High-speed Network Technologies with LabModule description #40279 / Version 3
- 6 CP
- Portfolio examination
- Graded
- Summer semester
- English
This module description is not valid in the current semester (Winter semester 2026/27).
| Module / Version | #40279 / #3 |
|---|---|
| Validity | WS 2018/19 – WS 2018/19 |
| Available language(s) | English |
| Credit points | 6 |
| Person responsible for the module | Zubow, Anatolij |
| Grading | Graded |
| Exam format | Portfolio examination |
| Language(s) of instruction | English |
Affiliation
| Faculty | Fakultät IV |
|---|---|
| Institute | Institut für Telekommunikationssysteme |
| Academic chair | 34331200 FG Telekommunikationsnetze |
Contact
| Office | FT 5 |
|---|---|
| Contact person | Woesner, Hagen |
| E-mail address | lehre@tkn.tu-berlin.de |
| Website | http://www.tu-berlin.de/?108249#40279 |
Learning outcomes
Within the last decade, telecommunication networks have undergone a huge transformation from voice to data transmission. This is reflected in a set of new protocols for data transmission as well as new control paradigms. Often these protocols are extensions of the well-known Ethernet and IP families that provide manageability, monitoring and reconfigurability. The advent of Software-Defined Networks (SDN) and Network Functions Virtualization (NFV) means that network operators require new programming skills to quickly understand and influence the behavior of a network under load or under attack.
Students completing this module will be familiar with Telecom network protocols ranging geographically from the home router to the core network.
They will be able to configure primary and backup paths, write applications for the Open Network Operating System (ONOS) network controller, and detect a mis-configured network device.
Students completing this module will be familiar with Telecom network protocols ranging geographically from the home router to the core network.
They will be able to configure primary and backup paths, write applications for the Open Network Operating System (ONOS) network controller, and detect a mis-configured network device.
Content
The goal of this course is to introduce the field of IP-based telecommunication networks. The focus of the course is on the lower layers of the protocol stack.
The integrated course consists of a lecture and parallel practical assignments.
The lecture introduces architecture and protocols of Telco networks such as
* Introduction to telecommunication network architecture: home router, access aggregation, BRAS/BNG, IPv6
* Optical networks introduction: survey of principles and characteristic products
* Ethernet fundamentals, Gigabit Ethernet, 10GE, 40GE, 100GEthernet (IEEE 802.3 standards)
* Control plane for Ethernet: the IEEE 802.1 family
* SONET/SDH: The voice-grade network. Circuit switching at the (very) large.
* (G)MPLS: Switching circuits under IP?
* SDN and OpenFlow: Towards white box switches and intelligent control planes
* Network config: When OpenFlow is not enough: ovsdb, OFConfig, netconf/yang.
* Programming the network: can I deploy my own firewall/cache/router?
The practical part will start from a network emulator (mininet) and OpenFlow controllers (Ryu, ONOS).
What is a soft switch? How does it work internally? We introduce white box switches and create our own applications that switch 10s of Gigabit/s
Linux network configuration via iproute2 as well as C, C++ and python skills are advantageous, but the assignments can adapt to the individual level of competence.
The integrated course consists of a lecture and parallel practical assignments.
The lecture introduces architecture and protocols of Telco networks such as
* Introduction to telecommunication network architecture: home router, access aggregation, BRAS/BNG, IPv6
* Optical networks introduction: survey of principles and characteristic products
* Ethernet fundamentals, Gigabit Ethernet, 10GE, 40GE, 100GEthernet (IEEE 802.3 standards)
* Control plane for Ethernet: the IEEE 802.1 family
* SONET/SDH: The voice-grade network. Circuit switching at the (very) large.
* (G)MPLS: Switching circuits under IP?
* SDN and OpenFlow: Towards white box switches and intelligent control planes
* Network config: When OpenFlow is not enough: ovsdb, OFConfig, netconf/yang.
* Programming the network: can I deploy my own firewall/cache/router?
The practical part will start from a network emulator (mininet) and OpenFlow controllers (Ryu, ONOS).
What is a soft switch? How does it work internally? We introduce white box switches and create our own applications that switch 10s of Gigabit/s
Linux network configuration via iproute2 as well as C, C++ and python skills are advantageous, but the assignments can adapt to the individual level of competence.
Module components
Compulsory area
The following courses are mandatory for this module:
Workload and credit points
High-speed Network Technologies (Lecture)
| Workload description | Multiplier | Hours | Total |
|---|---|---|---|
| 1. Presence | 15 | 2 h | 30 h |
| 2. Preparation and follow-up | 15 | 4 h | 60 h |
| 90 h | |||
Laboratory: SDN applications in High-speed Networks (Internship)
| Workload description | Multiplier | Hours | Total |
|---|---|---|---|
| 1. Presence | 15 | 2 h | 30 h |
| 2. Preparation and follow-up | 15 | 4 h | 60 h |
| 90 h | |||
The workload of the module adds up to 180 hours. The module therefore comprises 6 credit points.
Description of teaching and learning methods
VL: classical lecture.
PR: programming assignments
PR: programming assignments
Requirements for participation and examination
Desirable prerequisites for participation in the courses:
BSc module „Kommunikationsnetze” or similar knowledge. Knowledge of architecture and programming of network systems is of benefit.
Mandatory requirements for the module examination registration:
This module has no examination requirements.
Completion of the module
| Grading | Graded |
|---|---|
| Exam format | Portfolio examination |
| Type of portfolio examination | 100 points in total |
| Language | English |
Test elements
| Name | Points/Weight | Category | Duration/Extent |
|---|---|---|---|
| (Deliverable assessment) PR Laboratory - 7 Lab assignments, 2 points each | 14 | practical | 14h ongoing |
| (Examination) PR Final Laboratory - presentation | 18 | oral | 30min |
| (Examination) PR Laboratory - source code submission (via gitlab.tu-berlin.de) | 18 | practical | 100-500 Zeilen Phyton Code |
| (Examination) VL High-speed Network Technologies - oral consultation | 50 | oral | 30min |
Exam description
The final module grade will be given according to the §47 (2) AllgStuPO, using grade scheme (Notenschlüssel) 2 of Faculty IV.
Duration of the module
The following number of semesters is estimated for taking and completing the module: 1 semester(s).
This module can be started in the following semesters: Summer semester.
Maximum number of participants
The maximum capacity of participants is 20.
Registration procedures
Examination Office/ QISPOS
For more information, visit http://www.tkn.tu-berlin.de/?106675
For more information, visit http://www.tkn.tu-berlin.de/?106675
Recommended reading, lecture notes
Lecture notes
unavailable
Electronic lecture notes
unavailable
Recommended literature
No recommended literature given
Assigned programs
This module is not used in any program.
Miscellaneous
Not specified