-mail address | OEAM@ceramics.tu-berlin.de |
| Website | https://www.tu.berlin/ceramics |
Learning outcomes
This course aims to equip students with the knowledge and skills necessary to understand and develop Additive Manufacturing (AM) technologies for space exploration and utilization. The module teaches the most important principles and procedures relevant to additive manufacturing employing shipped and mined feedstocks in the off-world environment. In specific, students will gain knowledge in the following topics:
• Understanding relevant Off-Earth AM process categories, feedstocks, and fusion mechanisms.
• Knowledge of different relevant feedstock states such as powder, wire/filaments, liquids, and colloids.
• Analysis of how gravity, vacuum/low pressure, and temperature affect AM processes in these environments.
• General knowledge of space resources on different celestial bodies.
• Knowledge of current AM techniques using regolith simulants as found in the literature.
• Methods of direct regolith feedstock refining and advanced techniques for the SRU processing of highly refined AM feedstocks.
• Understanding of material selection for Off-Earth AM and potential parts plus applications areas.
• Understanding relevant Off-Earth AM process categories, feedstocks, and fusion mechanisms.
• Knowledge of different relevant feedstock states such as powder, wire/filaments, liquids, and colloids.
• Analysis of how gravity, vacuum/low pressure, and temperature affect AM processes in these environments.
• General knowledge of space resources on different celestial bodies.
• Knowledge of current AM techniques using regolith simulants as found in the literature.
• Methods of direct regolith feedstock refining and advanced techniques for the SRU processing of highly refined AM feedstocks.
• Understanding of material selection for Off-Earth AM and potential parts plus applications areas.
Content
This course covers the fundamentals of the rapidly developing field of Additive Manufacturing (AM) in Space, on the Moon and Mars. It will consider two basic feedstock approaches for Off-Earth production: (i) AM with Earth-based raw materials in Space and (ii) Off-Earth sourced feedstocks from various celestial bodies (the Moon, Mars, and Asteroids) - an approach that is called Space Resource Utilization (SRU). Major sections of the course will focus on the SRU feedstock approach, discussing specifically regolith (and water), including a summary of their genesis, availability and relevant properties for AM. After briefly introducing/reiterating the seven ISO/ASTM AM process categories, coursework will discuss the impact of gravity, vacuum/low pressure, and temperature on Off-Earth AM in Space, as well as introduce various mitigation approaches to overcome such challenges.
The module covers the application of raw regolith in AM, with an emphasis on ceramic AM techniques. Additionally, the course reviews current AM techniques using regolith simulants, as reported in the literature. Scientific aspects of powder technology and colloidal science for regolith processing are introduced, along with methods for refining SRU feedstocks. Finally, the course explores future concepts and advanced techniques for AM using highly processed SRU feedstocks.
The module covers the application of raw regolith in AM, with an emphasis on ceramic AM techniques. Additionally, the course reviews current AM techniques using regolith simulants, as reported in the literature. Scientific aspects of powder technology and colloidal science for regolith processing are introduced, along with methods for refining SRU feedstocks. Finally, the course explores future concepts and advanced techniques for AM using highly processed SRU feedstocks.
Module components
Compulsory area
The following courses are mandatory for this module:
| Courses | Type | Number | Frequency | Language | Hours per week | Course catalog |
|---|---|---|---|---|---|---|
| Off-Earth Additive Manufacturing (Space, the Moon, Mars) | Integrated course | 3413 L 001 | Winter semester | [en] | 4 | ISIS |
Workload and credit points
Off-Earth Additive Manufacturing (Space, the Moon, Mars) (Integrated course)
| Workload description | Multiplier | Hours | Total |
|---|---|---|---|
| Online video lectures | 8 | 2 h | 16 h |
| Work on quizzes | 8 | 4 h | 32 h |
| Main session - attendance | 8 | 2 h | 16 h |
| Group discussion session - attendance | 8 | 2 h | 16 h |
| Pre/post processing online sessions | 8 | 2 h | 16 h |
| Assignments and readings | 8 | 4 h | 32 h |
| Project work | 8 | 6.5 h | 52 h |
| 180 h | |||
The workload of the module adds up to 180 hours. The module therefore comprises 6 credit points.
Description of teaching and learning methods
The module is taught in an 8-week online course format, employing the flipped classroom approach. Conceptionally, the module consists of web-based self-study parts and online classroom discussion parts. For the web-based self-study part, the students watch online video lectures and work on quizzes, assignments, readings and projects. For the online classroom discussion parts, the students meet with the lecturer twice per week for a “Main Session” and a “Group Discussion Session” via a video call.
Requirements for participation and examination
Desirable prerequisites for participation in the courses:
Completion of the module: “Introduction to Additive Manufacturing (3D Printing)” - [Module #30667].
Mandatory requirements for the module examination registration:
This module has no examination requirements.
Completion of the module
| Grading | Graded |
|---|---|
| Exam format | Portfolio examination |
| Type of portfolio examination | 100 points in total |
| Language | English |
Test elements
| Name | Points/Weight | Category | Duration/Extent |
|---|---|---|---|
| Quizzes on online video lectures | 20 | written | Weekly |
| Quantitative assignments | 20 | flexibel | No information |
| Creative assignments | 20 | flexibel | No information |
| Individual project | 35 | practical | No information |
| Participation & work habits | 5 | oral | No information |
Exam description
Students fail the course if they score below 50 points (out of 100).
Duration of the module
The following number of semesters is estimated for taking and completing the module: 1 semester(s).
This module can be started in the following semesters: Winter semester.
Maximum number of participants
The maximum capacity of participants is 30.
Registration procedures
Registration for the portfolio examination takes place in Moses or the examination office. The registration must be completed before the first assessment-relevant partial performance is provided.
Recommended reading, lecture notes
Lecture notes
unavailable
Electronic lecture notes
available
Recommended literature
- I. Gibson, D.W. Rosen, B. Stucker, Additive manufacturing technologies: 3D printing, rapid prototyping, and direct digital manufacturing, 3th edition, Springer, New York, 2021, ISBN: 978-3-030-56127-7
- T. Ghidini, M. Grasso, J. Gumpinger, A. Makaya, B.M. Colosimo, Additive manufacturing in the new space economy: Current achievements and future perspectives, Progress in Aerospace Sciences (2023) 100959. https://doi.org/10.1016/j.paerosci.2023.100959
- E. Kulu, M. Lofqvist, In-Space Economy in 2023-Statistical Overview and Trends, IAC-23,D3,3,10,x76983, in: Proceedings of the 74th International Astronautical Congress (IAC 2023), Paris, France, 2023
Assigned programs
This module version is used in the following programs:
| Program / program version | Semester(s) | Curriculum component |
|---|---|---|
| Material Science and Engineering StuPO 2009 | SS 2025 | Vertiefungsmodule |
| WS 2025/26 | Vertiefungsmodule | |
| SS 2026 | Vertiefungsmodule | |
| WS 2026/27 | Vertiefungsmodule | |
| Material Science and Engineering Material Science and Engineering (M. Sc.) - StuPO 2024 | SS 2025 | Fachzspezifische Wahlpflicht › Natur- und ingenieurwissenschaftliche Aspekte der Materialwissenschaft und Werkstofftechnik › FG Keramische Werkstoffe |
| WS 2025/26 | Fachzspezifische Wahlpflicht › Natur- und ingenieurwissenschaftliche Aspekte der Materialwissenschaft und Werkstofftechnik › FG Keramische Werkstoffe | |
| SS 2026 | Fachzspezifische Wahlpflicht › Natur- und ingenieurwissenschaftliche Aspekte der Materialwissenschaft und Werkstofftechnik › FG Keramische Werkstoffe | |
| WS 2026/27 | Fachzspezifische Wahlpflicht › Natur- und ingenieurwissenschaftliche Aspekte der Materialwissenschaft und Werkstofftechnik › FG Keramische Werkstoffe |
Miscellaneous
Not specified