Skip to content
Technische Universität Berlin Deutsch
Course catalog and module transfer system

MechatronicModule description #40553 / Version 7

← Module page Deutsche Fassung
This module description is not valid in the current semester (Winter semester 2026/27).
Module / Version#40553 / #7
ValiditySummer semester 2020 – Summer semester 2020
Available language(s)German
Credit points12
Person responsible for the moduleGühmann, Clemens
GradingGraded
Exam formatWritten exam
Language(s) of instructionGerman

Affiliation

FacultyFakultät IV
InstituteInstitut für Energie und Automatisierungstechnik
Academic chair34311600 FG Elektronische Mess- und Diagnosetechnik

Contact

OfficeEN 13
Contact personBeyer, Christine
E-mail addressclemens.guehmann@tu-berlin.de
Websitehttp://www.mdt.tu-berlin.de

Learning outcomes

Students have an overview on the field of modeling and technical diagnostics and are able to independently work out solutions for the core
tasks control and diagnostics of mechatronic components (in the motor vehicle) according to scientific methods.

Content

The lecture "modeling and real-time simulation" (Modellbildung und Echtzeitsimulation) initially gives an introduction to the application of
simulation in order to subsequently teach the methods and tools for modeling. The areas of diagnostics, control and regulation shall apply
as an application in the simulation. For the simulation, the basics of Simulink and Modelica are taught.

The lecture "Pattern Recognition and Technical Diagnostics" (Musterkennung und Technische Diagnose) teaches the basics of statistical
pattern recognition. Subsequently, classification and pattern recognition methods (machine learning) as well as modern model-based
diagnostic methods for mechatronic systems are discussed.

The lab "Pattern Recognition and Technical Diagnostics" (Praktikum Mustererkennung und Technische Diagnose) deepens the contents of the lecture "Pattern Recognition and Technical Diagnostics" (module Simulation and Technical Diagnostics), where practical problems are solved: classification of electric motors.

The lab "Modeling and ECU optimization in Automobile Electronics" (Praktikum Modellbildung und Steuergeräteoptimierung in der Automobilelektronik) focuses on the use of models in the optimization process of automotive ECUs. A data based model of an internal combustion engine is generated, in order to optimize engine maps with regard to exhaust emissions. Additionally, engine components are modeled and a controller is developed by software-in-the-loop simulation.

Module components

Compulsory area

The following courses are mandatory for this module:

CoursesTypeNumberFrequencyLanguageHours per weekCourse catalog
Modellbildung und Simulation mechatronischer SystemeLecture0430 L 318 Winter semester[de]2 ISIS
Modellbildung und Steuergeräteoptimierung in der AutomobilelektronikInternship0430 L 322 Winter semester[de]2 ISIS
Mustererkennung und Technische DiagnoseInternship0430 L 341 Summer semester–2 ISIS
Mustererkennung und Technische DiagnoseLecture0430 L 343 Summer semester–2 ISIS

Workload and credit points

Modellbildung und Simulation mechatronischer Systeme (Lecture)

Workload descriptionMultiplierHoursTotal
Attendance152 h30 h
Pre/post processing154 h60 h
90 h

Modellbildung und Steuergeräteoptimierung in der Automobilelektronik (Internship)

Workload descriptionMultiplierHoursTotal
Präsenzzeit82 h16 h
Protokolle158 h58 h
Vor- und Nachbearbeitung28 h16 h
90 h

Mustererkennung und Technische Diagnose (Internship)

Workload descriptionMultiplierHoursTotal
Präsenzzeit82 h16 h
Prtotokollle158 h58 h
Vor- und Nachbereitung82 h16 h
90 h

Mustererkennung und Technische Diagnose (Lecture)

Workload descriptionMultiplierHoursTotal
Präsenzzeit152 h30 h
Vor-/Nachbereitung154 h60 h
90 h

The workload of the module adds up to 360 hours. The module therefore comprises 12 credit points.

Description of teaching and learning methods

* Vorlesungen (VL): Frontalvortrag
* Praktikum (PR): eigenstandige Bearbeitung von Aufgaben

Requirements for participation and examination

Desirable prerequisites for participation in the courses:

Grundlagen der Messdatenverarbeitung, Regelungstechnik, Elektronikgrundkenntnisse, Kenntnisse in der mathematisch-technischen Programmiersprache MATLAB® / Simulink®

Mandatory requirements for the module examination registration:

The examination requirements could not be retrieved.

Completion of the module

GradingGraded
Exam formatWritten exam
LanguageGerman
Duration/Extent150 min

Exam description

Insgesamt können 100 Portfoliopunkte erreicht werden:
* Vorlesungen (50 Portfoliopunkte)
* Praktikum oder Projekt (insgesamt 50 Portfoliopunkte)

Im Rahmen des Praktikums und Projektes sind jeweils verschiedene Studienleistungen zu erbringen. Ihre Art und Gewichtung in Portfoliopunkten sind in der unten stehenden Tabelle aufgeführt.

Die Gesamtnote gemäß §47 (2) AllgStuPO wird nach dem Notenschlüssel 2 der Fakultät IV ermittelt.

Duration of the module

The following number of semesters is estimated for taking and completing the module: 2 semester(s).

This module can be started in the following semesters: Winter and summer semester.

Maximum number of participants

The maximum capacity of participants is 40.

Registration procedures

Anmeldung für die Projekte und Praktika im Sekretariat EN 13 (üblicherweise vor bzw. zu Beginn der Vorlesungszeit). Siehe http://www.mdt.tu-berlin.de
Die Anmeldeformalitäten für die Portfolioprüfung werden in der ersten Vorlesung der betreffenden Veranstaltung bekannt gegeben.

Recommended reading, lecture notes

Lecture notes

unavailable

Electronic lecture notes

unavailable

Recommended literature

  • : Kraftfahrtechnische s Taschenbuch., 25. Auflage, Wiesbaden, Vieweg Verlag, 2004
  • Angermann, A.; Beuschel, M.; Rau, M.; Wohl farth, U.: Matlab-Simulink-Stateflow. Oldenbourg- Verlag 2003
  • Bosch: Autoelektrik – Autoelektronik. Systeme und Komponenten, 5. Auflage 2007
  • Bosch: Autoelektrik – Autoelektr onik am Ottomotor VDI-Verlag, 1994
  • Bosch: Diesel-Motormangement, 4. Auflage, Wiesbaden, Vieweg Verlag 2004
  • Bosch: Otto-Motormangement, 3. Auflage, Wiesbaden, Vieweg Verlag 2005
  • Brammer, K.; Siffling, G. (1985): Kalman- Bucy-Filters. Deterministische Beobachtung und stochastische Filterung. Oldenbourg Verlag
  • Brammer, K.; Siffling, G. (1985): Stochastis che Grundlagen des Kalmna-Bucy-Filters. Wahr- scheinlichkeitsrechnung und Zufallsprozesse. Oldenbourg Verlag
  • Brause; R: Neuronale Netze Stuttgart, Teubner
  • Brause; R: Neuronale Netze Stuttgart, Teubner
  • Cellier, F., E.: Continous System Simulation. Springer, 2006
  • Chen, J.; Patton, R.J. (1998): Robust Model Based Fault Diagnosis for Dynamic Systems. Bos- ton: Kluwer Academic Publishers.
  • Duda, R. O.; Hart, P. E.(2000): Pattern Classification.
  • Frank, P. H. (1994): Diagnoseverfahren in der Automatisierungstechnik. at – Automatisierungs- technik 42. R. Oldenbourg Verlag.
  • Gipser, M.: Systemdynamik und Simulation. B. G. Teubner Stuttgart – Leipzig 1999
  • Halfmann, C.; Holzmann, H.(2003): Adaptive Modelle für die Kfz-Dynamik. Springer Verlag
  • Haykin, S (1994): Neural Networks A Comprehensive Foundation Prentice Hall
  • Isermann, R. (1988): Identifikation dyna mischer Systeme. Band I und II. Springer-Verlag
  • Isermann, R. (1988): I dentifikation dynamisc her Systeme. Band I und II. Springer-Verlag
  • Isermann, R. (2006): Fault- Diagnosis Systems. An Introduction from Fault Detection to Fault Tolerance. Springer Verlag
  • Janczak, A.: Identification of Nonlinear Sy stems Using Neural Networks and Polynomial Models.
  • Krüger, M.: Grundlagen der Kfz-Elektronik, Hanser-Verlag, 2004
  • Merker, Schwarz, Stiesch, Otto: Verbrennungsmotoren Simulation der Verbrennung und Schad- stoffbildung, überarb. und akt. Auflage, Teubner, 2006. ISBN: 978-3-8351-0080-0
  • Nelles, Oliver: Nonlinear Sy stem Identification From Classica l Approaches to Neural Networks and Fuzzy Models. Springer Verlag GmbH & Co., Berlin
  • Niemann, H. (1983):Klassifikation von Mustern. Springer-Verlag, Berlin.
  • Otter, M., und andere: Objektorientierte Modellie rung Physikalischer Systeme Aufsatzreihe in Automatisierungstechnik (AT) Teil 1 - 17, at 1999- at 12/2000
  • Parsons, T. (1987): Voice and Speech Processing. McGraw-Hill Book Company.
  • Reif, K.: Automobilelektro nik ATZ/MTZ-Fachbuch, 2006
  • Rojas, R (1996): Theorie der neuronalen Netz e. Eine systematische Einführung; Springer Verlag
  • Röpke, K.; et al.: DoE – Design of Experiments. Verlag Moderne Industrie 2005
  • Simani, S.; Fantuzzi, C.;Patton, R.J. (2003) : Model-based Fault Diagnosis in Dynamic Systems Using Identification Techniques, Springer-Verlag
  • Tiller, M: Introduction to Physical Modelling wi th Modelica. Kluwer Academic Publishers (2001)
  • Unbehauen, H.: Regelungstechnik I. Klassische Verfahren zur Analyse und Synthese linearer kontinuierlicher Systeme. Vieweg Verlag
  • Wallentowitz, H.; Reif, K.:Handbuch der Kr aftfahrzeugelektronik. Grundlagen, Komponenten, Systeme und Anwendungen Vieweg ATZ/MTZ-Fachbuch, 2006
  • Zimmermann, W.; Schmidgall, R.:Bussysteme in der Fahrzeugtechnik ATZ/MTZFachbuch, 2006
  • Zirn, O.: Modellbildung und Simulation mechatronischer Systeme. Expert Verlag 2002

Assigned programs

This module is not used in any program.

Miscellaneous

Das Praktikum kann nur bei ausreichenden Ausstattung (wissenschaftliche Mitarbeiter) angeboten werden.