Introduction to material scienceModule description #31179 / Version 4
- 3 CP
- Portfolio examination
- Graded
- Winter and summer semester
- German
| Module / Version | #31179 / #4 |
|---|---|
| Validity | Since Summer semester 2025 |
| Available language(s) | German |
| Credit points | 3 |
| Person responsible for the module | Gurlo, Aleksander |
| Grading | Graded |
| Exam format | Portfolio examination |
| Language(s) of instruction | German |
Affiliation
| Faculty | Fakultät III |
|---|---|
| Institute | Institut für Werkstoffwissenschaften und -technologien |
| Academic chair | 33341300 FG Keramische Werkstoffe |
Contact
| Office | BA 3 |
|---|---|
| Contact person | Görke, Oliver |
| E-mail address | gurlo@ceramics.tu-berlin.de |
| Website | Not specified |
Learning outcomes
- a broad basic knowledge of the material structure as a chain of action from the atom to the component/module,
- an overview of the most important material systems in technical applications - with a focus on apparatus and plant engineering - whereby a very characteristic technical or physico-chemical property is dealt with as an example in each case,
- a profound technical knowledge of design-relevant mechanical parameters (which are developed comparatively for all material systems),
- an overview of surface processes such as corrosion, friction, wear and adsorption, because these concepts are important for process engineering systems (reactors, fermenters, sewage treatment plants, pipelines, valves, pumps, filters, etc.), but also influence their operation and service life,
- use practical examples to illustrate the chain of effects from material structure and properties to material selection.
The course teaches:
60 % knowledge & understanding, 30 % analysis & methodology, 10 % development and design
- an overview of the most important material systems in technical applications - with a focus on apparatus and plant engineering - whereby a very characteristic technical or physico-chemical property is dealt with as an example in each case,
- a profound technical knowledge of design-relevant mechanical parameters (which are developed comparatively for all material systems),
- an overview of surface processes such as corrosion, friction, wear and adsorption, because these concepts are important for process engineering systems (reactors, fermenters, sewage treatment plants, pipelines, valves, pumps, filters, etc.), but also influence their operation and service life,
- use practical examples to illustrate the chain of effects from material structure and properties to material selection.
The course teaches:
60 % knowledge & understanding, 30 % analysis & methodology, 10 % development and design
Content
- Basic structure of different material systems from the atom to the component.
- Constitution, phases and stability, basic concepts in dealing with materials.
- Overview of the main material classes (metals, ceramics, polymers), their production, properties and areas of application,
- Material systems - metallic materials (especially steels), polymer materials, glasses, ceramics, composite materials and coatings.
- Essential physico-chemical properties with a focus on mechanical properties
characteristics of testing technology and standardisation.
- Basic principles of material selection using practical examples.
- Constitution, phases and stability, basic concepts in dealing with materials.
- Overview of the main material classes (metals, ceramics, polymers), their production, properties and areas of application,
- Material systems - metallic materials (especially steels), polymer materials, glasses, ceramics, composite materials and coatings.
- Essential physico-chemical properties with a focus on mechanical properties
characteristics of testing technology and standardisation.
- Basic principles of material selection using practical examples.
Module components
Compulsory area
The following courses are mandatory for this module:
| Courses | Type | Number | Frequency | Language | Hours per week | Course catalog |
|---|---|---|---|---|---|---|
| Einführung in die Werkstoffwissenschaften | Integrated course | 0334 L 101 | Winter and summer semester | [de] | 2 | WS 2026/27 (1) ISIS |
| Einführung in die Werkstoffwissenschaften | Internship | 0334 L 102 | Winter and summer semester | [de] | 1 | WS 2026/27 (1) ISIS |
Courses in the course catalog
Courses created from the teaching units of this module.
Winter semester 2026/27 (2)
Einführung in die Werkstoffwissenschaften (Integrated course) 1
- Einführung in die Werkstoffwissenschaften (Integrierte Veranstaltung) Termingruppe 1 0334 L 101
Einführung in die Werkstoffwissenschaften (Internship) 1
- Einführung in die Werkstoffwissenschaften (Praktikum) 1. Termingruppe 0334 L 102
Workload and credit points
Einführung in die Werkstoffwissenschaften (Integrated course)
| Workload description | Multiplier | Hours | Total |
|---|---|---|---|
| Präsenzzeit | 15 | 2 h | 30 h |
| Vor-/Nachbereitung | 15 | 2 h | 30 h |
| 60 h | |||
Einführung in die Werkstoffwissenschaften (Internship)
| Workload description | Multiplier | Hours | Total |
|---|---|---|---|
| Präsenzzeit | 2 | 2.5 h | 5 h |
| Vor-/Nachbereitung | 2 | 5 h | 10 h |
| 15 h | |||
Course-independent workload
| Workload description | Multiplier | Hours | Total |
|---|---|---|---|
| Prüfungsvorbereitung | 1 | 15 h | 15 h |
| 15 h | |||
The workload of the module adds up to 90 hours. The module therefore comprises 3 credit points.
Description of teaching and learning methods
-VL: Teaching of theoretical and practice-oriented basics.
-PR: Consolidation, consolidation and application of the lecture material through practice-oriented example tasks, individual and group work
-PR: Consolidation, consolidation and application of the lecture material through practice-oriented example tasks, individual and group work
Requirements for participation and examination
Desirable prerequisites for participation in the courses:
Basic knowledge of mathematics and physics
Mandatory requirements for the module examination registration:
This module has no examination requirements.
Completion of the module
| Grading | Graded |
|---|---|
| Exam format | Portfolio examination |
| Type of portfolio examination | 100 points in total |
| Language | German |
Test elements
| Name | Points/Weight | Category | Duration/Extent |
|---|---|---|---|
| Antestat zum Praktikum | 4 | flexibel | jeweils 5 Fragen |
| Protokolle zum Praktikum | 36 | flexibel | Text + Diagramm |
| schriftlicher Test | 60 | written | 30 min |
Duration of the module
The following number of semesters is estimated for taking and completing the module: 1 semester(s).
This module can be started in the following semesters: Winter and summer semester.
Maximum number of participants
This module is not limited to a number of students.
Registration procedures
Die Anmeldung der Prüfungsäquivalenten Studienleistungen erfolgt über Moses/Qispos oder im Prüfungsamt. Die Anmeldung muss bis einen Werktag vor Erbringen der ersten Teilleistung erfolgen.
Die Anmeldung zu den Übungen/Praktikum findet online statt.
Die Anmeldung zu den Übungen/Praktikum findet online statt.
Recommended reading, lecture notes
Lecture notes
unavailable
Electronic lecture notes
unavailable
Recommended literature
- Bergmann: Werkstofftechnik 1+2
- Hornbogen; Werkstoffe
- Shackleford: Introduction to Materials Science
- Worch, Schatt: Werkstoffwissenschaften
Assigned programs
This module version is used in the following programs:
| Program / program version | Semester(s) | Curriculum component |
|---|---|---|
| Chemical Engineering BSc_ChemIng_2019 | SS 2025 | Pflichtbereich › Technische Grundlagen |
| WS 2025/26 | Pflichtbereich › Technische Grundlagen | |
| SS 2026 | Pflichtbereich › Technische Grundlagen | |
| WS 2026/27 | Pflichtbereich › Technische Grundlagen |
Chemieingenieurwesen - Bachelor of Science
Chemie - Bachelor
Technischer Umweltschutz - Bachelor
Chemie - Bachelor
Technischer Umweltschutz - Bachelor
Miscellaneous
Not specified