CFD SimulationModule description #31156 / Version 1
- 6 CP
- Portfolio examination
- Graded
- Winter semester
- German
This module description is not valid in the current semester (Winter semester 2026/27).
Current version (v2)
| Module / Version | #31156 / #1 |
|---|---|
| Validity | Winter semester 2024/25 – Summer semester 2025 |
| Available language(s) | German |
| Credit points | 6 |
| Person responsible for the module | Kriegel, Martin |
| Grading | Graded |
| Exam format | Portfolio examination |
| Language(s) of instruction | German |
Affiliation
| Faculty | Fakultät III |
|---|---|
| Institute | Institut für Energietechnik |
| Academic chair | 33371100 FG Energie, Komfort und Gesundheit in Gebäuden |
Contact
| Office | HL 45 |
|---|---|
| Contact person | Brandt, Stefan |
| E-mail address | kontakt@hri.tu-berlin.de |
| Website | https://www.tu.berlin/hri |
Learning outcomes
This module provides students with basic knowledge and skills in computational fluid dynamics (CFD) with a focus on its application in indoor climate technology.
Participants will be able to use CFD software to solve flow problems, e.g. to visualise and optimise thermal comfort, air quality and pollutant distribution.
Participants will be able to use CFD software to solve flow problems, e.g. to visualise and optimise thermal comfort, air quality and pollutant distribution.
Content
Introduction to the basics of fluid mechanics:
-continuity equation
-Momentum equation (Navier-Stokes equations)
-Energy equation
-turbulence modelling
Introduction to numerical methods:
- Discretisation methods (finite volume method, finite difference method)
-Solution of the Navier-Stokes equations
- Grid generation
- Boundary conditions
CFD software:
- Introduction to commercial CFD software (e.g. ANSYS Fluent, Star CCM+, OpenFOAM) especially for indoor air flows
- Pre-processing (geometry creation, grid generation, boundary conditions)
- Carrying out CFD calculations for typical ventilation problems
- Post-processing and visualisation of results with key figures (e.g. temperature distribution, air velocities, pollutant concentrations)
Areas of application e.g:
- Indoor air flow in residential and office buildings
- Ventilation and air conditioning of industrial buildings
- Clean room technology and laboratory ventilation
- Transport of pollutants indoors
- flow optimisation
- Thermal comfort optimisation
-continuity equation
-Momentum equation (Navier-Stokes equations)
-Energy equation
-turbulence modelling
Introduction to numerical methods:
- Discretisation methods (finite volume method, finite difference method)
-Solution of the Navier-Stokes equations
- Grid generation
- Boundary conditions
CFD software:
- Introduction to commercial CFD software (e.g. ANSYS Fluent, Star CCM+, OpenFOAM) especially for indoor air flows
- Pre-processing (geometry creation, grid generation, boundary conditions)
- Carrying out CFD calculations for typical ventilation problems
- Post-processing and visualisation of results with key figures (e.g. temperature distribution, air velocities, pollutant concentrations)
Areas of application e.g:
- Indoor air flow in residential and office buildings
- Ventilation and air conditioning of industrial buildings
- Clean room technology and laboratory ventilation
- Transport of pollutants indoors
- flow optimisation
- Thermal comfort optimisation
Module components
Compulsory area
The following courses are mandatory for this module:
| Courses | Type | Number | Frequency | Language | Hours per week | Course catalog |
|---|---|---|---|---|---|---|
| Strömungssimulation | Integrated course | 0330 L206 | Winter semester | [de] | 4 | ISIS |
Workload and credit points
Strömungssimulation (Integrated course)
| Workload description | Multiplier | Hours | Total |
|---|---|---|---|
| Attendance | 15 | 4 h | 60 h |
| Pre/post processing | 15 | 6 h | 90 h |
| 150 h | |||
Course-independent workload
| Workload description | Multiplier | Hours | Total |
|---|---|---|---|
| Prüfung & Prüfungsvobereitung | 1 | 30 h | 30 h |
| 30 h | |||
The workload of the module adds up to 180 hours. The module therefore comprises 6 credit points.
Description of teaching and learning methods
The module consists of an integrated course. In the integrated course, practical exercises are carried out on the PC. Students are given additional tasks to work on independently.
Requirements for participation and examination
Desirable prerequisites for participation in the courses:
- Basic knowledge of fluid mechanics, thermodynamics, indoor climate technology
- Completed module Energy and Systems Engineering for Buildings
- Completed module Energy Simulation
- Completed module Energy and Systems Engineering for Buildings
- Completed module Energy Simulation
Mandatory requirements for the module examination registration:
This module has no examination requirements.
Completion of the module
| Grading | Graded |
|---|---|
| Exam format | Portfolio examination |
| Type of portfolio examination | 100 points in total |
| Language | German |
Test elements
| Name | Points/Weight | Category | Duration/Extent |
|---|---|---|---|
| praktische protokollierte Leistung | 25 | flexibel | 10-15 Seiten |
| Rücksprache | 75 | oral | 30 Minuten |
Duration of the module
The following number of semesters is estimated for taking and completing the module: 1 semester(s).
This module can be started in the following semesters: Winter semester.
Maximum number of participants
The maximum capacity of participants is 20.
Registration procedures
- Registration for the examination takes place via QISPOS/ MTS / online examination registration if applicable.
Recommended reading, lecture notes
Lecture notes
unavailable
Electronic lecture notes
available
Recommended literature
No recommended literature given
Assigned programs
This module version is used in the following programs:
| Program / program version | Semester(s) | Curriculum component |
|---|---|---|
| Building Energy Engineering Building Energy Engineering (M. Sc.) - StuPO 2024 | SS 2025 | Pflichtmodule |
Miscellaneous
The use of your own laptop is a prerequisite for participation in the course!