Practical Exercises on Process Modeling (4 CP)Module description #31184 / Version 1
- 4 CP
- Portfolio examination
- Graded
- Winter and summer semester
- German
This module description is not valid in the current semester (Winter semester 2026/27).
Current version (v2)
| Module / Version | #31184 / #1 |
|---|---|
| Validity | Summer semester 2025 – Summer semester 2025 |
| Available language(s) | English, German |
| Credit points | 4 |
| Person responsible for the module | Repke, Jens-Uwe |
| Grading | Graded |
| Exam format | Portfolio examination |
| Language(s) of instruction | German |
Affiliation
| Faculty | Fakultät III |
|---|---|
| Institute | Institut für Prozess und Verfahrenstechnik |
| Academic chair | 33351500 FG Dynamik und Betrieb technischer Anlagen |
Contact
| Office | KWT 9 |
|---|---|
| Contact person | Sengoba, Carl Elisha Kulekaana |
| E-mail address | lehre@dbta.tu-berlin.de |
| Website | https://www.tu.berlin/dbta/studium-lehre/lehrveranstaltungen-ii/computergestuetzte-uebungen-zur-prozessmodellierung |
Learning outcomes
The participants:
-know based on the basic module "Prozess- und Anlagendynamik" the methods of model formulation
-are skilled in programming in MATLAB and Simulink,
-are capable of development and innovation in the field of process- and plant dynamics,
-can work independently scientifically
-developed problem solving competency and capacity for teamwork.
The course teaches:
20% knowledge and comprehension, 20% analytical skills and methods, 20% development and design, 20%
transfer and practical application, 20% socail skills
-know based on the basic module "Prozess- und Anlagendynamik" the methods of model formulation
-are skilled in programming in MATLAB and Simulink,
-are capable of development and innovation in the field of process- and plant dynamics,
-can work independently scientifically
-developed problem solving competency and capacity for teamwork.
The course teaches:
20% knowledge and comprehension, 20% analytical skills and methods, 20% development and design, 20%
transfer and practical application, 20% socail skills
Content
- Application of MATLAB - programming environment to process engineering tasks
- Solving of theoretical tasks after previous introduction to the topic
- Transfer of algorithms from PAD lecture to executable simulation programs
- Solving of theoretical tasks after previous introduction to the topic
- Transfer of algorithms from PAD lecture to executable simulation programs
Module components
Compulsory area
The following courses are mandatory for this module:
| Courses | Type | Number | Frequency | Language | Hours per week | Course catalog |
|---|---|---|---|---|---|---|
| Prozessmodellierung | Internship | 0339 L 403 | Winter and summer semester | [de] | 4 | WS 2026/27 (1) ISIS |
Courses in the course catalog
Courses created from the teaching units of this module.
Winter semester 2026/27 (1)
Prozessmodellierung (Internship) 1
- Prozessmodellierung (Praktikum) Termingruppe 1 0339 L 403
Workload and credit points
Prozessmodellierung (Internship)
| Workload description | Multiplier | Hours | Total |
|---|---|---|---|
| Attendance | 15 | 4 h | 60 h |
| Pre/post processing | 15 | 4 h | 60 h |
| 120 h | |||
The workload of the module adds up to 120 hours. The module therefore comprises 4 credit points.
Description of teaching and learning methods
Students complete computer-aided tasks after being introduced to specific MATLAB-functions and having developed the workflow of the simulation programs under guidance of the instructors.
The computer-aided tasks are completed in groups of two students, where the programming and documentation of the tasks are performed independently.
A theoretical introduction motivates process engineering problems, which are afterwards solved by simulation programs developed by the students.
For a better understanding of the theoretical background, students are supported by a catalogue of questions for each lecture. These questions are answered by the students with support of the lecturer.
Students develop programs and a short corresponding documentation, which encompasses the provided questions.
A PC pool with MATLAB software is provided by the university.
The computer-aided tasks are completed in groups of two students, where the programming and documentation of the tasks are performed independently.
A theoretical introduction motivates process engineering problems, which are afterwards solved by simulation programs developed by the students.
For a better understanding of the theoretical background, students are supported by a catalogue of questions for each lecture. These questions are answered by the students with support of the lecturer.
Students develop programs and a short corresponding documentation, which encompasses the provided questions.
A PC pool with MATLAB software is provided by the university.
Requirements for participation and examination
Desirable prerequisites for participation in the courses:
Basic knowledge of equilibrium thermodynamics, process engineering and basic unit operations (e.g. distillation) are mandatory.
Knowledge of process control, process and plant dynamics and the modeling method are advantageous. Visiting the PAD lecture in parallel is possible.
Recommended for Master students.
First programming experience in MATLAB is helpful, the course teaches only application of MATLAB and is no MATLAB-tutorial class.
Knowledge of process control, process and plant dynamics and the modeling method are advantageous. Visiting the PAD lecture in parallel is possible.
Recommended for Master students.
First programming experience in MATLAB is helpful, the course teaches only application of MATLAB and is no MATLAB-tutorial class.
Mandatory requirements for the module examination registration:
This module has no examination requirements.
Completion of the module
| Grading | Graded |
|---|---|
| Exam format | Portfolio examination |
| Type of portfolio examination | 100 points per element |
| Language | German |
Test elements
| Name | Points/Weight | Category | Duration/Extent |
|---|---|---|---|
| written test (1) | 1 | written | 30 minutes |
| written test (2) | 1 | written | 30 minutes |
| written test (3) | 1 | written | 30 minutes |
Duration of the module
The following number of semesters is estimated for taking and completing the module: 1 semester(s).
This module can be started in the following semesters: Winter and summer semester.
Maximum number of participants
The maximum capacity of participants is 20.
Registration procedures
Registration of the Prüfungsäquivalenten Studienleistungen is with Prüfungsamt,
if applicable through online exam registration. Registration is required until one working day prior to the first exam component, at the latest until May 31st (summer term) or November 31st (winter term).
Registration for the couse:
https://www.dbta.tu-berlin.de/menue/studium_lehre/praktika_integrierte_veranstaltungen/ps1_p0/
if applicable through online exam registration. Registration is required until one working day prior to the first exam component, at the latest until May 31st (summer term) or November 31st (winter term).
Registration for the couse:
https://www.dbta.tu-berlin.de/menue/studium_lehre/praktika_integrierte_veranstaltungen/ps1_p0/
Recommended reading, lecture notes
Lecture notes
unavailable
Electronic lecture notes
available – see ISIS-course
Recommended literature
No recommended literature given
Assigned programs
This module version is used in the following programs:
| Program / program version | Semester(s) | Curriculum component |
|---|---|---|
| Energy Engineering and Process Engineering StuPO 2009 | SS 2025 | Rechnergestützte Methoden |
Miscellaneous
Not specified