System-on-Chip (SOC) + ARM LabModule description #40224 / Version 6
- 9 CP
- Portfolio examination
- Graded
- Summer semester
- German
This module description is not valid in the current semester (Winter semester 2026/27).
| Module / Version | #40224 / #6 |
|---|---|
| Validity | Summer semester 2022 – Winter semester 2022/23 |
| Available language(s) | German |
| Credit points | 9 |
| Person responsible for the module | Gerfers, Friedel |
| Grading | Graded |
| Exam format | Portfolio examination |
| Language(s) of instruction | German |
Affiliation
| Faculty | Fakultät IV |
|---|---|
| Institute | Institut für Technische Informatik und Mikroelektronik |
| Academic chair | 34341200 FG Mixed Signal Circuit Design |
Contact
| Office | EN 4 |
|---|---|
| Contact person | Kaiser, Tobias Christian |
| E-mail address | friedel.gerfers@tu-berlin.de |
| Website | https://msc.tu-berlin.de |
Learning outcomes
After successful completion of this module, the students have gained advanced knowledge about the design of highly complex digital circuits and systems, especially Systems-on-Chip (SoC). Fields of knowledge include: fundamentals of complex SoC design, design flow, methods, IP reuse, hardware-software co-design, SoC architectures, real-time operating systems, ARM processor architectures, memory types and hierarchy, on-chip and off-chip bus systems (e. g. AXI), test and debug methods.
Furthermore, the students learn following practical skills in the project:
- Use of software tools to design complex digital hardware
- Navigating complex design flows for FPGA and IC development
- Extension of existing digital hardware projects, e. g. by peripheral module, bus components, interrupt sources, bus masters
- Assessment and evaluation of feasibility and implementation overhead of digital system project ideas
- Successive implementation of digital system project ideas: Specification, implementation, verification, demonstration using FPGA prototype
Furthermore, the students learn following practical skills in the project:
- Use of software tools to design complex digital hardware
- Navigating complex design flows for FPGA and IC development
- Extension of existing digital hardware projects, e. g. by peripheral module, bus components, interrupt sources, bus masters
- Assessment and evaluation of feasibility and implementation overhead of digital system project ideas
- Successive implementation of digital system project ideas: Specification, implementation, verification, demonstration using FPGA prototype
Content
This module covers advanced concepts and methods of digital hardware design and programming of Systems-on-Chip (SoC) and embedded systems. Contents of the lecture are especially: fundamentals of complex SoC design, design flow, methods, IP reuse, hardware-software co-design, SoC architectures, real-time operating systems, ARM processor architectures, memory types and hierarchy, on-chip and off-chip bus systems (e. g. AXI), test and debug methods.
In the project, groups of 3 - 4 students learn how to practically apply the lecture contents. The students learn to use complex digital design tools with a comprehensive design flow and hardware-software co-design. A FPGA prototype platform is employed. During the introductory phase, a series of exercise sheets is completed. In the second half of the semester, a self-defined project idea is implemented using the example system as a basis.
In the project, groups of 3 - 4 students learn how to practically apply the lecture contents. The students learn to use complex digital design tools with a comprehensive design flow and hardware-software co-design. A FPGA prototype platform is employed. During the introductory phase, a series of exercise sheets is completed. In the second half of the semester, a self-defined project idea is implemented using the example system as a basis.
Module components
Compulsory area
The following courses are mandatory for this module:
Workload and credit points
System-on-Chip - (ARM) Projekt (Project)
| Workload description | Multiplier | Hours | Total |
|---|---|---|---|
| Computer lab group work | 15 | 8 h | 120 h |
| Attendance | 15 | 2 h | 30 h |
| Pre/post processing | 15 | 2 h | 30 h |
| 180 h | |||
System-on-Chip - Entwurf und Programmierung (Lecture)
| Workload description | Multiplier | Hours | Total |
|---|---|---|---|
| Attendance | 15 | 2 h | 30 h |
| Pre/post processing | 15 | 4 h | 60 h |
| 90 h | |||
The workload of the module adds up to 270 hours. The module therefore comprises 9 credit points.
Description of teaching and learning methods
This module consists of a lecture part and a project part.
Requirements for participation and examination
Desirable prerequisites for participation in the courses:
We expect that our participants have already completed fundamental coursework in digital circuit design, computer / microprocessor architecture and software development.
The hardware description language VHDL is used throughout this course. This course does not focus on teaching basic VHDL language skills. Prior experience with Verilog or VHDL are therefore valuable. If you have no experience with hardware description languages, please expect that an increased learning effort will be required of you.
Prior experience with the programming language C is also highly recommended.
The hardware description language VHDL is used throughout this course. This course does not focus on teaching basic VHDL language skills. Prior experience with Verilog or VHDL are therefore valuable. If you have no experience with hardware description languages, please expect that an increased learning effort will be required of you.
Prior experience with the programming language C is also highly recommended.
Mandatory requirements for the module examination registration:
This module has no examination requirements.
Completion of the module
| Grading | Graded |
|---|---|
| Exam format | Portfolio examination |
| Type of portfolio examination | 100 points in total |
| Language | English, German |
Test elements
| Name | Points/Weight | Category | Duration/Extent |
|---|---|---|---|
| (Learning process review) 5 exercise sheets, 3 points each | 15 | practical | 1 week each |
| (Examination) Oral examination of lecture material | 40 | oral | 20 min |
| (Deliverable assessment) Project completion and documentation | 35 | practical | documentation approx. 20 pages |
| (Deliverable assessment) Project presentation | 10 | oral | 15 min per group |
Exam description
A functioning demonstration of the project idea on the FPGA prototyping platform is required to achieve more than 10 points in the examination component "project completion and documentation".
All points of "Prüfungselemente" will be added up.
All points of "Prüfungselemente" will be added up.
Duration of the module
The following number of semesters is estimated for taking and completing the module: 1 semester(s).
This module can be started in the following semesters: Summer semester.
Maximum number of participants
This module is not limited to a number of students.
Registration procedures
Enrollment in the ISIS course and attendance of the project session for group formation are required.
Recommended reading, lecture notes
Lecture notes
unavailable
Electronic lecture notes
available – Provided via ISIS
Recommended literature
- A. Chandrakasan, W. J. Bowhill, F. Fox; Design of High Performance Microprocessor Circuits¨, IEEE Press, 2001
- Frank Vahid, Tony Givargis; "Embedded System Design: A Unified Hardware/Software Introduction", John Wiley & Sons
- Steve Furber; "ARM System-on-Chip Architecture (2nd Edition)¨, Addison-Wesley Professional
- Walter Lange, Martin Bogdan, Thomas Schweizer, "Eingebettete Systeme: Entwurf, Modellierung und Synthese“, 412 Seiten, De Gruyter Oldenbourg 2015, ISBN-13: 978-3110290189
- Y. Taur, T. H. Ning; "Fundamentals of Modern VLSI Devices¨, Cambridge University Press, 1998
- „The Design Warrior's Guide to FPGAs: Devices, Tools and Flows”,558 Seiten, Newnes, 2004, ISBN-13: 978-0750676045
Assigned programs
This module version is used in the following programs:
| Program / program version | Semester(s) | Curriculum component |
|---|---|---|
| Industrial Engineering and Management Industrial Engineering and Management (M. Sc.) - StuPO 2015 | SS 2022 | Ingenieurwissenschaftliche Studienrichtungen/Engineering Majors › Informations- und Kommunikationssysteme/Information and Communication Systems (IKS) › Informations- und Kommunikationssysteme/Information and Communication Systems (Wahlpflicht/Compulsory-Elective) › Communication Systems |
| WS 2022/23 | Ingenieurwissenschaftliche Studienrichtungen/Engineering Majors › Informations- und Kommunikationssysteme/Information and Communication Systems (IKS) › Informations- und Kommunikationssysteme/Information and Communication Systems (Wahlpflicht/Compulsory-Elective) › Communication Systems |
Miscellaneous
Not specified