Skip to content
Technische Universität Berlin Deutsch
Course catalog and module transfer system

Network protocol programming labModule description #40276 / Version 4

← Module page Deutsche Fassung
This module description is not valid in the current semester (Winter semester 2026/27).
Module / Version#40276 / #4
ValidityWS 2018/19 – Summer semester 2020
Available language(s)German
Credit points6
Person responsible for the moduleZubow, Anatolij
GradingGraded
Exam formatPortfolio examination
Language(s) of instructionGerman

Affiliation

FacultyFakultät IV
InstituteInstitut für Telekommunikationssysteme
Academic chair34331200 FG Telekommunikationsnetze

Contact

OfficeFT 5
Contact personRathke, Berthold
E-mail addresslehre@tkn.tu-berlin.de
Websitehttp://www.tkn.tu-berlin.de/teaching/

Learning outcomes

After visiting this module, deep skills in network protocol programming including handling of Linux based embedded systems and knowledge of the design of common wireless network controllers and their programming will be obtained. Attendees of this module will be in the position to realize principles of telecommunication protocol mechanisms in real world applications. The emphasis lies on the design of low level protocol mechanisms at the border between the physical and data link layer according to the ISO/OSI model.

Content

The structure of the module is formed by the "Protocol Programming Lab": Goal of this course is the development of protocol programming skills. A platform for programming embedded systems - a BeagleBone Black from Texas Instruments - will be provided to control a low power high performance wireless RF transceiver operating in the licence free 800 MHz band.

In a first step a programming environment setup must be created that consists of installing a Linux operating system and needed tools (e.g. compiler, linker) and also configuring and testing the operating system to be able to control the RF transceiver via the "Serial Peripheral Interface (SPI)", a very often used interface in embedded system applications.

After that, an API will be designed and implemented that enables access to the RF transceiver to control wireless channel parameters such as transmission power, frequency, modulation, bit-rate, etc. with the aim to transmit and receive protocol frames, which in turn enables the testing of the design of one of the following protocols:

* Development of a Bluetooth like self-configuring adhoc-network protocol.
* Development of IEEE 802.11 like procedures for rate control mechanisms to reduce frame losses.
* Development of protocols to introduce channel bonding for capacity increase or packet loss reduction.

One of the above protocols will be chosen. It is also possible for participants to extent this list.

Module components

Compulsory area

The following courses are mandatory for this module:

CoursesTypeNumberFrequencyLanguageHours per weekCourse catalog
Protocol Programming LabInternship0432 L 996 Summer semester–4 ISIS

Workload and credit points

Protocol Programming Lab (Internship)

Workload descriptionMultiplierHoursTotal
Assignments156 h90 h
Preparation and follow-up130 h30 h
Presence154 h60 h
180 h

The workload of the module adds up to 180 hours. The module therefore comprises 6 credit points.

Description of teaching and learning methods

This module is taught as a lab with regular assignments throughout the semester.

Requirements for participation and examination

Desirable prerequisites for participation in the courses:

BSc Module „Kommunikationsnetze“ or similar knowledge.

Mandatory requirements for the module examination registration:

This module has no examination requirements.

Completion of the module

GradingGraded
Exam formatPortfolio examination
Type of portfolio examination100 points in total
LanguageEnglish, German

Test elements

NamePoints/WeightCategoryDuration/Extent
(Deliverable assessment) 7 Lab Assignments60practical14h ongoing
(Examination) 2 Oral Consultations30oralà 30min
(Examination) Written Test10written<90min

Exam description

In total 100 Portfolio points can be obtained according to the table below.

The final module grade will be given according to the §47 (2) AllgStuPO, using grade scheme (Notenschlüssel) 2 of Faculty IV.

Duration of the module

The following number of semesters is estimated for taking and completing the module: 1 semester(s).

This module can be started in the following semesters: Summer semester.

Maximum number of participants

The maximum capacity of participants is 30.

Registration procedures

Examination Office/QISPOS.
For more information, visit: http://www.tkn.tu-berlin.de/?106675

Recommended reading, lecture notes

Lecture notes

unavailable

Electronic lecture notes

unavailable

Recommended literature

  • The full version of the IEEE 802.11-2007 Standard, available online (user type: student): http://standards.ieee.org/getieee802/download/802.11-2007.pdf

Assigned programs

This module version is used in the following programs:

Program / program versionSemester(s)Curriculum component
Industrial Engineering and Management
Industrial Engineering and Management (M. Sc.) - StuPO 2015
SS 2020Ingenieurwissenschaftliche Studienrichtungen/Engineering Majors › Informations- und Kommunikationssysteme/Information and Communication Systems (IKS) › Informations- und Kommunikationssysteme/Information and Communication Systems (Wahlpflicht/Compulsory-Elective) › Communication Systems

Miscellaneous

Not specified