Project-Oriented Practical CourseModule description #40655 / Version 2
- 6 CP
- Portfolio examination
- Ungraded
- Winter and summer semester
- German
This module description is not valid in the current semester (Winter semester 2026/27).
Current version (v10)
| Module / Version | #40655 / #2 |
|---|---|
| Validity | WS 2015/16 – WS 2015/16 |
| Available language(s) | German |
| Credit points | 6 |
| Person responsible for the module | Orglmeister, Reinhold |
| Grading | Ungraded |
| Exam format | Portfolio examination |
| Language(s) of instruction | German |
Affiliation
| Faculty | Fakultät IV |
|---|---|
| Institute | Institut für Hochfrequenz und Halbleiter-Systemtechnologien |
| Academic chair | 34321200 FG Hochfrequenzsysteme (HFS) |
Contact
| Office | HFT 1-1 |
|---|---|
| Contact person | Ali, Kussai Elfares Mohamed Osman |
| E-mail address | k.ali@tu-berlin.de |
| Website | https://www.tu.berlin/hfs |
Learning outcomes
The students have the following skills:
• Analytical and methodical skills as well as methods for autonomous planing, organization, and documentation of projects.
• Fundamental knowledge of electronic and digital basic circuits.
• Synthesis between learned component theory and practical application.
• Applying the studied theory to analog and digital circuits, including circuit design, setup, analysis and simulation.
• Hands-on experience with analog and digital circuits as well as the necessary measurement equipment.
• Fundamentals of scientific documentation of their own work.
• Presentation of their own work.
• Teamwork.
• Awareness of the necessity of independent study and acting responsibly.
• Analytical and methodical skills as well as methods for autonomous planing, organization, and documentation of projects.
• Fundamental knowledge of electronic and digital basic circuits.
• Synthesis between learned component theory and practical application.
• Applying the studied theory to analog and digital circuits, including circuit design, setup, analysis and simulation.
• Hands-on experience with analog and digital circuits as well as the necessary measurement equipment.
• Fundamentals of scientific documentation of their own work.
• Presentation of their own work.
• Teamwork.
• Awareness of the necessity of independent study and acting responsibly.
Content
• Methodical knowledge inf form of planing and organizing projects (timetables, milestones, dividing the task in work packets, interfaces).
• Technical knowledge in form of project-referenced reports or student workshops.
• Fundamental practical skills needed to realize and use an electronic analog/digital circuit (including circuit design, analysis, setup and test).
• Documentation and presentation of one's own work (logs, final presentations, final reports, handouts).
• Elaboration of basic knowledge with computer-aided circuit- and component simulation, and documentation thereof.
• Simulated observation of various components at different voltages and environmental influences.
• Composing and digitizing a circuit layout under formal constraints.
• Solving issues as a team.
If available:
• Department-overreaching insights into research and industry by visiting institutes/businesses.
• Imparting extra knowledge through workshops and theme-evenings.
• Technical knowledge in form of project-referenced reports or student workshops.
• Fundamental practical skills needed to realize and use an electronic analog/digital circuit (including circuit design, analysis, setup and test).
• Documentation and presentation of one's own work (logs, final presentations, final reports, handouts).
• Elaboration of basic knowledge with computer-aided circuit- and component simulation, and documentation thereof.
• Simulated observation of various components at different voltages and environmental influences.
• Composing and digitizing a circuit layout under formal constraints.
• Solving issues as a team.
If available:
• Department-overreaching insights into research and industry by visiting institutes/businesses.
• Imparting extra knowledge through workshops and theme-evenings.
Module components
Compulsory area
The following courses are mandatory for this module:
| Courses | Type | Number | Frequency | Language | Hours per week | Course catalog |
|---|---|---|---|---|---|---|
| Projektorientiertes Praktikum | Project | 0430 L 120 | Winter and summer semester | – | 6 | ISIS |
Workload and credit points
Projektorientiertes Praktikum (Project)
| Workload description | Multiplier | Hours | Total |
|---|---|---|---|
| Erbringung der Prüfungsleistungen | 1 | 40 h | 40 h |
| Präsenszeit | 15 | 6 h | 90 h |
| Vor- und Nachbereitung | 1 | 50 h | 50 h |
| 180 h | |||
The workload of the module adds up to 180 hours. The module therefore comprises 6 credit points.
Description of teaching and learning methods
Grundlegende praktische Fähigkeiten und Basiswissen werden in studentischen Vorträgen / Workshops vermittelt und von den Studierenden eigenständig vertieft. Die Teilnehmenden und die Betreuer schlagen Projekte vor, von denen die Studierenden eines auswählen und in mehreren Teilgruppen, die jeweils einen eigenständigen Teil des Gesamtprojektes entwickeln, selbstständig bearbeiten.
Requirements for participation and examination
Desirable prerequisites for participation in the courses:
• Wissen aus den Modulen der ersten drei Semester des Grundstudiums (insb. Grundl. d. Elektrotechnik,
Grundl. d. elektrischen Messtechnik, Elektrische Netzwerke, Halbleiterbauelemente)
• Grundlegendes Wissen für den Umgang mit Labormessgeräten (insb. Strom-/Spannungsmessgeräte,
Oszilloskop)
Vorteilhaftes Vorwissen:
• Kenntnisse im Umgang mit Operationsverstärkern und Bipolar-/Feldeffekttansistoren
• Erfahrung bei der Entwicklung Controllergestützter Anwendungen
• Grundlegende LaTeX-Kenntnisse
Grundl. d. elektrischen Messtechnik, Elektrische Netzwerke, Halbleiterbauelemente)
• Grundlegendes Wissen für den Umgang mit Labormessgeräten (insb. Strom-/Spannungsmessgeräte,
Oszilloskop)
Vorteilhaftes Vorwissen:
• Kenntnisse im Umgang mit Operationsverstärkern und Bipolar-/Feldeffekttansistoren
• Erfahrung bei der Entwicklung Controllergestützter Anwendungen
• Grundlegende LaTeX-Kenntnisse
Mandatory requirements for the module examination registration:
This module has no examination requirements.
Completion of the module
| Grading | Ungraded |
|---|---|
| Exam format | Portfolio examination |
| Language | German |
Test elements
| Name | Points/Weight | Category | Duration/Extent |
|---|---|---|---|
| protokollierte praktische Leistung 1 | 10 | ||
| protokollierte praktische Leistung 2 | 20 | ||
| protokollierte praktische Leistung 3 | 30 | ||
| Presentation | 10 | ||
| schriftliche Ausarbeitung | 30 |
Exam description
Zum Bestehen des Moduls müssen mindestens 50 von 100 Portfoliopunkten erreicht werden. Die zu erbringenden Studienleistungen setzen sich wie folgt zusammen:
- protokollierte praktische Leistung 1 (Arbeitspunkteinstellung, Messung der Ausgangssignale) 10 Punkte
- protokollierte praktische Leistung 2 (Erstellen einer bestückten Platine auf Basis eines Schaltplans)
20 Punkte
- protokollierte praktische Leistung 3 (Synthetisierung, Interpretation und Dimensionierung einer Schaltung mit Schaltplan) 30 Punkte
- Referat (Wissensvermittlung anhand eines gut vorbereiteten Vortrages mit Handout)
- schriftliche Ausarbeitung (Dokumentation der eigenen Arbeit in Form eines Berichts nach den im Skript angegebenen formellen und inhaltlichen Richtlinien)
- protokollierte praktische Leistung 1 (Arbeitspunkteinstellung, Messung der Ausgangssignale) 10 Punkte
- protokollierte praktische Leistung 2 (Erstellen einer bestückten Platine auf Basis eines Schaltplans)
20 Punkte
- protokollierte praktische Leistung 3 (Synthetisierung, Interpretation und Dimensionierung einer Schaltung mit Schaltplan) 30 Punkte
- Referat (Wissensvermittlung anhand eines gut vorbereiteten Vortrages mit Handout)
- schriftliche Ausarbeitung (Dokumentation der eigenen Arbeit in Form eines Berichts nach den im Skript angegebenen formellen und inhaltlichen Richtlinien)
Duration of the module
The following number of semesters is estimated for taking and completing the module: 1 semester(s).
This module can be started in the following semesters: Winter and summer semester.
Maximum number of participants
The maximum capacity of participants is 50.
Registration procedures
Aufgrund begrenzter Plätze ist vorab eine Anmeldung erforderlich: http://www.projektlabor.tu-berlin.de. Diese wird in der Regel zum 15.3. bzw. 15.09. frei geschaltet. Um Kollisionen mit Tutorien zu vermeiden sollte das Modul auch in Moses belegt werden: http://www.moses.tu-berlin.de. Dieses ersetzt jedoch NICHT die o.g. Anmeldung. Die Anmeldung zur Prüfung erfolgt im Laufe des Semesters über QISPOS bzw. das Prüfungsamt.
Recommended reading, lecture notes
Lecture notes
available – Wird am 1. Termin ausgegeben.
Electronic lecture notes
available – Zu finden unter: http://www.projektlabor.tu-berlin.de
Recommended literature
- Literaturhinweise und Arbeitsunterlagen werden im Internet bereitgestellt.
- Onlinekurs unter: http://www.projektlabor.tu-berlin.de/menue/onlinekurs/
Assigned programs
This module is not used in any program.
Miscellaneous
Das Projektlabor wird von dem Fachgebiet Mikroelektronik- Aufbau- und Verbindungstechniken (https://www.avt.tu-berlin.de/) und dem Fachgebiet für Elektronik und medizinische Signalverarbeitung (http://www.emsp.tu-berlin.de/) gemeinsam ausgerichtet.
Bei Bedarf werden im Sommersemester zwei Projekte angeboten, sodass sich eine maximale
TeilnehmerInnenzahl von 100 ergibt.
Bei Bedarf werden im Sommersemester zwei Projekte angeboten, sodass sich eine maximale
TeilnehmerInnenzahl von 100 ergibt.