Introduction to Process Engineering with basic experiments (3 CP)Module description #31216 / Version 1
- 3 CP
- Portfolio examination
- Graded
- Winter semester
- English, German
| Module / Version | #31216 / #1 |
|---|---|
| Validity | Since Winter semester 2025/26 |
| Available language(s) | English, German |
| Credit points | 3 |
| Person responsible for the module | Kraume, Matthias |
| Grading | Graded |
| Exam format | Portfolio examination |
| Language(s) of instruction | English, German |
Affiliation
| Faculty | Fakultät III |
|---|---|
| Institute | Institut für Prozess und Verfahrenstechnik |
| Academic chair | 33351300 FG Verfahrenstechnik |
Contact
| Office | ACK 7 |
|---|---|
| Contact person | Böhm, Lutz |
| E-mail address | sekretariat@vt.tu-berlin.de |
| Website | http://www.tu.berlin/verfahrenstechnik |
Learning outcomes
Students should:
- know the basic and typical tasks of process engineering,
- be able to plan and carry out experiments and interpret the experimental results
and draw suitable conclusions from them,
- also be able to compare the results with known physical laws
- master aspects that are indispensable for laboratory work, such as care in carrying out experiments
error analysis and safety measures
- work together in small groups of 3-4 people
The course teaches:
20 % knowledge & understanding, 20 % analysis & methodology, 20 % research & evaluation
30 % application & practice, 10 % social skills
- know the basic and typical tasks of process engineering,
- be able to plan and carry out experiments and interpret the experimental results
and draw suitable conclusions from them,
- also be able to compare the results with known physical laws
- master aspects that are indispensable for laboratory work, such as care in carrying out experiments
error analysis and safety measures
- work together in small groups of 3-4 people
The course teaches:
20 % knowledge & understanding, 20 % analysis & methodology, 20 % research & evaluation
30 % application & practice, 10 % social skills
Content
Basic experiments such as
- viscosity measurements
- measurement of interfacial tension
- stirring experiments
- determination of residence time
Simple, universally applicable standard measurement methods are used on elementary experimental equipment.
- viscosity measurements
- measurement of interfacial tension
- stirring experiments
- determination of residence time
Simple, universally applicable standard measurement methods are used on elementary experimental equipment.
Module components
Compulsory area
The following courses are mandatory for this module:
| Courses | Type | Number | Frequency | Language | Hours per week | Course catalog |
|---|---|---|---|---|---|---|
| Einführung in die Verfahrenstechnik anhand grundlegender Experimente | Internship | 0331 L 023 | Winter semester | [de] | 2 | ISIS |
Workload and credit points
Einführung in die Verfahrenstechnik anhand grundlegender Experimente (Internship)
| Workload description | Multiplier | Hours | Total |
|---|---|---|---|
| Attendance time | 1 | 50 h | 50 h |
| Preparation/follow-up | 1 | 40 h | 40 h |
| 90 h | |||
The workload of the module adds up to 90 hours. The module therefore comprises 3 credit points.
Description of teaching and learning methods
The lab course is carried out in small groups, with students evaluating and recording experiments and comparing them with mathematical models independently.
Experimental setups with the corresponding measurement equipment are available in the department.
computer with suitable software are available for the evaluation of the experimentally obtained data.
Location of the course: Laboratory of the department at Ackerstr. 76
Experimental setups with the corresponding measurement equipment are available in the department.
computer with suitable software are available for the evaluation of the experimentally obtained data.
Location of the course: Laboratory of the department at Ackerstr. 76
Requirements for participation and examination
Desirable prerequisites for participation in the courses:
Basic knowledge of physics and chemistry
Desirable: successful completion of the courses Energy, Momentum and Mass Transfer II and Process Engineering I
Desirable: successful completion of the courses Energy, Momentum and Mass Transfer II and Process Engineering I
Mandatory requirements for the module examination registration:
This module has no examination requirements.
Completion of the module
| Grading | Graded |
|---|---|
| Exam format | Portfolio examination |
| Type of portfolio examination | 100 points in total |
| Language | German |
Test elements
| Name | Points/Weight | Category | Duration/Extent |
|---|---|---|---|
| Basics and knowledge test for the test setup | 10 | oral | ca. 15 min |
| Documented practical performance (report) | 75 | written | 30-50 pages per group |
| Test preparation and implementation | 15 | practical | ongoing during attendance time |
Duration of the module
The following number of semesters is estimated for taking and completing the module: 1 semester(s).
This module can be started in the following semesters: Winter semester.
Maximum number of participants
The maximum capacity of participants is 18.
Registration procedures
IMPORTANT for planning the lab course at the department
The first registration for the internship takes place online via a list of participants on the ISIS platform:
Procedure:
1) Provision of a pre-registration list via ISIS at the beginning of the semester by the department
2) Participation - those interested in the course register with full details.
Students register for the portfolio examination online via the MTS (Moses account)
1) Provision of the registration under the module no. in the MTS by the department
2) Participation - those interested in the course register with full details including email
3) If more than 18 students are registered, §48 para. 3 AllgStuPO applies.
4) Students who are not accepted will be informed and deregistered in the MTS
The deadlines/deadlines specified by the department apply to the registration procedure.
For further information see Website : www.tu.berlin/verfahrenstechnik
The first registration for the internship takes place online via a list of participants on the ISIS platform:
Procedure:
1) Provision of a pre-registration list via ISIS at the beginning of the semester by the department
2) Participation - those interested in the course register with full details.
Students register for the portfolio examination online via the MTS (Moses account)
1) Provision of the registration under the module no. in the MTS by the department
2) Participation - those interested in the course register with full details including email
3) If more than 18 students are registered, §48 para. 3 AllgStuPO applies.
4) Students who are not accepted will be informed and deregistered in the MTS
The deadlines/deadlines specified by the department apply to the registration procedure.
For further information see Website : www.tu.berlin/verfahrenstechnik
Recommended reading, lecture notes
Lecture notes
unavailable
Electronic lecture notes
available
Recommended literature
- Skript: Energie-, Impuls- und Stofftranport II
Assigned programs
This module version is used in the following programs:
| Program / program version | Semester(s) | Curriculum component |
|---|---|---|
| Erneuerbare Energien und Verfahrenstechnik StuPO 2025 | SS 2026 | Wahlpflichtbereich › Labor und Praxis |
| WS 2026/27 | Wahlpflichtbereich › Labor und Praxis |
Miscellaneous
Not specified