Practical Exercises on Process Modeling (6 cp)Module description #31185 / Version 1
- 6 CP
- Portfolio examination
- Graded
- Winter and summer semester
- German
This module description is not valid in the current semester (Winter semester 2026/27).
Current version (v2)
| Module / Version | #31185 / #1 |
|---|---|
| Validity | Summer semester 2025 – Summer semester 2025 |
| Available language(s) | English, German |
| Credit points | 6 |
| Person responsible for the module | Repke, Jens-Uwe |
| Grading | Graded |
| Exam format | Portfolio examination |
| Language(s) of instruction | German |
Affiliation
| Faculty | Fakultät III |
|---|---|
| Institute | Institut für Prozess und Verfahrenstechnik |
| Academic chair | 33351500 FG Dynamik und Betrieb technischer Anlagen |
Contact
| Office | KWT 9 |
|---|---|
| Contact person | Hoffmann, Christian |
| E-mail address | lehre@dbta.tu-berlin.de |
| Website | https://www.tu.berlin/dbta/studium-lehre/lehrveranstaltungen-ii/computergestuetzte-uebungen-zur-prozessmodellierung |
Learning outcomes
The students:
- know the methods of modeling based on the basic module Process Modeling,
- are proficient in programming the software used in the course, such as Matlab or Python
- have the ability to develop in the field of computer-aided process modeling,
- have problem-solving skills and the ability to work in a team
- know the methods of modeling based on the basic module Process Modeling,
- are proficient in programming the software used in the course, such as Matlab or Python
- have the ability to develop in the field of computer-aided process modeling,
- have problem-solving skills and the ability to work in a team
Content
- Formulating and solving process engineering problems in software environments such as Matlab or Python
- Solving theoretical and programming tasks under supervision
- Transferring the models and algorithms from the Process Modeling I lecture into executable simulation programs
- Solving theoretical and programming tasks under supervision
- Transferring the models and algorithms from the Process Modeling I lecture into executable simulation programs
Module components
Compulsory area
The following courses are mandatory for this module:
| Courses | Type | Number | Frequency | Language | Hours per week | Course catalog |
|---|---|---|---|---|---|---|
| Prozessmodellierung | Internship | 0339 L 403 | Winter and summer semester | [de] | 4 | WS 2026/27 (1) ISIS |
Courses in the course catalog
Courses created from the teaching units of this module.
Winter semester 2026/27 (1)
Prozessmodellierung (Internship) 1
- Prozessmodellierung (Praktikum) Termingruppe 1 0339 L 403
Workload and credit points
Prozessmodellierung (Internship)
| Workload description | Multiplier | Hours | Total |
|---|---|---|---|
| Attendance | 15 | 4 h | 60 h |
| Pre/post processing | 15 | 2 h | 30 h |
| 90 h | |||
Course-independent workload
| Workload description | Multiplier | Hours | Total |
|---|---|---|---|
| Programming tasks | 15 | 6 h | 90 h |
| 90 h | |||
The workload of the module adds up to 180 hours. The module therefore comprises 6 credit points.
Description of teaching and learning methods
A theoretical introduction is used to motivate procedural problems and teach the theoretical principles for solving them.
Building on this theoretical content, the students then work on a sketch of their program code for the following week in a theoretical test.
During the test and also while working on the programming tasks, the students are supported by the teachers.
The theoretical tasks are completed alone, the programming tasks are completed in groups of 2-3 students. The PC pool of the research group is available for this purpose if required.
Building on this theoretical content, the students then work on a sketch of their program code for the following week in a theoretical test.
During the test and also while working on the programming tasks, the students are supported by the teachers.
The theoretical tasks are completed alone, the programming tasks are completed in groups of 2-3 students. The PC pool of the research group is available for this purpose if required.
Requirements for participation and examination
Desirable prerequisites for participation in the courses:
Recommended for Master's students.
Basic knowledge of multiphase thermodynamics is helpful.
Knowledge of process modeling and numerical methods for solving stationary and dynamic problems (contents of the lecture Process Modeling) is advantageous. It is possible to attend the course Process Modeling in parallel.
Basic knowledge of multiphase thermodynamics is helpful.
Knowledge of process modeling and numerical methods for solving stationary and dynamic problems (contents of the lecture Process Modeling) is advantageous. It is possible to attend the course Process Modeling in parallel.
Mandatory requirements for the module examination registration:
This module has no examination requirements.
Completion of the module
| Grading | Graded |
|---|---|
| Exam format | Portfolio examination |
| Type of portfolio examination | 100 points in total |
| Language | German |
Test elements
| Name | Points/Weight | Category | Duration/Extent |
|---|---|---|---|
| Programming tasks | 50 | written | 1-2 weeks per task |
| 3 Written tests | 50 | written | 30 minutes each |
Duration of the module
The following number of semesters is estimated for taking and completing the module: 1 semester(s).
This module can be started in the following semesters: Winter and summer semester.
Maximum number of participants
This module is not limited to a number of students.
Registration procedures
Registration for the portfolio examination via QISPOS or the MTS. Registration must be completed by one working day before the first examination.
Recommended reading, lecture notes
Lecture notes
unavailable
Electronic lecture notes
available – see ISIS-Course
Recommended literature
No recommended literature given
Assigned programs
This module version is used in the following programs:
| Program / program version | Semester(s) | Curriculum component |
|---|---|---|
| Sustainable Energy and Process Engineering StuPO 2024 | SS 2025 | Wahlpflichtmodule › Fachspezifische Wahlpflicht SEPE › Computational Methods |
Miscellaneous
Not specified