Ad-hoc and Sensor NetworksModule description #40304 / Version 2
- 6 CP
- Portfolio examination
- Graded
- Winter semester
- English
This module description is not valid in the current semester (Winter semester 2026/27).
Current version (v11)
| Module / Version | #40304 / #2 |
|---|---|
| Validity | WS 2014/15 – WS 2014/15 |
| Available language(s) | English |
| Credit points | 6 |
| Person responsible for the module | Wolisz, Adam |
| Grading | Graded |
| Exam format | Portfolio examination |
| Language(s) of instruction | English |
Affiliation
| Faculty | Fakultät IV |
|---|---|
| Institute | Institut für Telekommunikationssysteme |
| Academic chair | 34331200 FG Telekommunikationsnetze |
Contact
| Office | FT 5 |
|---|---|
| Contact person | Dressler, Falko |
| E-mail address | lehre@tkn.tu-berlin.de |
| Website | https://www.tkn.tu-berlin.de/teaching/nes/ |
Learning outcomes
Students completing the module will gain the understanding of basic principles and technologies behind self-organizing wireless sensor networks, through a balanced combination of lectures and practical work with modern sensor node hardware.
The module provides: 40% technical skills, 20% method skills, 30% system skills, and 10% social skills.
The module provides: 40% technical skills, 20% method skills, 30% system skills, and 10% social skills.
Content
Ad-hoc and Sensor Networks: Sensor networks differ from "traditional" wireless networks in several aspects, most importantly in their resource constrained nature. The sensor nodes are typically severely restricted in terms of memory, processing capacity and energy budget leading to the need for careful design of the node system software and protocol stack. These novel system solutions, driven by the specific nature of the sensor networks as a platform, are the focus of our interest in this course. Individual lecture units include: Introduction, application areas and system requirements; System architecture (node-level, network-level, software support); Protocol stack (physical layer, link layer, medium access control and routing); Services (addressing, topology control, time synchronization and localization).
Sensor Networks Lab: The lab provides opportunity for gaining hands-on experience in working with state-of-the-art sensor networks hardware and software. Sensor nodes will be made available not only for in-class assignments but also for developing experiments at home. The lab consists of a "bootcamp" event and six additional sessions. In the "bootcamp" the TinyOS development toolchain is installed and tested with simple demo applications. The following lab sessions are devoted to particular aspects of sensor network hardware and software stack like sensing, actuation, IPv6-based networking, etc. The lab ends with group mini-project work.
More information is available on the web page (see Recommended Reading, Lecture Notes).
Sensor Networks Lab: The lab provides opportunity for gaining hands-on experience in working with state-of-the-art sensor networks hardware and software. Sensor nodes will be made available not only for in-class assignments but also for developing experiments at home. The lab consists of a "bootcamp" event and six additional sessions. In the "bootcamp" the TinyOS development toolchain is installed and tested with simple demo applications. The following lab sessions are devoted to particular aspects of sensor network hardware and software stack like sensing, actuation, IPv6-based networking, etc. The lab ends with group mini-project work.
More information is available on the web page (see Recommended Reading, Lecture Notes).
Module components
Compulsory area
The following courses are mandatory for this module:
Workload and credit points
Ad-hoc and Sensor Networks (Lecture)
| Workload description | Multiplier | Hours | Total |
|---|---|---|---|
| 1. Presence | 15 | 2 h | 30 h |
| 2. Preparation and follow-up | 1 | 40 h | 40 h |
| 3. Exam Preparation | 1 | 20 h | 20 h |
| 90 h | |||
Sensor Networks Lab (Internship)
| Workload description | Multiplier | Hours | Total |
|---|---|---|---|
| 1. Presence | 15 | 2 h | 30 h |
| 2. Preparation and follow-up | 1 | 40 h | 40 h |
| 3. Exam Preparation | 1 | 20 h | 20 h |
| 90 h | |||
The workload of the module adds up to 180 hours. The module therefore comprises 6 credit points.
Description of teaching and learning methods
VL: classical lecture.
PR: programming assignments; sensor node hardware is made available to the students (lent for the duration of the lab).
PR: programming assignments; sensor node hardware is made available to the students (lent for the duration of the lab).
Requirements for participation and examination
Desirable prerequisites for participation in the courses:
BSc module „Kommunikationsnetze” or similar knowledge is required. Knowledge of architecture and programming of embedded systems is of benefit.
Mandatory requirements for the module examination registration:
This module has no examination requirements.
Completion of the module
| Grading | Graded |
|---|---|
| Exam format | Portfolio examination |
| Language | English |
Test elements
| Name | Points/Weight | Category | Duration/Extent |
|---|---|---|---|
| PR - exam covering sensor network lab | 20 | ||
| PR - sensor networks lab assignments | 20 | ||
| PR - sensor networks lab group mini-project | 10 | ||
| VL - exam covering the lecture | 50 |
Exam description
In total 100 Portfolio points can be obtained. The final module grade will be given according to the §47 (2) AllgStuPO, using grade scheme (Notenschlüssel) 2 of Faculty IV. The individual grades will be obtained as specified in the table below.
VL Ad-hoc- and Sensor Networks: depending on the number of students an oral exam takes place for up to 12 students, otherwise the exam is written.
VL Ad-hoc- and Sensor Networks: depending on the number of students an oral exam takes place for up to 12 students, otherwise the exam is written.
Duration of the module
The following number of semesters is estimated for taking and completing the module: 1 semester(s).
This module can be started in the following semesters: Winter semester.
Maximum number of participants
The maximum capacity of participants is 25.
Registration procedures
Exam enrolment: Examination Office/QISPOS
For more information, visit: http://www.tkn.tu-berlin.de/?106675
For more information, visit: http://www.tkn.tu-berlin.de/?106675
Recommended reading, lecture notes
Lecture notes
unavailable
Electronic lecture notes
available – Lecture slides available at ISIS2 webpage.
Recommended literature
- Dominique Paret, Multiplexed Networks for Embedded Systems: CAN, LIN, FlexRay, Safe by Wire, Wiley & Sons, Chichester, UK, 2007
- Gregory Pottie and William Kaiser, Principles of Embedded Networked Systems Design, Cambridge University Press, Cambridge, 2005
- Holger Karl and Andreas Willig, Protocols and Architectures for Wireless Sensor Networks, Wiley, Chichester, 2005
- Richard Zurawski, Embedded Systems Handbook, Second Edition: Networked Embedded Systems, CRC Press, 2009
Assigned programs
This module is not used in any program.
Miscellaneous
Not specified