MetrologyModule description #40558 / Version 11
- 12 CP
- Portfolio examination
- Graded
- Winter and summer semester
- English
This module description is not valid in the current semester (Winter semester 2026/27).
| Module / Version | #40558 / #11 |
|---|---|
| Validity | Summer semester 2024 – Summer semester 2024 |
| Available language(s) | English |
| Credit points | 12 |
| Person responsible for the module | Thewes, Roland |
| Grading | Graded |
| Exam format | Portfolio examination |
| Language(s) of instruction | English |
Affiliation
| Faculty | Fakultät IV |
|---|---|
| Institute | Institut für Energie und Automatisierungstechnik |
| Academic chair | 34311700 FG Sensorik und Aktuatorik / Messtechnik |
Contact
| Office | E 3 |
|---|---|
| Contact person | Boldt, Niklas Philip |
| E-mail address | lehre@se.tu-berlin.de |
| Website | http://www.se.tu-berlin.de |
Learning outcomes
Once the students have completed the module successful, they hold advanced knowledge in the field of sensors and actuators. They are able to conceive and analyse specific problems regarding measurement and control of physical values, for which the formulate appropriate solutions in terms of circuits and sensor interfaces and eventually realize them. Furthermore they are qualified to develop research approaches and describe the results scientifically.
Content
The module "Metrology" prioritises the acquirement of basic methodological and application-oriented knowledge to determine physical values. Used physical effects, theoretical fundamentals and corresponding sensors are presented in the lecture and the exercises. Based on metrological tasks and lab experiments the practical course aims at usage and consolidation of previously achieved knowledge through the lectures. The aim of the training is to gain the ability to analyse a metrological problem, to select sensors and methods to solve the problem and eventually to propose and realise practical solutions .
Elementary metrological terms, physical effects, metrological principles, typical parameters and transfer characteristics of sensors for mechanical, thermal, optical and chemical values are discussed in the lecture „Measurement of Non-Electrical Quantities“. Furthermore ultrasonic methods and laser based metrological methods are discussed as well. Additional exercises are associated to the respective chapters in the lecture, where metrological question are solved by calculations. Teaching language is English.
In particular sensors and actuators based on silicon respectively CMOS-process are discussed in the lecture „Smart Sensors & Actuators I + II". The contents range from solid body physical fundamentals, functional principles, designs and typical parameters to adequate integrated circuits for readout and operation of sensors and actuators. Examples for the discussed fields are integrated temperature sensors, PTAT (proportional to absolute temperature) circuits, precision limited artefacts and its compensation, electro thermal filter, photodiodes and photodiode arrays for CMOS-cameras, CCD, active pixels, CMOS-imaging, accelerometer, and gyroscopes, MEMS-technology, digital micro mirror arrays, DLP technology. Teaching language is English.
The practical course „Lab: Measurement of Non-Electrical Quantities" covers the technical realisations, which are discussed in the lectures.
Elementary metrological terms, physical effects, metrological principles, typical parameters and transfer characteristics of sensors for mechanical, thermal, optical and chemical values are discussed in the lecture „Measurement of Non-Electrical Quantities“. Furthermore ultrasonic methods and laser based metrological methods are discussed as well. Additional exercises are associated to the respective chapters in the lecture, where metrological question are solved by calculations. Teaching language is English.
In particular sensors and actuators based on silicon respectively CMOS-process are discussed in the lecture „Smart Sensors & Actuators I + II". The contents range from solid body physical fundamentals, functional principles, designs and typical parameters to adequate integrated circuits for readout and operation of sensors and actuators. Examples for the discussed fields are integrated temperature sensors, PTAT (proportional to absolute temperature) circuits, precision limited artefacts and its compensation, electro thermal filter, photodiodes and photodiode arrays for CMOS-cameras, CCD, active pixels, CMOS-imaging, accelerometer, and gyroscopes, MEMS-technology, digital micro mirror arrays, DLP technology. Teaching language is English.
The practical course „Lab: Measurement of Non-Electrical Quantities" covers the technical realisations, which are discussed in the lectures.
Module components
Compulsory area
The following courses are mandatory for this module:
| Courses | Type | Number | Frequency | Language | Hours per week | Course catalog |
|---|---|---|---|---|---|---|
| Measurement of Non-Electrical Quantities II (MT II) | Lecture | 0430 L 214 | Summer semester | – | 2 | ISIS |
| Measurement of Non-Electrical Quantities II (MT II) | Exercise | 0430 L 214 | Summer semester | – | 2 | ISIS |
Compulsory elective area
A selection of the following courses must be completed:
| Courses | Type | Number | Frequency | Language | Hours per week | Course catalog |
|---|---|---|---|---|---|---|
| Messtechnik - Praktikum - MT II | Internship | 0430 L 435 | Winter semester | – | 4 | WS 2026/27 (7) ISIS |
| Smart Sensors and Actuators I+II | Integrated course | 0430 L 412 | Winter semester | – | 4 | WS 2026/27 (1) ISIS |
Courses in the course catalog
Courses created from the teaching units of this module.
Winter semester 2026/27 (8)
Messtechnik - Praktikum - MT II (Internship) 7
- Lab: Measurement of Non-Electrical Quantities (Praktikum) Einführungsveranstaltung/Gruppeneinteilung 0430 L 435
- Lab: Measurement of Non-Electrical Quantities (Praktikum) Gruppe 1 0430 L 435
- Lab: Measurement of Non-Electrical Quantities (Praktikum) Gruppe 2 0430 L 435
- Lab: Measurement of Non-Electrical Quantities (Praktikum) Gruppe 3 0430 L 435
- Lab: Measurement of Non-Electrical Quantities (Praktikum) Gruppe 4 0430 L 435
- Lab: Measurement of Non-Electrical Quantities (Praktikum) Gruppe 5 0430 L 435
- Lab: Measurement of Non-Electrical Quantities (Praktikum) Gruppe 6 0430 L 435
Smart Sensors and Actuators I+II (Integrated course) 1
- Smart Sensors and Actuators I+II (Integrierte Veranstaltung) 1. Termingruppe 0430 L 412
Workload and credit points
Measurement of Non-Electrical Quantities II (MT II) (Lecture)
| Workload description | Multiplier | Hours | Total |
|---|---|---|---|
| Attendance | 15 | 2 h | 30 h |
| Pre/post processing | 15 | 2 h | 30 h |
| Preparation time for exam | 15 | 2 h | 30 h |
| 90 h | |||
Measurement of Non-Electrical Quantities II (MT II) (Exercise)
| Workload description | Multiplier | Hours | Total |
|---|---|---|---|
| Attendance | 15 | 2 h | 30 h |
| Pre/post processing | 15 | 2 h | 30 h |
| Preparation time for exam | 15 | 2 h | 30 h |
| 90 h | |||
Messtechnik - Praktikum - MT II (Internship)
| Workload description | Multiplier | Hours | Total |
|---|---|---|---|
| Attendance | 15 | 4 h | 60 h |
| Pre/post processing | 15 | 8 h | 120 h |
| 180 h | |||
Smart Sensors and Actuators I+II (Integrated course)
| Workload description | Multiplier | Hours | Total |
|---|---|---|---|
| Attendance | 15 | 4 h | 60 h |
| Pre/post processing | 15 | 4 h | 60 h |
| Preparation time for exam | 15 | 4 h | 60 h |
| 180 h | |||
The workload of the module adds up to 540 hours. The module therefore comprises 12 credit points.
Description of teaching and learning methods
The teaching contents are transferred via lectures, exercises and practical courses.
Teaching language of this module (lectures, exercises and exams) is english.
Teaching language of this module (lectures, exercises and exams) is english.
Requirements for participation and examination
Desirable prerequisites for participation in the courses:
Contentual knowledge from the module „Grundlagen der elektronischen Messtechnik“ is assumed.
Mandatory requirements for the module examination registration:
This module has no examination requirements.
Completion of the module
| Grading | Graded |
|---|---|
| Exam format | Portfolio examination |
| Type of portfolio examination | 100 points in total |
| Language | English |
Test elements
| Name | Points/Weight | Category | Duration/Extent |
|---|---|---|---|
| VL + UE "Measurement of Non-Electrical Quantities II (MT II)" | 50 | oral | 20 min |
| Elective Course | 50 | flexibel | look at description |
Exam description
The porfolio score is limited to 100. According to § 68 (2) AllgStuPO, the grades will be determined with the key of grades 2.
Lab: Measurement of Non-Electrical Quantities:
Both the preparation for the corresponding experiment and the execution of the experiment are examined (learning process evaluation, 10 min question, 10 points). Each laboratory experiment is also examined in the form of a written report (5-6 pages per report) (results examination, 40 points).
Smart Sensors and Actuators I + II:
Examined by a 20 minute oral examination at the end of the semester (learning process evaluation, 50 points).
Measurement of Non-Electrical Quantities (VL + UE):
Examined by a 20 minute oral examination at the end of the semester (learning process evaluation, 50 points).
Lab: Measurement of Non-Electrical Quantities:
Both the preparation for the corresponding experiment and the execution of the experiment are examined (learning process evaluation, 10 min question, 10 points). Each laboratory experiment is also examined in the form of a written report (5-6 pages per report) (results examination, 40 points).
Smart Sensors and Actuators I + II:
Examined by a 20 minute oral examination at the end of the semester (learning process evaluation, 50 points).
Measurement of Non-Electrical Quantities (VL + UE):
Examined by a 20 minute oral examination at the end of the semester (learning process evaluation, 50 points).
Duration of the module
The following number of semesters is estimated for taking and completing the module: 2 semester(s).
This module can be started in the following semesters: Winter and summer semester.
Maximum number of participants
This module is not limited to a number of students.
Registration procedures
Register for the module @ first lecture.
Recommended reading, lecture notes
Lecture notes
unavailable
Electronic lecture notes
available
Recommended literature
- References can be found in the respective experiment descriptions or in the respective scripts.
Assigned programs
This module version is used in the following programs:
| Program / program version | Semester(s) | Curriculum component |
|---|---|---|
| Industrial Engineering and Management Industrial Engineering and Management (M. Sc.) - StuPO 2015 | SS 2024 | Ingenieurwissenschaftliche Studienrichtungen/Engineering Majors › Elektrotechnik/Electrical Engineering (ET) › Elektrotechnik/Electrical Engineering (Wahlpflicht/Compulsory-Elective) › Automation & Control |
Miscellaneous
Not specified