Theory and Applications of Measurement and Diagnostic TechnologyModule description #40281 / Version 5
- 6 CP
- Portfolio examination
- Graded
- Winter and summer semester
- German
| Module / Version | #40281 / #5 |
|---|---|
| Validity | Since Winter semester 2024/25 |
| Available language(s) | German |
| Credit points | 6 |
| Person responsible for the module | Gühmann, Clemens |
| Grading | Graded |
| Exam format | Portfolio examination |
| Language(s) of instruction | German |
Affiliation
| Faculty | Fakultät IV |
|---|---|
| Institute | Institut für Energie und Automatisierungstechnik |
| Academic chair | 34311600 FG Elektronische Mess- und Diagnosetechnik |
Contact
| Office | EN 13 |
|---|---|
| Contact person | Beyer, Christine |
| E-mail address | clemens.guehmann@tu-berlin.de |
| Website | http://www.mdt.tu-berlin.de |
Learning outcomes
Students are able to do a literature research on a specific research topic, to summarize the results scientifically, to present and to defend their work.
By completing the project, students have in-depth practical knowledge in a selected field of technical diagnosis or modeling / simulation after completing the module. In addition, students can estimate the time and capacity required to complete the delineated tasks.
By completing the project, students have in-depth practical knowledge in a selected field of technical diagnosis or modeling / simulation after completing the module. In addition, students can estimate the time and capacity required to complete the delineated tasks.
Content
In the seminar Measurement and Diagnostic Technology (in English) lectures on new research results and trends in the fields of measurement and diagnostic technology, modeling and simulation will be prepared and held. The focus is on vehicle and engine technology.
In the course Small Project Simulation and Technical Diagnosis projects from current topics of the simulation of mechatronic systems, in particular in the field of automotive engineering and technical diagnostics, are processed. In the form of a specification, the basic requirements that must be met by the "product" to be realized are listed by the students. Subsequently, a project planning is to be carried out. Here, both a time and capacity planning with the appropriate distribution of tasks to perform. The planning must show the time load (workload) of the individual processor. After the release of the specifications by the supervisor and the planning, the independent problem solving and implementation of the task take place.
In the integrated course "Regulation and Control in Automotive Mechatronics", the focus is on the design of and control of mechatronic systems. The course has a lecture part in which the theory of design is taught. is taught. In the subsequent practical phase, a specific, real-life system (e.g. a throttle valve actuator) is used to design a model-based controller. controller is modelled, implemented on a microcontroller and then tested. The design process is model-based.
In the course Small Project Simulation and Technical Diagnosis projects from current topics of the simulation of mechatronic systems, in particular in the field of automotive engineering and technical diagnostics, are processed. In the form of a specification, the basic requirements that must be met by the "product" to be realized are listed by the students. Subsequently, a project planning is to be carried out. Here, both a time and capacity planning with the appropriate distribution of tasks to perform. The planning must show the time load (workload) of the individual processor. After the release of the specifications by the supervisor and the planning, the independent problem solving and implementation of the task take place.
In the integrated course "Regulation and Control in Automotive Mechatronics", the focus is on the design of and control of mechatronic systems. The course has a lecture part in which the theory of design is taught. is taught. In the subsequent practical phase, a specific, real-life system (e.g. a throttle valve actuator) is used to design a model-based controller. controller is modelled, implemented on a microcontroller and then tested. The design process is model-based.
Module components
Compulsory elective area
A selection of the following courses must be completed:
| Courses | Type | Number | Frequency | Language | Hours per week | Course catalog |
|---|---|---|---|---|---|---|
| Kleines Projekt Simulation und TD | Project | 0430 L 331 | Winter and summer semester | [de] | 2 | WS 2026/27 (1) ISIS |
| Regelung und Steuerung in der Kraftfahrzeugmechatronik | Integrated course | Winter semester | [de] | 2 | ISIS | |
| Seminar Mess- und Diagnosetechnik | Seminar | 0430 L 652 | Winter and summer semester | – | 2 | ISIS |
Courses in the course catalog
Courses created from the teaching units of this module.
Winter semester 2026/27 (1)
Kleines Projekt Simulation und TD (Project) 1
- Kleines Projekt Simulation und TD (Projekt) 1. Termingruppe 0430 L 331
Workload and credit points
Kleines Projekt Simulation und TD (Project)
| Workload description | Multiplier | Hours | Total |
|---|---|---|---|
| Bearbeitung / Durchführung | 1 | 65 h | 65 h |
| Dokumentation | 1 | 15 h | 15 h |
| Erarbeitung Präsentation | 1 | 5 h | 5 h |
| Projektplanung | 1 | 5 h | 5 h |
| 90 h | |||
Regelung und Steuerung in der Kraftfahrzeugmechatronik (Integrated course)
| Workload description | Multiplier | Hours | Total |
|---|---|---|---|
| Bearbeitung der Praktikumsaufgaben | 4 | 18 h | 72 h |
| Attendance | 9 | 2 h | 18 h |
| 90 h | |||
Seminar Mess- und Diagnosetechnik (Seminar)
| Workload description | Multiplier | Hours | Total |
|---|---|---|---|
| Ausarbeitung Präsentation | 1 | 10 h | 10 h |
| Literaturrecherche | 1 | 30 h | 30 h |
| Präsenzzeit | 7 | 2 h | 14 h |
| schriftliche Ausarbeitung | 1 | 36 h | 36 h |
| 90 h | |||
The workload of the module adds up to 270 hours. The module therefore comprises 6 credit points.
Description of teaching and learning methods
Seminar (SE): At the beginning of the semester the topics are handed out to the students. On the basis of current publications, the state of the art will be developed, summarized in writing and finally a lecture will be given.
Project (PJ): independent solution of a technical problem in group work
Project (PJ): independent solution of a technical problem in group work
Requirements for participation and examination
Desirable prerequisites for participation in the courses:
Knowledge in the fields of modeling, pattern recognition or technical diagnostics
Mandatory requirements for the module examination registration:
This module has no examination requirements.
Completion of the module
| Grading | Graded |
|---|---|
| Exam format | Portfolio examination |
| Type of portfolio examination | 100 points per element |
| Language | English, German |
Test elements
| Name | Points/Weight | Category | Duration/Extent |
|---|---|---|---|
| (Ergebnisprüfung) IV Bewertung der Protokolle zu den Praktikumsaufgaben | 50 | written | begleitend |
| (Ergebnisprüfung) PJ Abschlusspräsentation | 5 | oral | 20 min Vortrag - 10 min Fragen |
| (Ergebnisprüfung) PJ Entwickelte Hardware/Software | 20 | practical | 65 Stunden |
| (Ergebnisprüfung) PJ schriftliche Ausarbeitung/Dokumentation | 20 | written | max. 15 Seiten Inhalt pro Person |
| (Ergebnisprüfung) SE Seminar Mess- und Diagnosetechnik - Schriftliche Ausarbeitung | 40 | written | 20 Seiten |
| (Ergebnisprüfung) SE Seminar Mess- und Diagnosetechnik - Vortrag | 10 | oral | 20 min Vortrag - 10 min Fragen |
| (Lernprozessevaluation) PJ Projektplanung | 5 | practical | begleitend |
Duration of the module
The following number of semesters is estimated for taking and completing the module: 1 semester(s).
This module can be started in the following semesters: Winter and summer semester.
Maximum number of participants
The maximum capacity of participants is 20.
Registration procedures
The offered projects will be presented in the first week of lectures (see course catalog) and subsequently registered.
See also http://www.mdt.tu-berlin.de
The seminar is registered via https://www.mdt.tu-berlin.de/menue/lehre/seminar_mess_und_diagnosetechnik/
See also http://www.mdt.tu-berlin.de
The seminar is registered via https://www.mdt.tu-berlin.de/menue/lehre/seminar_mess_und_diagnosetechnik/
Recommended reading, lecture notes
Lecture notes
unavailable
Electronic lecture notes
unavailable
Recommended literature
No recommended literature given
Assigned programs
This module version is used in the following programs:
| Program / program version | Semester(s) | Curriculum component |
|---|---|---|
| Automotive Systems Automotive Systems (M. Sc.) - StuPO 2017 | SS 2025 | Wahlpflichtbereich |
| WS 2025/26 | Wahlpflichtbereich | |
| SS 2026 | Wahlpflichtbereich | |
| WS 2026/27 | Wahlpflichtbereich |
Miscellaneous
Not specified