Ad-hoc and Sensor NetworksModule description #40304 / Version 8
- 6 CP
- Portfolio examination
- Graded
- Winter semester
- English
This module description is not valid in the current semester (Winter semester 2026/27).
Current version (v11)
| Module / Version | #40304 / #8 |
|---|---|
| Validity | WS 2018/19 – Summer semester 2020 |
| Available language(s) | English |
| Credit points | 6 |
| Person responsible for the module | Zubow, Anatolij |
| Grading | Graded |
| Exam format | Portfolio examination |
| Language(s) of instruction | English |
Affiliation
| Faculty | Fakultät IV |
|---|---|
| Institute | Institut für Telekommunikationssysteme |
| Academic chair | 34331200 FG Telekommunikationsnetze |
Contact
| Office | FT 5 |
|---|---|
| Contact person | Dressler, Falko |
| E-mail address | lehre@tkn.tu-berlin.de |
| Website | https://www.tkn.tu-berlin.de/teaching/nes/ |
Learning outcomes
Students completing the module will gain the understanding of basic principles and technologies behind self-organizing wireless sensor networks, through a balanced combination of lectures and practical work with modern sensor node hardware.
Content
Ad-hoc and Sensor Networks: Sensor networks differ from "traditional" wireless networks in several aspects, most importantly in their resource constrained nature. The sensor nodes are typically severely restricted in terms of memory, processing capacity and energy budget leading to the need for careful design of the node system software and protocol stack. These novel system solutions, driven by the specific nature of the sensor networks as a platform, are the focus of our interest in this course. Individual lecture units include: Introduction, application areas and system requirements; System architecture (node-level, network-level, software support); Protocol stack (physical layer, link layer, medium access control and routing); Services (addressing, topology control, time synchronization and localization).
Sensor Networks Lab: The lab provides opportunity for gaining hands-on experience in working with state-of-the-art sensor networks hardware and software. Sensor nodes will be made available not only for in-class assignments but also for developing experiments at home. The lab consists of a "bootcamp" event and six additional sessions. In the "bootcamp" the TinyOS development toolchain is installed and tested with simple demo applications. The following lab sessions are devoted to particular aspects of sensor network hardware and software stack like sensing, actuation, IPv6-based networking, etc. The lab ends with group mini-project work.
More information is available on the web page (see Recommended Reading, Lecture Notes).
Sensor Networks Lab: The lab provides opportunity for gaining hands-on experience in working with state-of-the-art sensor networks hardware and software. Sensor nodes will be made available not only for in-class assignments but also for developing experiments at home. The lab consists of a "bootcamp" event and six additional sessions. In the "bootcamp" the TinyOS development toolchain is installed and tested with simple demo applications. The following lab sessions are devoted to particular aspects of sensor network hardware and software stack like sensing, actuation, IPv6-based networking, etc. The lab ends with group mini-project work.
More information is available on the web page (see Recommended Reading, Lecture Notes).
Module components
Compulsory area
The following courses are mandatory for this module:
Workload and credit points
Ad-hoc and Sensor Networks (Lecture)
| Workload description | Multiplier | Hours | Total |
|---|---|---|---|
| 1. Presence | 15 | 2 h | 30 h |
| 2. Preparation and follow-up | 1 | 40 h | 40 h |
| 3. Exam Preparation | 1 | 20 h | 20 h |
| 90 h | |||
Sensor Networks Lab (Internship)
| Workload description | Multiplier | Hours | Total |
|---|---|---|---|
| 1. Presence | 15 | 2 h | 30 h |
| 2. Preparation and follow-up | 1 | 40 h | 40 h |
| 3. Exam Preparation | 1 | 20 h | 20 h |
| 90 h | |||
The workload of the module adds up to 180 hours. The module therefore comprises 6 credit points.
Description of teaching and learning methods
VL: classical lecture.
PR: programming assignments; sensor node hardware is made available to the students (lent for the duration of the lab).
PR: programming assignments; sensor node hardware is made available to the students (lent for the duration of the lab).
Requirements for participation and examination
Desirable prerequisites for participation in the courses:
BSc module „Kommunikationsnetze” or similar knowledge is required. Knowledge of architecture and programming of embedded systems is of benefit.
Mandatory requirements for the module examination registration:
This module has no examination requirements.
Completion of the module
| Grading | Graded |
|---|---|
| Exam format | Portfolio examination |
| Type of portfolio examination | 100 points in total |
| Language | English |
Test elements
| Name | Points/Weight | Category | Duration/Extent |
|---|---|---|---|
| PR Sensor Networks Lab - 7 Lab assignments, 3 points each (Deliverable assessment) | 21 | practical | 7x (90 + 90) min |
| PR Sensor Networks Lab - Final lab review (Learning process review) | 20 | written | 45 min |
| PR Sensor Networks Lab - Project demo (Deliverable assessment) | 5 | oral | 30 min |
| PR Sensor Networks Lab - Project presentation (Deliverable assessment) | 4 | oral | 30 min |
| VL Ad-hoc and Sensor Networks - Final lecture written test (Examination) | 50 | written | 90 min |
Exam description
In total 100 Portfolio points can be obtained. The final module grade will be given according to the §47 (2) AllgStuPO, using grade scheme (Notenschlüssel) 2 of Faculty IV. The individual grades will be obtained as specified in the table below.
Further details:
VL: Final lecture written test: The students take part in a < 90 min final test that checks the overall level of acquired knowledge from the Ad Hoc and Sensor Networks lecture.
PR: Lab assignments: Organized in small groups (3-4 persons), the students are asked to jointly absolve a set of lab assignments that involve in-class programming assignments using state of the art sensor network hardware and software, and homework tasks (some of them individually, some of them as a group). Evaluated is the correctness of the provided answers, the correctness and the quality of the code for the programming assignments. Each lab is assessed with a three-level scale: not-satisfactory, satisfactory and excellent.
PR: Final lab project: After the completion of the individual lab assignments, the lab groups are asked to design, develop and demonstrate a relatively simple but complete sensor networks application that involves data acquisition, processing and communication. Evaluated is the final "project presentation" (quality of the content and coverage, presentation organization and style, capability to answer follow-up questions), and the "project demo" (general functionality, achievement of design goals, effective use of HW and SW, team work, code quality, documentation, effective use of version control tools).
PR: Final lab review: The students take part in a final review that checks the overall level of acquired knowledge from the Sensor Networks Lab. Evaluated is the familiarity with the Lab HW and SW and the familiarity with the the solutions of the individual Lab assignments.
Students are asked to self-evaluate the relative contribution of each team member as part of the team, which is considered in the formation of the final individual marks.
Further details:
VL: Final lecture written test: The students take part in a < 90 min final test that checks the overall level of acquired knowledge from the Ad Hoc and Sensor Networks lecture.
PR: Lab assignments: Organized in small groups (3-4 persons), the students are asked to jointly absolve a set of lab assignments that involve in-class programming assignments using state of the art sensor network hardware and software, and homework tasks (some of them individually, some of them as a group). Evaluated is the correctness of the provided answers, the correctness and the quality of the code for the programming assignments. Each lab is assessed with a three-level scale: not-satisfactory, satisfactory and excellent.
PR: Final lab project: After the completion of the individual lab assignments, the lab groups are asked to design, develop and demonstrate a relatively simple but complete sensor networks application that involves data acquisition, processing and communication. Evaluated is the final "project presentation" (quality of the content and coverage, presentation organization and style, capability to answer follow-up questions), and the "project demo" (general functionality, achievement of design goals, effective use of HW and SW, team work, code quality, documentation, effective use of version control tools).
PR: Final lab review: The students take part in a final review that checks the overall level of acquired knowledge from the Sensor Networks Lab. Evaluated is the familiarity with the Lab HW and SW and the familiarity with the the solutions of the individual Lab assignments.
Students are asked to self-evaluate the relative contribution of each team member as part of the team, which is considered in the formation of the final individual marks.
Duration of the module
The following number of semesters is estimated for taking and completing the module: 1 semester(s).
This module can be started in the following semesters: Winter semester.
Maximum number of participants
The maximum capacity of participants is 25.
Registration procedures
Exam enrolment: Examination Office/QISPOS
For more information, visit: http://www.tkn.tu-berlin.de/?106675
For more information, visit: http://www.tkn.tu-berlin.de/?106675
Recommended reading, lecture notes
Lecture notes
unavailable
Electronic lecture notes
available – Lecture slides available at ISIS2 webpage.
Recommended literature
- Dominique Paret, Multiplexed Networks for Embedded Systems: CAN, LIN, FlexRay, Safe by Wire, Wiley & Sons, Chichester, UK, 2007
- Gregory Pottie and William Kaiser, Principles of Embedded Networked Systems Design, Cambridge University Press, Cambridge, 2005
- Holger Karl and Andreas Willig, Protocols and Architectures for Wireless Sensor Networks, Wiley, Chichester, 2005
- Richard Zurawski, Embedded Systems Handbook, Second Edition: Networked Embedded Systems, CRC Press, 2009
Assigned programs
This module version is used in the following programs:
| Program / program version | Semester(s) | Curriculum component |
|---|---|---|
| Industrial Engineering and Management Industrial Engineering and Management (M. Sc.) - StuPO 2015 | SS 2020 | Ingenieurwissenschaftliche Studienrichtungen/Engineering Majors › Informations- und Kommunikationssysteme/Information and Communication Systems (IKS) › Informations- und Kommunikationssysteme/Information and Communication Systems (Wahlpflicht/Compulsory-Elective) › Embedded Systems and Computer Architectures |
Miscellaneous
Not specified