Computational Fluid Dynamics (CFD) in Process Engineering (6 LP)Module description #31189 / Version 1
- 6 CP
- Portfolio examination
- Graded
- Winter and summer semester
- English
This module description is not valid in the current semester (Winter semester 2026/27).
Current version (v2)
| Module / Version | #31189 / #1 |
|---|---|
| Validity | Winter semester 2025/26 – Summer semester 2026 |
| Available language(s) | English, German |
| Credit points | 6 |
| Person responsible for the module | Repke, Jens-Uwe |
| Grading | Graded |
| Exam format | Portfolio examination |
| Language(s) of instruction | English |
Affiliation
| Faculty | Fakultät III |
|---|---|
| Institute | Institut für Prozess und Verfahrenstechnik |
| Academic chair | 33351500 FG Dynamik und Betrieb technischer Anlagen |
Contact
| Office | KWT 9 |
|---|---|
| Contact person | Brösigke, Georg Tobias |
| E-mail address | lehre@dbta.tu-berlin.de |
| Website | https://www.tu.berlin/en/dbta/study/lectures-i/computational-fluid-dynamics-cfd-in-process-engineering |
Learning outcomes
Students
- know fundamental concepts of Computational Fluid Dynamics,
- are able to set up, run and evaluate the results of numerical simulations,
- can solve process engineering tasks by means of Computational Fluid Dynamics,
- have programming and modeling skills for flow simulations on continuum mechanics.
The course consists of
40 % Knowledge, 20 % Method, 40 % Application
- know fundamental concepts of Computational Fluid Dynamics,
- are able to set up, run and evaluate the results of numerical simulations,
- can solve process engineering tasks by means of Computational Fluid Dynamics,
- have programming and modeling skills for flow simulations on continuum mechanics.
The course consists of
40 % Knowledge, 20 % Method, 40 % Application
Content
- Introduction to Linux
- Introduction to partial differential equation systems and how to solve them
- Introduction to the finite Volume method (FVM)
- Installation and usage of OpenFOAM
- Mesh generation and pre-processing of simulations
- Running simulations and depict results
- Assessment of results
- Introduction to partial differential equation systems and how to solve them
- Introduction to the finite Volume method (FVM)
- Installation and usage of OpenFOAM
- Mesh generation and pre-processing of simulations
- Running simulations and depict results
- Assessment of results
Module components
Compulsory area
The following courses are mandatory for this module:
| Courses | Type | Number | Frequency | Language | Hours per week | Course catalog |
|---|---|---|---|---|---|---|
| Computational Fluid Dynamics (CFD) in der Verfahrenstechnik | Integrated course | 3515 L 005 | Winter and summer semester | [en] | 5 | ISIS |
Workload and credit points
Computational Fluid Dynamics (CFD) in der Verfahrenstechnik (Integrated course)
| Workload description | Multiplier | Hours | Total |
|---|---|---|---|
| Attendance | 10 | 7 h | 70 h |
| Pre/post processing | 10 | 2 h | 20 h |
| 90 h | |||
Course-independent workload
| Workload description | Multiplier | Hours | Total |
|---|---|---|---|
| Simulation project | 1 | 60 h | 60 h |
| Report | 1 | 30 h | 30 h |
| 90 h | |||
The workload of the module adds up to 180 hours. The module therefore comprises 6 credit points.
Description of teaching and learning methods
Lectures are provided with analytical and computational examples. In the computational examples, the theory is applied to a practical problem, and the methodical solution is demonstrated. Furthermore, the exercises can be completed independently on the group's own computer lab.
Requirements for participation and examination
Desirable prerequisites for participation in the courses:
This module is recommended for master's students in EVT, Sustainable Energy and Process Engineering, Chemical Engineering, Renewable Energy Systems, and Process Energy and Environmental Systems Engineering.
There are no formal prerequisites for participation. Basic programming knowledge, e.g., in Matlab/C++/Python, is desirable. Prior completion of the following courses is recommended:
- Analysis I and II and Linear Algebra for Engineers
- Numerical Methods for Engineers
- Fundamentals of Programming / Computer Science for Engineers
- Process Engineering I and II
There are no formal prerequisites for participation. Basic programming knowledge, e.g., in Matlab/C++/Python, is desirable. Prior completion of the following courses is recommended:
- Analysis I and II and Linear Algebra for Engineers
- Numerical Methods for Engineers
- Fundamentals of Programming / Computer Science for Engineers
- Process Engineering I and II
Mandatory requirements for the module examination registration:
This module has no examination requirements.
Completion of the module
| Grading | Graded |
|---|---|
| Exam format | Portfolio examination |
| Type of portfolio examination | 100 points in total |
| Language | English, German |
Test elements
| Name | Points/Weight | Category | Duration/Extent |
|---|---|---|---|
| Simulation project with written report | 80 | practical | 30 pages max. |
| Oral feedback discussion | 20 | oral | 20 minutes |
Duration of the module
The following number of semesters is estimated for taking and completing the module: 1 semester(s).
This module can be started in the following semesters: Winter and summer semester.
Maximum number of participants
The maximum capacity of participants is 22.
Registration procedures
To ensure available capacity in the PC pool, registration takes place two weeks before the start of the event via the MTS.
Recommended reading, lecture notes
Lecture notes
unavailable
Electronic lecture notes
unavailable
Recommended literature
- Computational Methods for Fluid Dynamics by Joel H. Ferziger, Milovan Perić, Robert L. Street https://doi.org/10.1007/978-3-319-99693-6 Softcover ISBN 978-3-319-99691-2
Assigned programs
This module version is used in the following programs:
| Program / program version | Semester(s) | Curriculum component |
|---|---|---|
| Chemical Engineering MSc_ChemIng_2020 | SS 2026 | Wahlpflichtmodule › Prozesstechnik |
| Process Energy and Environmental Systems Engineering StuPO 2022 | WS 2025/26 | Wahlpflichtmodule › Process Systems Engineering |
| SS 2026 | Wahlpflichtmodule › Process Systems Engineering | |
| Regenerative Energy Systems StuPO 2023 | WS 2025/26 | Wahlpflichtmodule › Computational Methods |
| SS 2026 | Wahlpflichtmodule › Computational Methods | |
| Sustainable Energy and Process Engineering StuPO 2024 | WS 2025/26 | Wahlpflichtmodule › Fachspezifische Wahlpflicht SEPE › Computational Methods |
| SS 2026 | Wahlpflichtmodule › Fachspezifische Wahlpflicht SEPE › Computational Methods |
Miscellaneous
Not specified