Electronics Project Course (9LP)Module description #40244 / Version 1
- 9 CP
- Portfolio examination
- Graded
- Winter and summer semester
- German
This module description is not valid in the current semester (Winter semester 2026/27).
| Module / Version | #40244 / #1 |
|---|---|
| Validity | WS 2015/16 – WS 2015/16 |
| Available language(s) | German |
| Credit points | 9 |
| Person responsible for the module | Orglmeister, Reinhold |
| Grading | Graded |
| Exam format | Portfolio examination |
| Language(s) of instruction | German |
Affiliation
| Faculty | Fakultät IV |
|---|---|
| Institute | Institut für Energie und Automatisierungstechnik |
| Academic chair | 34311900 FG Elektronische Systeme der Medizintechnik |
Contact
| Office | EN 3 |
|---|---|
| Contact person | Pielmus, Alexandru-Gabriel |
| E-mail address | lehre@emsp.tu-berlin.de |
| Website | http://www.emsp.tu-berlin.de/menue/studium_und_lehre/projekt_elektronik/ |
Learning outcomes
Die Studierenden haben die praktische Fähigkeit zur Entwicklung, zum Aufbau und zum Test systemelektronischer Baugruppen. Neben den fachlichen Inhalten spielen auch das Projektmanagement und die Teamarbeit eine wichtige Rolle.
The students possess the ability to design, simulate, layout and build complex electronic circuits. Apart from technological expertise project management and teamwork are developed.
The students possess the ability to design, simulate, layout and build complex electronic circuits. Apart from technological expertise project management and teamwork are developed.
Content
Gruppen von jeweils ca. acht Studierenden definieren sich ein eigenes Projekt zur Entwicklung einer Systemelektronischen Baugruppe oder eines Gerätes. Das Projekt wird in Arbeitspakete unterteilt, wobei auf Schnittstellenfestlegungen besonders zu achten ist. In Teamarbeit finded die Schaltungsentwicklung, der Aufbau und Test statt. Die Ergebnisse werden in einem Bericht dokumentiert und am Semesterende gemeinsam demonstriert.
Beispiele: EKG-Verstärker mit Auswertung, Körper-Monitoring-Gerät, digitaler Audioverstärker, etc.
A group of about eight students define an electronic project to be developed throughout the course. The project is divided in small work packages and interfaces are defined. These work packages are developed, build and tested in small teams. Finally, the whole project will be tested, documented and presented.
Example projects: ECG amplifier, body monitoring device, digital audio amplifier, etc.
Beispiele: EKG-Verstärker mit Auswertung, Körper-Monitoring-Gerät, digitaler Audioverstärker, etc.
A group of about eight students define an electronic project to be developed throughout the course. The project is divided in small work packages and interfaces are defined. These work packages are developed, build and tested in small teams. Finally, the whole project will be tested, documented and presented.
Example projects: ECG amplifier, body monitoring device, digital audio amplifier, etc.
Module components
Compulsory area
The following courses are mandatory for this module:
Workload and credit points
Freies betreutes Arbeiten zum Projekt Elektronik (Project)
| Workload description | Multiplier | Hours | Total |
|---|---|---|---|
| Nach/Vorbereitung | 15 | 4 h | 60 h |
| Präsenzzeit | 15 | 2 h | 30 h |
| 90 h | |||
Projekt Elektronik (Project)
| Workload description | Multiplier | Hours | Total |
|---|---|---|---|
| Präsenzzeit | 15 | 4 h | 60 h |
| Vor-/Nachbereitung | 15 | 4 h | 60 h |
| Vorbereitung der Projektdemonstration und Verfassen der Zwischen- und Abschlussberichte sowie des Abschlussvortrages | 1 | 60 h | 60 h |
| 180 h | |||
The workload of the module adds up to 270 hours. The module therefore comprises 9 credit points.
Description of teaching and learning methods
Das Modul wird in Form eines selbstdefinierten Projektes im Team mit ca. acht Studierenden durchgeführt. Die Anmeldung zur Modulprüfung erfolgt über QISPOS.
Requirements for participation and examination
Desirable prerequisites for participation in the courses:
Grundkenntnisse der Schaltungstechnik, Mikroprozessortechnik und Analog-und Digitalelektronik, z.B. durch die Module „Schaltungstechnik“ und „Elektronik mit Praktikum".
Mandatory requirements for the module examination registration:
This module has no examination requirements.
Completion of the module
| Grading | Graded |
|---|---|
| Exam format | Portfolio examination |
| Language | German |
Test elements
| Name | Points/Weight | Category | Duration/Extent |
|---|---|---|---|
| Protokollierte praktische Leistung | 70 | ||
| Schriftliche Ausarbeitung | 30 |
Exam description
Die Prüfungsform ist die Portfolioprüfung. Die Gesamtnote gemäß § 47 (2) AllgStuPO wird nach dem Notenschlüssel 2 der Fakultät IV ermittelt.
Duration of the module
The following number of semesters is estimated for taking and completing the module: 1 semester(s).
This module can be started in the following semesters: Winter and summer semester.
Maximum number of participants
The maximum capacity of participants is 20.
Registration procedures
Eine Anmeldung ist vor Semester (Vorlesungs-) beginn durch Eintragung im Sekretariat EN3 erforderlich.
Recommended reading, lecture notes
Lecture notes
unavailable
Electronic lecture notes
unavailable
Recommended literature
- Franco, S.: Design with Operational Amplifiers and Analog Integrated Circuits. McGraw Hill , 1998
- Tietze, U. Schenk, CH.: Halbleiter-Schaltungstechnik, Springer-Verlag, Berlin, 2002
- Weitere aktuelle Literaturhinweise erfolgen in der Lehrveranstaltung
Assigned programs
This module is not used in any program.
Miscellaneous
Not specified