Network Protocol Programming LabModule description #40276 / Version 6
- 6 CP
- Portfolio examination
- Graded
- Summer semester
- German
This module description is not valid in the current semester (Winter semester 2026/27).
| Module / Version | #40276 / #6 |
|---|---|
| Validity | Summer semester 2021 – Summer semester 2021 |
| Available language(s) | German |
| Credit points | 6 |
| Person responsible for the module | Dressler, Falko |
| Grading | Graded |
| Exam format | Portfolio examination |
| Language(s) of instruction | German |
Affiliation
| Faculty | Fakultät IV |
|---|---|
| Institute | Institut für Telekommunikationssysteme |
| Academic chair | 34331200 FG Telekommunikationsnetze |
Contact
| Office | FT 5 |
|---|---|
| Contact person | Rathke, Berthold |
| E-mail address | lehre@tkn.tu-berlin.de |
| Website | http://www.tkn.tu-berlin.de/teaching/ |
Learning outcomes
After visiting this module, deep skills in network protocol programming including handling of Linux based embedded systems and knowledge of the design of common wireless network controllers and their programming will be obtained. Attendees of this module will be in the position to realize principles of telecommunication protocol mechanisms in real world applications. The emphasis lies on the design of low level protocol mechanisms at the border between the physical and data link layer according to the ISO/OSI model.
Content
The structure of the module is formed by the "Protocol Programming Lab": Goal of this course is the development of protocol programming skills. A platform for programming embedded systems - a BeagleBone Black from Texas Instruments - will be provided to control a low power high performance wireless RF transceiver operating in the licence free 800 MHz band.
In a first step a programming environment setup must be created that consists of installing a Linux operating system and needed tools (e.g. compiler, linker) and also configuring and testing the operating system to be able to control the RF transceiver via the "Serial Peripheral Interface (SPI)", a very often used interface in embedded system applications.
After that, an API will be designed and implemented that enables access to the RF transceiver to control wireless channel parameters such as transmission power, frequency, modulation, bit-rate, etc. with the aim to transmit and receive protocol frames, which in turn enables the testing of the design of one of the following protocols:
* Development of a Bluetooth like self-configuring adhoc-network protocol.
* Development of IEEE 802.11 like procedures for rate control mechanisms to reduce frame losses.
* Development of protocols to introduce channel bonding for capacity increase or packet loss reduction.
One of the above protocols will be chosen. It is also possible for participants to extent this list.
In a first step a programming environment setup must be created that consists of installing a Linux operating system and needed tools (e.g. compiler, linker) and also configuring and testing the operating system to be able to control the RF transceiver via the "Serial Peripheral Interface (SPI)", a very often used interface in embedded system applications.
After that, an API will be designed and implemented that enables access to the RF transceiver to control wireless channel parameters such as transmission power, frequency, modulation, bit-rate, etc. with the aim to transmit and receive protocol frames, which in turn enables the testing of the design of one of the following protocols:
* Development of a Bluetooth like self-configuring adhoc-network protocol.
* Development of IEEE 802.11 like procedures for rate control mechanisms to reduce frame losses.
* Development of protocols to introduce channel bonding for capacity increase or packet loss reduction.
One of the above protocols will be chosen. It is also possible for participants to extent this list.
Module components
Compulsory area
The following courses are mandatory for this module:
| Courses | Type | Number | Frequency | Language | Hours per week | Course catalog |
|---|---|---|---|---|---|---|
| Protocol Programming Lab | Internship | 0432 L 996 | Summer semester | – | 4 | ISIS |
Workload and credit points
Protocol Programming Lab (Internship)
| Workload description | Multiplier | Hours | Total |
|---|---|---|---|
| Assignments | 15 | 6 h | 90 h |
| Preparation and follow-up | 1 | 30 h | 30 h |
| Presence | 15 | 4 h | 60 h |
| 180 h | |||
The workload of the module adds up to 180 hours. The module therefore comprises 6 credit points.
Description of teaching and learning methods
This module is taught as a lab with regular assignments throughout the semester.
Requirements for participation and examination
Desirable prerequisites for participation in the courses:
BSc Module „Kommunikationsnetze“ or similar knowledge.
Mandatory requirements for the module examination registration:
This module has no examination requirements.
Completion of the module
| Grading | Graded |
|---|---|
| Exam format | Portfolio examination |
| Type of portfolio examination | 100 points in total |
| Language | English, German |
Test elements
| Name | Points/Weight | Category | Duration/Extent |
|---|---|---|---|
| (Deliverable assessment) 7 Lab Assignments | 60 | practical | 14h ongoing |
| (Examination) 2 Oral Consultations | 30 | oral | à 30min |
| (Examination) Written Test | 10 | written | <90min |
Exam description
In total 100 Portfolio points can be obtained according to the table below.
The final module grade will be given according to the §47 (2) AllgStuPO, using grade scheme (Notenschlüssel) 2 of Faculty IV.
The final module grade will be given according to the §47 (2) AllgStuPO, using grade scheme (Notenschlüssel) 2 of Faculty IV.
Duration of the module
The following number of semesters is estimated for taking and completing the module: 1 semester(s).
This module can be started in the following semesters: Summer semester.
Maximum number of participants
The maximum capacity of participants is 30.
Registration procedures
Examination Office/QISPOS.
For more information, visit: http://www.tkn.tu-berlin.de/?106675
For more information, visit: http://www.tkn.tu-berlin.de/?106675
Recommended reading, lecture notes
Lecture notes
unavailable
Electronic lecture notes
unavailable
Recommended literature
No recommended literature given
Assigned programs
This module version is used in the following programs:
| Program / program version | Semester(s) | Curriculum component |
|---|---|---|
| Industrial Engineering and Management Industrial Engineering and Management (M. Sc.) - StuPO 2015 | SS 2021 | Ingenieurwissenschaftliche Studienrichtungen/Engineering Majors › Informations- und Kommunikationssysteme/Information and Communication Systems (IKS) › Informations- und Kommunikationssysteme/Information and Communication Systems (Wahlpflicht/Compulsory-Elective) › Communication Systems |
Miscellaneous
Not specified