Additive manufacturing of metallic materialsModule description #31200 / Version 1
- 6 CP
- Written exam
- Graded
- Winter semester
- English
| Module / Version | #31200 / #1 |
|---|---|
| Validity | Since Winter semester 2025/26 |
| Available language(s) | English, German |
| Credit points | 6 |
| Person responsible for the module | Haase, Christian |
| Grading | Graded |
| Exam format | Written exam |
| Language(s) of instruction | English |
Affiliation
| Faculty | Fakultät III |
|---|---|
| Institute | Institut für Werkstoffwissenschaften und -technologien |
| Academic chair | 33341700 FG Materials for Additive Manufacturing |
Contact
| Office | BH-A3 |
|---|---|
| Contact person | Haase, Christian |
| E-mail address | christian.haase@tu-berlin.de |
| Website | https://www.tu.berlin/mfam |
Learning outcomes
In the module "Additive manufacturing of metallic materials" (DE: Additive Fertigung metallischer Werkstoffe), students acquire a solid understanding of additive manufacturing technologies. They learn to identify and evaluate the relationships between AM processes (Additive Manufacturing), microstructure development, and the resulting material properties. In addition to the primary manufacturing processes, relevant post-processing methods are also covered.
The course conveys:
40% Knowledge and Understanding
40% Analysis and Methodology
10% Application and Practice
10% Social Competence
The course conveys:
40% Knowledge and Understanding
40% Analysis and Methodology
10% Application and Practice
10% Social Competence
Content
-Motivation, additive manufacturing processes, and classes of materials
-Feedstock materials for the additive manufacturing process, their properties, determination, and evaluation of these properties
-Formation of material defects, their causes, and effects
-General microstructure and texture development during additive manufacturing and post-processing; influencing factors on the resulting microstructures and textures in additively manufactured materials
-Correlation between microstructure, texture, and properties of additively manufactured materials (steels, Al, Ni, Ti alloys, etc.)
-Simulation of material behavior during and after additive manufacturing
-Sustainability aspects
-Feedstock materials for the additive manufacturing process, their properties, determination, and evaluation of these properties
-Formation of material defects, their causes, and effects
-General microstructure and texture development during additive manufacturing and post-processing; influencing factors on the resulting microstructures and textures in additively manufactured materials
-Correlation between microstructure, texture, and properties of additively manufactured materials (steels, Al, Ni, Ti alloys, etc.)
-Simulation of material behavior during and after additive manufacturing
-Sustainability aspects
Module components
Compulsory area
The following courses are mandatory for this module:
| Courses | Type | Number | Frequency | Language | Hours per week | Course catalog |
|---|---|---|---|---|---|---|
| Additive manufacturing of metallic materials | Integrated course | 3417 L 001 | Winter semester | [en] | 4 | WS 2026/27 (1) ISIS |
Courses in the course catalog
Courses created from the teaching units of this module.
Winter semester 2026/27 (1)
Additive manufacturing of metallic materials (Integrated course) 1
- Additive manufacturing of metallic materials (Integrierte Veranstaltung) Termingruppe 1 3417 L 001
Workload and credit points
Additive manufacturing of metallic materials (Integrated course)
| Workload description | Multiplier | Hours | Total |
|---|---|---|---|
| Attendance | 15 | 4 h | 60 h |
| Preparation and follow-up | 15 | 6 h | 90 h |
| 150 h | |||
Course-independent workload
| Workload description | Multiplier | Hours | Total |
|---|---|---|---|
| Exam Preparation | 1 | 30 h | 30 h |
| 30 h | |||
The workload of the module adds up to 180 hours. The module therefore comprises 6 credit points.
Description of teaching and learning methods
Integrated courses (lecture, exercise, seminar)
Requirements for participation and examination
Desirable prerequisites for participation in the courses:
Knowledge of the fundamentals of materials science or materials engineering are desired.
Mandatory requirements for the module examination registration:
This module has no examination requirements.
Completion of the module
| Grading | Graded |
|---|---|
| Exam format | Written exam |
| Language | English, German |
| Duration/Extent | 90 minutes |
Duration of the module
The following number of semesters is estimated for taking and completing the module: 1 semester(s).
This module can be started in the following semesters: Winter semester.
Maximum number of participants
The maximum capacity of participants is 50.
Registration procedures
Registration for the exam is carried out in accordance with the applicable version of the AllgStuPO.
Registration for the exam is done online via QISPOS.
Registration for the exam is done online via QISPOS.
Recommended reading, lecture notes
Lecture notes
unavailable
Electronic lecture notes
unavailable
Recommended literature
No recommended literature given
Assigned programs
This module version is used in the following programs:
| Program / program version | Semester(s) | Curriculum component |
|---|---|---|
| Material Science and Engineering StuPO 2009 | SS 2026 | Vertiefungsmodule |
| WS 2026/27 | Vertiefungsmodule | |
| Material Science and Engineering Material Science and Engineering (M. Sc.) - StuPO 2024 | SS 2026 | Fachzspezifische Wahlpflicht › Natur- und ingenieurwissenschaftliche Aspekte der Materialwissenschaft und Werkstofftechnik › FG Materials for Additive Manufacturing |
| WS 2026/27 | Fachzspezifische Wahlpflicht › Natur- und ingenieurwissenschaftliche Aspekte der Materialwissenschaft und Werkstofftechnik › FG Materials for Additive Manufacturing |
Miscellaneous
Not specified