Skip to content
Technische Universität Berlin Deutsch
Course catalog and module transfer system

Computer Modeling, Simulation, and Control of Renewable Energy SystemsModule description #40156 / Version 4

← Module page Deutsche Fassung
This module description is not valid in the current semester (Winter semester 2026/27). Current version (v6)
Module / Version#40156 / #4
ValiditySS 2019 – Summer semester 2021
Available language(s)English
Credit points6
Person responsible for the moduleStrunz, Kai
GradingGraded
Exam formatPortfolio examination
Language(s) of instructionEnglish

Affiliation

FacultyFakultät IV
InstituteInstitut für Energie und Automatisierungstechnik
Academic chair34312000 FG Energieversorgungsnetze und Integration Erneuerbarer Energien (SENSE)

Contact

OfficeEMH 1
Contact personStrunz, Kai
E-mail addresskai.strunz@tu-berlin.de
Websitehttp://www.sense.tu-berlin.de/menue/studium_und_lehre/

Learning outcomes

Energy systems are undergoing a profound and worldwide transformation. This can be rapidly recognized by considering some examples:

• Fossil-fuel-based power plants are being replaced by renewables, complemented by storage.
• The century-old battle of alternating current versus modern direct current solutions just makes a comeback.
• Power electronic converters dramatically increase the opportunities of high-speed control.
• Microgrids appear in the developing world for covering local needs such as cell phone charging and cooling; but simultaneously, there are already plans for a massive power grid spanning the entire globe.
• Synergies among technology sectors give rise to new concepts such as vehicle-to-grid or power-to-heat.

These are significant trends. Or are there even better alternatives? How do we make sure that the resulting systems are efficient and secure? What will happen if there is a fault? These and similar questions can only be answered if there are the right models for the computer-aided analysis and design of energy systems available. But what do we know about the availability of suitable models? One part of the answer is that there are some good tools with helpful models available. The other part of the answer is that there are many models missing and that the quality of specific existing models should be improved. In any case, knowledge on the computer modeling of renewable energy systems is very valuable and forward-looking. Engineers and scientists need such knowledge for informed decision making regarding the renewable energy systems of today and tomorrow. It is this kind of knowledge that the participants of the course will acquire.

Content

A particularly important part of the modeling is concerned with the analysis of the dynamic behavior of the energy systems. For this purpose, computer programs represent the dynamic state equations by their discrete counterparts through the application of numerical integration. Different numerical integration methods do exist, and those have different features and so give different results. For the correct usage of simulation tools, the basic knowledge of simulation methods is therefore extremely valuable. For this reason, the module begins with an introduction of this topic. It will become evident that the correct usage has significant implications on the quality of the solution. We will also discuss this in the context of real-time simulation for control system testing. Students will get to know the significance of simulation by developing an own small network simulator in the practice sessions.

Very insightful is the modeling of energy systems with very high shares of renewable power injection of 60 %, 80 %, or even 100 %. The given power electronics for converting DC into AC is then able to respond to faults und start system-wide control actions at very high speeds. Some of the known simulation techniques would give wrong results at such high shares of renewables. In the module, it is shown how to model these 100 % renewable energy systems correctly. Furthermore, it is investigated how new technologies such as power-to-heat can be integrated into the simulation, too.

Module components

Compulsory area

The following courses are mandatory for this module:

CoursesTypeNumberFrequencyLanguageHours per weekCourse catalog
Electric Energy Networks II - Modeling and Simulation of TransientsIntegrated course0430 L 502 Winter semester–4 ISIS

Courses in the course catalog

Courses created from the teaching units of this module.

Winter semester 2026/27 (1)

Electric Energy Networks II - Modeling and Simulation of Transients (Integrated course) 1

All groups of this course in the catalog

Workload and credit points

Electric Energy Networks II - Modeling and Simulation of Transients (Integrated course)

Workload descriptionMultiplierHoursTotal
1 - Lecture time152 h30 h
2 - Lecture preparation152 h30 h
3 - Practice session time152 h30 h
4 - Conduction practice session and project154 h60 h
5 - Preparing for test130 h30 h
180 h

The workload of the module adds up to 180 hours. The module therefore comprises 6 credit points.

Description of teaching and learning methods

The material is covered through lectures, practice sessions and projects.

Requirements for participation and examination

Desirable prerequisites for participation in the courses:

No preconditions.

Mandatory requirements for the module examination registration:

This module has no examination requirements.

Completion of the module

GradingGraded
Exam formatPortfolio examination
Type of portfolio examination100 points in total
LanguageEnglish

Test elements

NamePoints/WeightCategoryDuration/Extent
(Deliverable assessment) Homework 16written3 hours
(Deliverable assessment) Homework 26written3 hours
(Deliverable assessment) Homework 36written3 hours
(Deliverable assessment) Project report32written20 hours
(Deliverable assessment) Project presentation10oral15 minutes
(Examination) Written test40written75 minutes

Duration of the module

The following number of semesters is estimated for taking and completing the module: 1 semester(s).

This module can be started in the following semesters: Winter semester.

Maximum number of participants

The maximum capacity of participants is 30.

Registration procedures

Registration for the courses is not necessary.
Registration for the module takes place online via QISPOS.

Recommended reading, lecture notes

Lecture notes

available

Electronic lecture notes

available – Course material available on webpage.

Recommended literature

No recommended literature given

Assigned programs

This module version is used in the following programs:

Program / program versionSemester(s)Curriculum component
Industrial Engineering and Management
Industrial Engineering and Management (M. Sc.) - StuPO 2015
SS 2020Ingenieurwissenschaftliche Studienrichtungen/Engineering Majors › Elektrotechnik/Electrical Engineering (ET) › Elektrotechnik/Electrical Engineering (Wahlpflicht/Compulsory-Elective) › Electrical Power Engineering
WS 2020/21Ingenieurwissenschaftliche Studienrichtungen/Engineering Majors › Elektrotechnik/Electrical Engineering (ET) › Elektrotechnik/Electrical Engineering (Wahlpflicht/Compulsory-Elective) › Electrical Power Engineering
SS 2021Ingenieurwissenschaftliche Studienrichtungen/Engineering Majors › Elektrotechnik/Electrical Engineering (ET) › Elektrotechnik/Electrical Engineering (Wahlpflicht/Compulsory-Elective) › Electrical Power Engineering

Miscellaneous

Electrical engineering, industrial engineering, computer engineering, process engineering and others welcome