MetrologyModule description #40558 / Version 6
- 12 CP
- Portfolio examination
- Graded
- Winter and summer semester
- English, German
This module description is not valid in the current semester (Winter semester 2026/27).
| Module / Version | #40558 / #6 |
|---|---|
| Validity | WS 2017/18 – SS 2019 |
| Available language(s) | English, German |
| Credit points | 12 |
| Person responsible for the module | Thewes, Roland |
| Grading | Graded |
| Exam format | Portfolio examination |
| Language(s) of instruction | English, German |
Affiliation
| Faculty | Fakultät IV |
|---|---|
| Institute | Institut für Energie und Automatisierungstechnik |
| Academic chair | 34311700 FG Sensorik und Aktuatorik / Messtechnik |
Contact
| Office | E 3 |
|---|---|
| Contact person | Boldt, Niklas Philip |
| E-mail address | lehre@se.tu-berlin.de |
| Website | http://www.se.tu-berlin.de |
Learning outcomes
The module "Metrology" prioritises the acquirement of basic methodological and application-oriented knowledge to determine physical values. Used physical effects, theoretical fundamentals and corresponding sensors are presented in the lecture and the exercises. Based on metrological tasks and lab experiments the practical course aims at usage and consolidation of previously achieved knowledge through the lectures. The aim of the training is to gain the ability to analyse a metrological problem, to select sensors and methods to solve the problem and eventually to propose and realise practical solutions .
Content
Elementary metrological terms, physical effects, metrological principles, typical parameters and transfer characteristics of sensors for mechanical, thermal, optical and chemical values are discussed in the lecture „Measurement of Non-Electrical Quantities II (MT II)“. Furthermore ultrasonic methods and laser based metrological methods are discussed as well. Additional exercises are associated to the respective chapters in the lecture, where metrological question are solved by calculations. Teaching language is englich.
In particular sensors and actuators based on silicon respectively CMOS-process are discussed in the lecture „Smart Sensors & Actuators I + II". The contents range from solid body physical fundamentals, functional principles, designs and typical parameters to adequate integrated circuits for readout and operation of sensors and actuators. Examples for the discussed fields are integrated temperature sensors, PTAT (proportional to absolute temperature) circuits, precision limited artifacts and its compensation, electro thermal filter, photodiodes and photodiode arrays for CMOS-cameras, CCD, active pixels, CMOS-imaging, accelerometer, and gyroscopes, MEMS-technology, digital micro mirror arrays, DLP technology. Teaching language is english.
The practical course „Messtechnik-Praktikum MT II" covers the technical realisations, which are discussed in the lecture.
In particular sensors and actuators based on silicon respectively CMOS-process are discussed in the lecture „Smart Sensors & Actuators I + II". The contents range from solid body physical fundamentals, functional principles, designs and typical parameters to adequate integrated circuits for readout and operation of sensors and actuators. Examples for the discussed fields are integrated temperature sensors, PTAT (proportional to absolute temperature) circuits, precision limited artifacts and its compensation, electro thermal filter, photodiodes and photodiode arrays for CMOS-cameras, CCD, active pixels, CMOS-imaging, accelerometer, and gyroscopes, MEMS-technology, digital micro mirror arrays, DLP technology. Teaching language is english.
The practical course „Messtechnik-Praktikum MT II" covers the technical realisations, which are discussed in the lecture.
Module components
Compulsory area
The following courses are mandatory for this module:
| Courses | Type | Number | Frequency | Language | Hours per week | Course catalog |
|---|---|---|---|---|---|---|
| Measurement of Non-Electrical Quantities II (MT II) | Lecture | 0430 L 214 | Summer semester | – | 2 | ISIS |
| Measurement of Non-Electrical Quantities II (MT II) | Exercise | 0430 L 214 | Summer semester | – | 2 | ISIS |
Compulsory elective area
A selection of the following courses must be completed:
| Courses | Type | Number | Frequency | Language | Hours per week | Course catalog |
|---|---|---|---|---|---|---|
| FEM-Simulation von Mikrosensoren und -aktuatoren | Integrated course | 0430 L 442 | Winter semester | – | 4 | ISIS |
| Messtechnik - Praktikum - MT II | Internship | 0430 L 435 | Winter semester | – | 4 | WS 2026/27 (7) ISIS |
| Smart Sensors and Actuators I+II | Integrated course | 0430 L 412 | Winter semester | – | 4 | WS 2026/27 (1) ISIS |
Courses in the course catalog
Courses created from the teaching units of this module.
Winter semester 2026/27 (8)
Messtechnik - Praktikum - MT II (Internship) 7
- Lab: Measurement of Non-Electrical Quantities (Praktikum) Einführungsveranstaltung/Gruppeneinteilung 0430 L 435
- Lab: Measurement of Non-Electrical Quantities (Praktikum) Gruppe 1 0430 L 435
- Lab: Measurement of Non-Electrical Quantities (Praktikum) Gruppe 2 0430 L 435
- Lab: Measurement of Non-Electrical Quantities (Praktikum) Gruppe 3 0430 L 435
- Lab: Measurement of Non-Electrical Quantities (Praktikum) Gruppe 4 0430 L 435
- Lab: Measurement of Non-Electrical Quantities (Praktikum) Gruppe 5 0430 L 435
- Lab: Measurement of Non-Electrical Quantities (Praktikum) Gruppe 6 0430 L 435
Smart Sensors and Actuators I+II (Integrated course) 1
- Smart Sensors and Actuators I+II (Integrierte Veranstaltung) 1. Termingruppe 0430 L 412
Workload and credit points
Measurement of Non-Electrical Quantities II (MT II) (Lecture)
| Workload description | Multiplier | Hours | Total |
|---|---|---|---|
| Präsenzzeit | 15 | 2 h | 30 h |
| Vor-/Nachbereitung | 15 | 2 h | 30 h |
| Vorbereitungszeit für Prüfung | 15 | 2 h | 30 h |
| 90 h | |||
Measurement of Non-Electrical Quantities II (MT II) (Exercise)
| Workload description | Multiplier | Hours | Total |
|---|---|---|---|
| Präsenzzeit | 15 | 2 h | 30 h |
| Vor-/Nachbereitung | 15 | 2 h | 30 h |
| Vorbereitungszeit für Prüfung | 15 | 2 h | 30 h |
| 90 h | |||
FEM-Simulation von Mikrosensoren und -aktuatoren (Integrated course)
| Workload description | Multiplier | Hours | Total |
|---|---|---|---|
| Präsenzzeit | 15 | 4 h | 60 h |
| Vor-/Nachbereitung | 15 | 8 h | 120 h |
| 180 h | |||
Messtechnik - Praktikum - MT II (Internship)
| Workload description | Multiplier | Hours | Total |
|---|---|---|---|
| Präsenzzeit | 15 | 4 h | 60 h |
| Vor-/Nachbereitung | 15 | 8 h | 120 h |
| 180 h | |||
Smart Sensors and Actuators I+II (Integrated course)
| Workload description | Multiplier | Hours | Total |
|---|---|---|---|
| Präsenzzeit | 15 | 4 h | 60 h |
| Vor-/Nachbereitung | 15 | 4 h | 60 h |
| Vorbereitungszeit für Prüfung | 15 | 4 h | 60 h |
| 180 h | |||
The workload of the module adds up to 720 hours. The module therefore comprises 12 credit points.
Description of teaching and learning methods
Die Lehrinhalte werden vermittelt durch Vorlesungen, Übungen und Praktika.
Das Modul findet in deutscher und/oder englischer Sprache statt (Praktikum wahlweise Deutsch oder Englisch).
The teaching contents are transferred via lectures, exercises and practical courses.
Teaching language is german and/or english (practical course either german or english).
Das Modul findet in deutscher und/oder englischer Sprache statt (Praktikum wahlweise Deutsch oder Englisch).
The teaching contents are transferred via lectures, exercises and practical courses.
Teaching language is german and/or english (practical course either german or english).
Requirements for participation and examination
Desirable prerequisites for participation in the courses:
Inhaltlich werden die Kenntnisse im Modul „Grundlagen der elektronischen Messtechnik“ vorausgesetzt.
Contentual knowledge from the module „Grundlagen der elektronischen Messtechnik“ is assumed.
Contentual knowledge from the module „Grundlagen der elektronischen Messtechnik“ is assumed.
Mandatory requirements for the module examination registration:
This module has no examination requirements.
Completion of the module
| Grading | Graded |
|---|---|
| Exam format | Portfolio examination |
| Type of portfolio examination | 100 points in total |
| Language | English, German |
Test elements
| Name | Points/Weight | Category | Duration/Extent |
|---|---|---|---|
| (Punktuelle Leistungsabfrage) VL + UE "Measurement of Non-Electrical Quantities II (MT II)", schriftlicher Test | 52 | written | 90 min |
| Wahlkurse | 48 | flexibel | siehe Beschreibung |
Exam description
Insgesamt können 100 Portfoliopunkte erreicht werden. Die Gesamtnote gemäß § 47 (2) AllgStuPO wird nach dem Notenschlüssel 2 der Fakultät IV ermittelt. (The porfolio score is limited to 100. According to § 47 (2) AllgStuPO, the grades will be determined with the key of grades 2.)
FEM-Simulation von Mikrosensoren und -aktuatoren: Geprüft wird zum Einen die Ausarbeitung eines Protokolls (>50 Seiten), welches alle Übungen beinhaltet (Ergebnisprüfung, 20 Punkte) und zum Anderen durch einen schriftlichen Test am Ende des Semesters (Punktuelle Leistunsabfrage, 90 min, 28 Punkte).
Messtechnik - Praktikum - MT II: Geprüft werden sowohl die Vorbereitung auf den entsprechenden Versuch als auch die Versuchsdurchführung (Lernprozessevaluation, 10 min Abfrage, 10 Punkte). Jeder Laborversuch wird zudem durch eine schriftliche Ausarbeitung in Form eines Protokolls (5-6 Seiten pro Protokoll) geprüft (Ergebnisprüfung, 38 Punkte).
Smart Sensors and Actuators I + II: Geprüft wird durch eine 40 - 45 minütige mündliche Rücksprache am Ende des Semesters (Lernprozessevaluation, 48 Punkte).
Measurement of Non-Electrical Quantities II (MT II) VL + UE: Die Übungen werden durch einen schriftlichen Test am Ende des Semesters geprüft. Die Vorlesung wird durch eine 40 - 45 minütige Rücksprache am Ende des Semesters geprüft.
FEM-Simulation von Mikrosensoren und -aktuatoren: Geprüft wird zum Einen die Ausarbeitung eines Protokolls (>50 Seiten), welches alle Übungen beinhaltet (Ergebnisprüfung, 20 Punkte) und zum Anderen durch einen schriftlichen Test am Ende des Semesters (Punktuelle Leistunsabfrage, 90 min, 28 Punkte).
Messtechnik - Praktikum - MT II: Geprüft werden sowohl die Vorbereitung auf den entsprechenden Versuch als auch die Versuchsdurchführung (Lernprozessevaluation, 10 min Abfrage, 10 Punkte). Jeder Laborversuch wird zudem durch eine schriftliche Ausarbeitung in Form eines Protokolls (5-6 Seiten pro Protokoll) geprüft (Ergebnisprüfung, 38 Punkte).
Smart Sensors and Actuators I + II: Geprüft wird durch eine 40 - 45 minütige mündliche Rücksprache am Ende des Semesters (Lernprozessevaluation, 48 Punkte).
Measurement of Non-Electrical Quantities II (MT II) VL + UE: Die Übungen werden durch einen schriftlichen Test am Ende des Semesters geprüft. Die Vorlesung wird durch eine 40 - 45 minütige Rücksprache am Ende des Semesters geprüft.
Duration of the module
The following number of semesters is estimated for taking and completing the module: 2 semester(s).
This module can be started in the following semesters: Winter and summer semester.
Maximum number of participants
This module is not limited to a number of students.
Registration procedures
Die Anmeldung zur Modulprüfung erfolgt über QISPOS (Studierende ohne entspr. QISPOS-Rechte melden sich beim Prüfungsamt an).
Für die Teilnahme an der IV "FEM-Simulation von Mikrosensoren und -aktuatoren" ist wegen beschränkter Teilnehmerzahl eine Anmeldung erforderlich. Aktuelle Informationen zur IV und zur Anmeldung: http://www.avt.tu-berlin.de
Apply for this course through QISPOS system (students without corresponding QISPOS-access apply through Prüfungsamt).
Due to limited attendance, enrollment for "FEM-Simulation von Mikrosensoren und -aktuatoren" is required. Find recent information about this course and the enrollment on http://www.avt.tu-berlin.de.
Für die Teilnahme an der IV "FEM-Simulation von Mikrosensoren und -aktuatoren" ist wegen beschränkter Teilnehmerzahl eine Anmeldung erforderlich. Aktuelle Informationen zur IV und zur Anmeldung: http://www.avt.tu-berlin.de
Apply for this course through QISPOS system (students without corresponding QISPOS-access apply through Prüfungsamt).
Due to limited attendance, enrollment for "FEM-Simulation von Mikrosensoren und -aktuatoren" is required. Find recent information about this course and the enrollment on http://www.avt.tu-berlin.de.
Recommended reading, lecture notes
Lecture notes
available – Printed scripts are available in the 1st lecture. No digital copies are provided!
Electronic lecture notes
unavailable
Recommended literature
- Literaturhinweise befinden sich in den jeweiligen Versuchsbeschreibungen.
Assigned programs
This module is not used in any program.
Miscellaneous
Not specified