Electric Energy Networks II - Modeling and Simulation of TransientsModule description #40156 / Version 3
- 6 CP
- Portfolio examination
- Graded
- Winter semester
- English
This module description is not valid in the current semester (Winter semester 2026/27).
Current version (v6)
| Module / Version | #40156 / #3 |
|---|---|
| Validity | SS 2017 – WS 2018/19 |
| Available language(s) | English |
| Credit points | 6 |
| Person responsible for the module | Strunz, Kai |
| Grading | Graded |
| Exam format | Portfolio examination |
| Language(s) of instruction | English |
Affiliation
| Faculty | Fakultät IV |
|---|---|
| Institute | Institut für Energie und Automatisierungstechnik |
| Academic chair | 34312000 FG Energieversorgungsnetze und Integration Erneuerbarer Energien (SENSE) |
Contact
| Office | EMH 1 |
|---|---|
| Contact person | Strunz, Kai |
| E-mail address | kai.strunz@tu-berlin.de |
| Website | http://www.sense.tu-berlin.de/menue/studium_und_lehre/ |
Learning outcomes
The aim of the module "Electric Energy Networks II" is to deepen the knowledge on operation and behavior of
electrical energy supply grids. After successful completion of the module, the students will have an indepth
understanding of power system operation and control. Additionally, teamwork skills will be improved
through co-operation in small groups during the projects.
electrical energy supply grids. After successful completion of the module, the students will have an indepth
understanding of power system operation and control. Additionally, teamwork skills will be improved
through co-operation in small groups during the projects.
Content
Electrical grids are required for transmission and distribution of electrical power from generation to the
customer. Due to the rapid increase in renewable generation, the importance of the grids in system
integration is growing. This is the starting point of the module.
"Electric Energy Networks II - Modeling and Simulation of Transients" concentrates on dynamic
processes. These include traveling waves on transmission lines as well as switching processes in power
electronic converters and their influence on the grid. It will be shown how network currents and voltages
are represented during normal operation and in the case of a fault. The numeric methods for simulating
these processes will be discussed and models of networks reproduced on computer.
customer. Due to the rapid increase in renewable generation, the importance of the grids in system
integration is growing. This is the starting point of the module.
"Electric Energy Networks II - Modeling and Simulation of Transients" concentrates on dynamic
processes. These include traveling waves on transmission lines as well as switching processes in power
electronic converters and their influence on the grid. It will be shown how network currents and voltages
are represented during normal operation and in the case of a fault. The numeric methods for simulating
these processes will be discussed and models of networks reproduced on computer.
Module components
Compulsory area
The following courses are mandatory for this module:
| Courses | Type | Number | Frequency | Language | Hours per week | Course catalog |
|---|---|---|---|---|---|---|
| Electric Energy Networks II - Modeling and Simulation of Transients | Integrated course | 0430 L 502 | Winter semester | – | 4 | WS 2026/27 (1) ISIS |
Courses in the course catalog
Courses created from the teaching units of this module.
Winter semester 2026/27 (1)
Electric Energy Networks II - Modeling and Simulation of Transients (Integrated course) 1
- Computer Modeling, Simulation, and Control of Renewable Energy Systems (Integrierte Veranstaltung) 1. Termingruppe 0430 L 502
Workload and credit points
Electric Energy Networks II - Modeling and Simulation of Transients (Integrated course)
| Workload description | Multiplier | Hours | Total |
|---|---|---|---|
| 1 - Lecture time | 15 | 2 h | 30 h |
| 2 - Lecture preparation | 15 | 2 h | 30 h |
| 3 - Practice session time | 15 | 2 h | 30 h |
| 4 - Conduction practice session and project | 15 | 4 h | 60 h |
| 5 - Preparing for test | 1 | 30 h | 30 h |
| 180 h | |||
The workload of the module adds up to 180 hours. The module therefore comprises 6 credit points.
Description of teaching and learning methods
The material is covered through lectures, practice sessions and projects.
Requirements for participation and examination
Desirable prerequisites for participation in the courses:
Participation in the previous course Electric Energy Networks I
Mandatory requirements for the module examination registration:
This module has no examination requirements.
Completion of the module
| Grading | Graded |
|---|---|
| Exam format | Portfolio examination |
| Type of portfolio examination | 100 points in total |
| Language | English |
Test elements
| Name | Points/Weight | Category | Duration/Extent |
|---|---|---|---|
| (Deliverable assessment) Homework 1 | 6 | written | 3 hours |
| (Deliverable assessment) Homework 2 | 6 | written | 3 hours |
| (Deliverable assessment) Homework 3 | 6 | written | 3 hours |
| (Deliverable assessment) Project presentation | 10 | oral | 15 minutes |
| (Deliverable assessment) Project report | 32 | written | 20 hours |
| (Examination) Written test | 40 | written | 75 minutes |
Duration of the module
The following number of semesters is estimated for taking and completing the module: 1 semester(s).
This module can be started in the following semesters: Winter semester.
Maximum number of participants
This module is not limited to a number of students.
Registration procedures
Registration for the courses is not necessary.
Registration for the module takes place online via QISPOS.
Registration for the module takes place online via QISPOS.
Recommended reading, lecture notes
Lecture notes
unavailable
Electronic lecture notes
available – Course material available on webpage.
Recommended literature
No recommended literature given
Assigned programs
This module is not used in any program.
Miscellaneous
Not specified